Printable View
Model: 3500+
Core: Clawhammer 0.13
Date: 0505
Stepping: caa2c
Code: APMW
Mhz: 2863
Gain: 663Mhz
Vcore: 1,55V
FSBxMulti: (260.4x11)
Divider: 1:1
Cooling: Air =)
Stable: very =) all usual benches run fine, any higher and no-go tho :P damn air
http://verimap.com/roto/28639.png
Model: 3000+
Core: 0.09
Date: 0450
Stepping: CBBHD
Code: VPEW
Mhz: 2730
Gain: 930
Vcore: 1.440V
FSBxMulti: 303 x 9
Divider: 12:11 / 180
Cooling: Water
Stable: SuperPi 32M, 3Dmark 01/03/05, Games, Aquamark, Prime95... all !
Winchester 3000+
Asus A8N-Sli Deluxe [Bios 1007]
http://img126.echo.cx/img126/86/venice9wx.jpg
I have surpassed 2.8Ghz, but he is not stable. When it has the DFI I hope to have it stable. Also I am to the delay of 1Gb Twinmos SP with Winbond UTT
:p:
Quote:
Originally Posted by SKYNET
screen shot ? That's great score
Model: 3200+ Winchester
Core: 0.09
Date: 0446
Stepping: CBBHD
Code: SPDW
Mhz: 2654Mhz
Gain: 600Mhz Gain
Vcore: 1.55v
FSBxMulti: 265.4HTTx10 (Divider at 166Mhz)
Stable: 32M SuperPi, All benches completed (3dmarks01, 03, 05)
Link: http://www.xtremesystems.org/forums/...id=30374&stc=1
Model: 3000+ :slapass: Beats The Hell Out Of My 0441
Core: 0.09
Date: 0508
Stepping: CBBID
Code: BPMW
Mhz: 2600
Gain: 600
Vcore: 1.82
FSB X Multi: 260x10 Ram 1:1
Cooling: Stock
Stable: Yes Prime 95 - 72 Hrs and counting:)
:shock: first time i see a such high vcore on stock heatsink !
Model: Whinchester 3200+
Core: 0.09
Date: 05 07
Stepping: CBBID
Code: PAW
Mhz: 2500 mhz at 1,5 vcore
Gain: 500
Vcore: 1,5
FSBxMulti: 250x10
Divider: 200
Cooling:AIR
Stable: yes
Link: http://www.webalice.it/svl444/sitoweb/home/homepage.htm
Other info:
*Ambient temp = 27°c
*Venus12 lapped and used width Amd Box fan cooler ( noiseless)
*Cpu width no IHS
*sigle: ADA 3200DIk4BI CBBID 0507D PAW
*Thermal paste : Coolermaster premium
*Case width a lot of fan
1) CPU A64 754 3200+ NewCastle.
2) 11 * 232MHz --> Gain 350MHz.
3) Handmade watercooled.
4) Rock stable! :)
5) Room temp 26C
6) CPU temp at full load --> 35C.
7) Gigabyte K8NSPro
8) Vcore = 1.744 (I use multimeter).
9) Thermal paste: Ceramique.
2,9 with stock cooling...
http://valid.x86-secret.com/show_oc?id=14205
your 7mhz short ;)Quote:
Originally Posted by tema
Model: VENICE 3200+
Core: 0.09
Date: 05 15
Stepping: LBBLE
Code: FPMW
Mhz: 2860 mhz at 1,53 vcore
Gain: 400W Aopen
Vcore: 1,53
FSBxMulti: 286x10
Divider: 200
Cooling:ZALMAN 7000B-CU
Stable: yes
Model: VENICE 3200+
Core: 0.09
Date: 05 15
Stepping: LBBLE
Code: FPMW
Mhz: 2900 mhz at 1,53 vcore
Gain: 400W Aopen
Vcore: 1,53
FSBxMulti: 290x10
Divider: 200
Cooling:ZALMAN 7000B-CU
Stable: yes
http://valid.x86-secret.com/show_oc?id=20837
Quote:
Originally Posted by gecko79
which mobo?
oh..sorry.. only DFI NF4 Ultra-D :cool:
Model: Newcastle 2800+
Core: 0.13
Date: 05 05
Stepping: ---
Code: FPMW
Mhz: 2603Mhz @ default vcore
Gain: 803Mhz
Vcore: default = 1.5v
FSBxMulti: 290x9
Divider: 166
Cooling: ThermalTake Big Typhoon
Stable: Super Pi
Link: http://members.lycos.co.uk/aichan/new_bm/2603.jpg
Model: Newcastle 2800+
Core: 0.13
Date: 0431
Stepping: CBAEC
Code: WPAW End of batch number 0027
Mhz: 2266
Gain: 466
Vcore: 1.6
FSBxMulti: 252x9
Divider: 9/10
Cooling: XP-90 w/ Panaflo M1A
Stable: stock, just came in
Link: update when i have results
pics of them just out of the package
http://img158.echo.cx/img158/5033/topnewhardware3aa.jpg
http://img158.echo.cx/img158/10/frontnewhardware3mp.jpg
board back from RMA
currently burning in at those specs... for some reason my 5/6 divider is acting wierd and is giving me 10mhz lower dram frequency than it should.... any clue?
what vcore should i expect at what frequency, generally... so i can get an idea where to start
damn i forgot to note my stepping again :slap:
Model: 3200+ Winchester
Core: 0.09
Date: ???
Stepping: ???
Code: ???
Mhz: 3001,8 Mhz
Gain: 1001,8 Mhz Gain
Vcore: 1.63v
FSBxMulti: 300.2HTTx10 (Divider at 133Mhz but just because of the less time I had - was all done in 4 hours :banana: )
and my screen....I worked for it for over 7 months and this with a very low budget. I think it is good...and more to get...priming 2960 since 1hour for burn-in :D
http://www.casextreme.net/pixx/3ghzcpuz.jpg
Greetz SoF
Model: 3000+ Winchester
Core: 0.09
Date: 0446
Stepping: CBBHD
Code: SPAW
MHz: 2790
Gain: 990
VCore: 1.65V
Stock Cooled
HTT: 310
Multi: 9
Thread Here
That 1.37v 2.7ghz of mine is H2O with G4 and MCP650 + BIP3.
Same chip will do 2.8ghz 1.57v on air with Bigtyphoon stock fan 100% stable.
It will be on sale soon as I am going through my iteration of X2
Normal oc:
---------------------------------------
Model: ClawHammer 2800+ (1800MHz)
Core: 0.13
Date: ?
Stepping: 8
MHz: 1800 @ 2205Mhz
Vcore: 1,5 @ 1,65V real
HTTxMulti: 245x9
Cooling: Zalman 7700Cu 950 rpm
Stable: Prime 95 (15 hours)
Link: Please wait... :)
Max.oc:
-----------------------------------
MHz: 1800 @ 2295MHz
Vcore: 1,5 @ 1,75V real
Cooling: Zalman 7700Cu 1650 rpm
Stable: Prime95 ...15min error! :(
MB: DFI Lanparty 250Gb + 2x512MB 500 A-DATA
Model: 3500+
Core: 0.13
Date: ?
Stepping: ?
Code: ?
Mhz: 2695
Gain: 495
Vcore: 1.671
FSBxMulti: 245*11
Divider: 1:1
Cooling: Water
Stable: yes
could go higher, but wanna keep tight ram timings and dont like asynch
Running "naked" absolutely the best 2 hours i've ever spent o/cing
Model: 3000 VENICE
Full CPU Code:
ADA3000
AA4BP
LBBLE 0520APMW
Mhz: 2.610 mhz
Gain: 810Mhz Gain
Vcore: 1.50v
FSBxMulti: 290HTTx9 (Divider at 166Mhz)
Stable: 32M SuperPi, All benches completed (3dmarks01, 03, 05)
OCZ PC3700 Gold Rev. 3
And next