Why would you run BH-5 at 2-3-3 .... ?Quote:
Originally Posted by st0nedpenguin
Printable View
Why would you run BH-5 at 2-3-3 .... ?Quote:
Originally Posted by st0nedpenguin
Pfft, 12 hours to go, then it's timings time.Quote:
Originally Posted by trans am
I should just add, this RAM has never ran more than 200MHz stable in the year or so since I got it, in all honesty, I'm amazed it even posts...
12 hours to go? Dude it's stable!!! at this rate it's going to take you 1 year to get those at 2-2-2 1T and i'm guessing they crap out at 240mhz or so.Quote:
Originally Posted by st0nedpenguin
What amazes me is that after 3k posts on this forum, you still double post.Quote:
Originally Posted by st0nedpenguin
I am really confuse,
You guy said Sumsung 431, K4H560838F - TCCD is a new revision chip, how can this be, because i have a pair of corsair twinx cmx512 3200c2 ver4.1 about a month ago and it have the same chips on these module.
Quote:
Originally Posted by trans am
The point is that stock FX55 gets 32sec when the P$ 4.2ghz with 280fsb gets the same. What? You don't think 4.2ghz vs 2.6ghz makes P4 look like $:banana::banana::banana::banana:?
First of all I have a 3200+ 62w mobile. So I don't get where your getting your info that says I have a P4. Read my sig, it's pretty self explanatory. And why would you post something in here that has no relation to Mushkin memory or new TCCD? Get a clue.Quote:
Originally Posted by The Virus
i cant get these mushkins to run for :banana: :banana: :banana: :banana: in my neo2 :( spd setting are about the only speed they will run at. everything either results in no post or random reb00ts.
i've read a couple of reviews on this ram and it seems 250+ is difficult to reach even with loose timings.
http://www.gruntville.com/reviews/me..._pc3200ddr222/
It does actually, running 200fsb at 2-2-2-6 timings is way better then having ram running with crappy timings like 3-4-4 at 250-270fsb in real time performance.Quote:
Originally Posted by trans am
Quote:
Originally Posted by esoteradactyl
Is that BH5 your talking about??
Yeah, duh. but I test new products often and I don't run 3-4-4 timings on anything. Yeah I changed my BH5 just now so I could play with this new ram, but you still seem to miss the point. Could you please go away. Or would you like me to get a mod to do it. :)Quote:
Originally Posted by The Virus
I just read the review. This looks identical to how it's performing on my system. It's RMA time!Quote:
Originally Posted by Wingz
Yeah, im glad you agree with me. Why did you get rid of bh5 ram? They come alive above 3.3v.Quote:
Originally Posted by trans am
this is a TCCD thread isnt it ;)Quote:
Originally Posted by The Virus
OK virus if you're so smart. You run your ram at 2-2-2-5 as high as it will go. Someone with good tccd run it at 2.5-3-3-7 @280mhz+ and lets see who scores higher.Quote:
Originally Posted by The Virus
Now I know why your name is virus. Getting rid of you is like trying to get rid of HIV.
Quote:
Originally Posted by trans am
Dont believe everything you read in review sites . Almost every new ram that is reviewed OC's like sick but when its out for retail it bearly does default settings.
Oh no he didn't?!?! :eek: :lol: :ROTF: :rotf: :flame:Quote:
Now I know why your name is virus. Getting rid of you is like trying to get rid of HIV.
He maybe needs some of this.Quote:
Originally Posted by sparkie34
http://prozac.com/index.jsp
:D
(quotes from The Virus)Quote:
Originally Posted by The Virus
Your lucky man, I can't even do 217fsb on my FX55 and MSI NEO2, it boots but crashes when i try to run 2001mark. Maybe sata 3/4 are dont have pci lockage.
Kakaroto, what should the HT be set at for 12x217fsb?? This should give me exactly 2.6ghz which is stock speed for fx55. I got corsair pc3500c2 bh5 2x512 .
My experiance with FX55 and MSI neo2 is nothing but great performance since i got it 4 days ago. When comes to overclocking, I can't even run 210fsb with 2x512 pc3500c2 bh5 ram stable. Everytime i try to run 2001 3d mark it pauses then get a graphical glitch. I'm starting to assume this board doesnt even have its AGP locked. I know that its not my ram because i tested it with Memtest and passed even at 220fsb 2-2-2-6 timings. I'm extremelly dissapointed with this board. Everything stock runs Fine , try to oc even by 10fsb it freaks out, last time i crashed and rebooted thewindows reported an error coming from my 6800gt. AGP is probably running out of spec. Very dissapointed. Whats even more shocking to me is even at everything stock 13x200 , if i just raise my cpu voltage to say 1.55 or 1.6v and if i try to run 2001 mark it would freeze. Something is really wrong with this mobo when overclocked. Reading review sites i see they getting like 2.8-3.0ghz on Air and i can't even get 2.7ghz running. This plain sucks.
Quote:
Originally Posted by saaya
HEY! hahahah funny, i remember your first posts on xs, you said the a64 sucks in games compared to an athlonxp at the same clockspeed, linking to an hardocp article hehehe, do you remember?
hehe, im glad you found out the a64s are indeed very nice cpus
sweeeet rig you got there man! im glad you calmed down and stopped flaiming people and became a nice member of xs!
check out the neo2 tweaking guide in the amd section, theres a stick with many pages all about the neo2
(the virus)
I never said A64 sucks in games ,what i said was there was not that much of a difference in Doom3 maybe because its heavily video dependent. I always knew that A64 is king when comes to gaming. Plus , what happend in that thread really wasn't flamming, i was just stating my opinion.
Anyway, in bios i cant find the cpu/mem ratios like 1:1 , or am i that noobish that i cant find it.
I think your last question sums it up.
And your point is?? how is this in any way relevant to this threadQuote:
Originally Posted by trans am
Please keep this thread on track and about the main subject. If you guys want to flame each other do it in private. Consider this a warning.
No flaming here bud. Read all my posts, not a sign of flame, this guy is harrasing me and telling me that im HIV virus. Not very nice.Quote:
Originally Posted by Shroomalistic
What amazes me, is that after not posting for a few months, I find jumped up little forum nazis like you verbally abusing people left right and centre, you ran out of riddalin or something, sheesh?Quote:
Originally Posted by trans am
And Shroom, yeah this is a flame, but sorry man, this guy is a complete :banana::banana::banana::banana::banana:.
Ok, I admit I wasn't very nice to you but the Virus was a different story altogether. Talking about some Pentium 4 and making absolutley no sense in regards to the thread. I have zero tolerance for that. I appologize for being rude to everyone and I'm sorry to shroomalistic. This is an amazing forum and It's a privilege to be a part of this outstanding community. I was really pissed off about that Mushkin not working as expected. After waiting almost a week to get it, and it's pretty much DOA. so I was a bit flustered. Anyone that has had new computer parts not work knows the feeling and I hope you understand. I took it out on you guys and I am ashamed of my actions. Thanks. Lets keep it under control. Could a mod delete all the garbage from here so we can start fresh?Quote:
Originally Posted by st0nedpenguin
or maybe just keep future posts in this one since it's about high voltage TCCD:
http://www.xtremesystems.org/forums/...d=1#post587199
Meh, not a problem mate, I know the pains of dud hardware, the only option is to suck it up, deal with it, and sacrifice another sheep. :D