Printable View
Update
3700+ SD AA5BN CABGE 0516TPAW
DFI SLI-DR
WATERCOOLED ASETEK TRIPLE RAD/ ANTARTICA / HYDOR L30
Super Pi : 27.953
http://benching.sa3doc.co.za/3700+/2...20(Medium).JPG
Suicide Shot.. got higher but was lazy and did too quick and got corrupted..
3005Mhz.. :D
http://valid.x86-secret.com/cache/29965.png
I can't seem to get stable over 3.43 for benches what is considered the maximum "safe" voltage for a FX 57 on a Mach 2 GT?
yesterday i got the $260 3700 sd special from monarch and am happy with it. i always thought sd's were a waste of money over venice but now i'm not so sure. did some burn in on it for 9 hrs while at work and this is what i got so far.
0518 UPCW
http://img175.imageshack.us/img175/3146/29003av.th.jpg
why doesn't cpu-z show val?
YAY Colder Night last night - hit over 3Ghz 1M Benchable.
Super Pi 27.671 @ 3005Mhz
http://benching.sa3doc.co.za/3700+/2...20(Medium).JPG
Suicide 3130Mhz
http://benching.sa3doc.co.za/3700+/3130.jpg
Link
:D
my 3700+ CABGE 0522XPBW @ 2,800GHZ "280X10" 1.55v "Stock cooler lol"
Gskill DSU2F1LA 1GB @ 280 2.5 3 3 8 1T
DFI LP NF4 ULTRA-D
http://img338.imageshack.us/img338/8920/29spi0iu.th.jpg
Ok, I'm on my first night of testing so I can't give you anything TOO special.
All at 11x multi
220: No problem for 3 hrs of OCCT Torture
225: No problem 1 hr
230 HTT: Only tested for 25 min, but freq too low for me I wanted to bump up
I ran 240 doing prime and OCCT and it was fine (2.64 GHz)
I tried 243 HTT (2.67 GHz) and OCCT would fail and would need 1.47 volts to get it to work. 2673 MHz @ 1.469 (1.300 * 113%) works fine for OCCT testing.
Here are the images.
2673 MHz
1.469 Vcore
http://216.77.188.54/coDataImages/p/...rimeStable.JPG
with 4x512 sticks of GSkill LE 1:1 all air. :D
http://www.atotchat.org/~montavis/dmo/comp/oc3.jpg
http://www.atotchat.org/~montavis/dmo/comp/oc4.gif
Umm I hit 2.67 with 1.5 volts, but this required MAJOR@$$ scaling to get here. I'm not too happy =( Sniff. Oh well
San Diego 3700+ CABGE 0524 XPBW
Gigabyte K8n Sli F2
2*256 Adata BH5
Xp90c + Papst 8412N/2G (40Cfm)
http://www.membres.lycos.fr/boblemag...pbw/sd3700.jpg
2507mhz at 1.42v (250x10)
http://www.membres.lycos.fr/boblemag...5-VoltCore.png
2633mhz at 1.52v (263x10)
http://www.membres.lycos.fr/boblemag...5-VoltCore.png
2702mhz at 1.6v (270x10)
http://www.membres.lycos.fr/boblemag...3-VoltCore.png
http://www.membres.lycos.fr/boblemag...bw/2700mhz.png
2772mhz at 1.66v (252x11)
http://www.membres.lycos.fr/boblemag...1-VoltCore.png
http://www.membres.lycos.fr/boblemag...1-CPUGraph.png
http://www.membres.lycos.fr/boblemag...bw/2772mhz.png
3700 sandy 0518WPAW CABHE just got it seems to not like the 11x multi with anything higher then 235ish so heres a shot of 10x280 2800mhz 1:1 im praying for 3gigs.....
peace perc,
i have a 3700 0518UPCW that doesn't do too bad on 11x. i guess there is a big diff within the same week.Quote:
Originally Posted by Perc
http://img154.imageshack.us/img154/5...9x113ew.th.jpg
this is my 24/7 with cnq on.
http://img38.imageshack.us/img38/6799/250x115ac.th.jpg
sure would be nice if people used thumbnails, even with dsl it is really moving and shaking the screen when it loads.
This is what i can do with only 1,45V vcore super pi 32mb stable.
Using a Mach1 with 507 gas, but need to refill it because i hits nearly 0 degrees with 1,7v vcore. But for the moment it runnin fine.
Also my redline pc4000 runnin fine at 265mhz and 3,4V :clap:
http://upl.silentwhisper.net/uplfold...d0/super32.jpg
More to come after some new gas in the cooling unit.
http://home.online.no/%7Eandr-sei/Fo...00stepping.JPG
http://home.online.no/%7Eandr-sei/Fo...0-air-high.JPG
http://home.online.no/%7Eandr-sei/Fosco/DFI/3700+.JPG
This is with SLK948u and 92mm papst..
Still testing, watercooling to be mounted soon
Uppdate! Now on water ( RBX ++ )
http://home.online.no/%7Eandr-sei/Fosco/DFI/29pi.JPG
0522 TPMW's suck....bigtime :(
How long and how hard have your burned it in ? Some 3700's need a lot of vcore to oc worth a damn.Quote:
Originally Posted by Tim
-3700+ SD UPMW 0525 HS off
-OCZ EL VX PC4000
-X800Pro 12 Pipes PCI Express
-Tagan 480 PSU
-Watercooled
http://www.forumdeluxx.de/gallery/da...62860UPMW1.JPG
http://www.stosstrupp-steiner.net/~C...00er-Pr0n3.jpg
My other san diego (xpmw 0524) is very bad. 2250mhz 1.4v is the maximum stable clock :(
Quote:
Originally Posted by Riverna
Dude I have an exact chip as yours but unfortunately I can pass 250*11 :confused: I think have some motherboards problems, cause with my previous CPU...Venice 3000+ 0517APAW I can get 300*9 at 1,456V but not 1 mhz more...my DFI is today going to RMA... :mad:
Regards,
Primoz
3700 0522XPMW Uppdate.
Water RBX++
http://home.online.no/%7Eandr-sei/Fosco/DFI/18p.JPG
DFI nF4 Ultra-D
Zalman 7700CU
Brand new, try 2.7GHz 1.39Vcore tomorrow :D :D
http://koti.mbnet.fi/dani69/DFI%20nF...D_stepping.JPG
http://koti.mbnet.fi/dani69/DFI%20nF..._AIR_3h14m.gif
3700+ CABGE 0516 TPAW
XP90C + 120mm papst
http://www.membres.lycos.fr/boblemag.../2853.3mhz.jpg
DFI nF4 Ultra-D
Zalman 7700CU
Stepping
2702MHz @ 1.39Vcore +15h with AIR, ambient temerature ~25ºC/80ºF
DFI nF4 Ultra-D
Zalman 7700CU, ambient temperature ~25ºC/80ºF
http://koti.mbnet.fi/dani69/DFI%20nF...D_stepping.JPG
http://koti.mbnet.fi/dani69/DFI%20nF...95_AIR_+1h.gif
uppdate : now without IHS
http://home.online.no/%7Eandr-sei/Fo...ubehandlet.JPG
http://home.online.no/%7Eandr-sei/Fosco/DFI/32m80.JPG
Uppdate again !
http://home.online.no/%7Eandr-sei/Fosco/DFI/32m30.JPG
The higher i raise the core mhz the lower i have to have the ram mhz speed is this a common thing of the san diego ?
Doesnt matter on the ram timings so much.
Current Clock