can u post a screen of ur tweaker settings? , i afraid i im using some seting that causes me instability without giving me bandwidth .these r mine :
http://briefcase.pathfinder.gr/downl...64+tweaker.gif
Printable View
can u post a screen of ur tweaker settings? , i afraid i im using some seting that causes me instability without giving me bandwidth .these r mine :
http://briefcase.pathfinder.gr/downl...64+tweaker.gif
eventhought seem to have a bit relaxed (for BH-x) i wont have problem if they wok stable :D at 265
Try it, and post ur results plz! Gl! :)
didnt work, for an instance i thought it was ok, i benched 2m spi, but when i tried to do a mem write bench in everest , i got the "classic" BSOD.Thats it , im bored , 255 at 3.38 and nothng more :(, maybe my winchester suxx (0432) , but i dont intend to sell it and buy new -moreover i just wanted the 265-270 just for benches, i dont want to give more than 3.4 to my BH- for everyday
gravedigga: Congrats on getting bh-5 to work with your neo2. I might consider taking a trade for some of the bh-5 now. Just need to get a vmod or booster.
It seems that the OCZ and Kingstons make much of trouble on the Neo2, but the others works fine! :)
ahh ic.. i will have to ask which one he has. one question. what voltage u got on there. I was thyinking of doing a direct 3.3v rail mod if i get the bh5.
well that sucks.. I just found out that he has kingston!!! AHH. ohwell... have to wait for tccd.
Chip numb.
q41439,1 0409a2
s taiwan
Pac.NO:k0409905190
310fsb dual chanel adata 500 2.8volt;boot,win,süper pi1M and sisoft bandwith test ok.
Yeah, Kingston should be bad, but try it anyway! 3,35V is enough for 256MHz,
but for 266MHz i need 3,6V! :)
Adata 500 chips hynix D5 ;)
Nice one, have the same Northbridge! U use 2 x 512MB or 2 x 256MB?Quote:
Originally Posted by M.Yazıcıoğlu
2x512 Twinmos Mtec module;520mhz 2-2-2-5 voltmodded neo2(3.3volt)is stable :)
Mtec detail:04404 -50 TTD7608F8E600
2X512 :)Quote:
Originally Posted by GravediggA
I am going to be ordering this motherboard within a weeks time, where should I order fro to ensre I get the latest revision? I am in the USA.
Can't wait to pair this thing up with an OCZ Booster and some Geil Golden Dragon!
DevilsRejection
Got the Geil's yet?
tracking number says there coming tommorow! but i still have to order a processor :(Quote:
Originally Posted by IvanAndreevich
trust me by the end of next week i will make a thread with more pics and numbers then you can imagine. :toast:
edit: misread your post, im not going to use the geils nemore, but the new ocz vx. i want to sell my old system but too bad theres no forum here for people to sell/trade hw.
Finally, it works. 0439Korea with Gskill 1GBLE at 293Mhz-2.5-3-3-7/2.7V.
I picked up a new Neo2 couple of days ago specifically looking for S/N K0410xxxx or K0411xxxxxx, 0411xxxxxx are not available in Aus at the moment so i had to settle for K0410xxxxx.
Ive owned 2 Neo2s and both were K0409xxxxxx and chip stepping 0420A2 Korea.
The new one i got with S/N K0410xxxxxx the chip stepping is 0440A2 Taiwan, havent had much time to test it but looks good so far.
OCZ 3200 Plat rev2 stable at 250Mhz 2.5-3-3-7 1T 2.7vdimm in memtest and p95 :D
This is only the beggining :toast:
[QUOTE=Onepagebook]K8n Neo2 Chip: 0438A2 Made in Taiwan:
Date:NOV 2004 released, nothing new
Bios: 1.37 Moded
What kind of improvement?
well, as usual, I need to set vddr as 2.65 to run DDR570 2.5-3-3-7 to pass memtest std test
now, use only 2.5v
Onepagebook - what version was your older motherboard that this newer version gave better performance over?...
I've got a brand new 0410 here in it's box, do you think I should fit it or shop around for a 0411 board?...
My current board is a 0409, do you think it's worth swapping it out for the 0410 I've got here or to a 0411 which I could probably find if I looked??...
- Has anyone else on the thread actually updated their older board to a new board and seen an improvement?...
Cinders.
See my previous post, yes it made a huge difference for me in terms of stability.Quote:
Originally Posted by cinders
The S/N on my previous Neo2 was K0409xxxx and the chip stepping 0420A2 korea, new Neo2 S/N K0410xxxxx stepping 0440A2 Taiwan.
Onepagebook.. i got a question... what ram are you using on the picture you got them an 277mhz on 2-2-2-5 and where can i get them :D
I bought a 0410 neo2. It come with 1.3 bios and is bootable with winchester. I have a question, I just flashed the bios to 1.37mod and it showed version W7025NMS.13B7mod is that correct?
yes, it is correctQuote:
Originally Posted by MarilynMX