Very nicely done both of you. What voltages did you have set if you don't mind us asking?
Printable View
Very nicely done both of you. What voltages did you have set if you don't mind us asking?
Later at night i will post SS with configs :).Quote:
Originally Posted by hokiealumnus
Short test with i5-750 L934B467 air cooled (ac freezer xtreme)
http://www.abload.de/thumb/i5-750-4ghz-prime9o7v.png
Wow @ vcore.Quote:
Originally Posted by Chri$ch
How many have you gone thru to get that one?
You mentioned that batch in another post! Very nice... I'd like to find its brother!Quote:
Originally Posted by Chri$ch
oh dear!!! how come these i5"s take so much Vcore to get to 4ghz ? im currently running my i7 at 1.270 4.2ghz :shrug:Quote:
Originally Posted by Retro
wow!, really nice vcore but temps are to high.Quote:
Originally Posted by Chri$ch
my config setup is.
3.8ghz 21*181 @ 1.258v at load and temp's are 55 - 59° celsius degrees, at 20 - 26° ambient temp.
First revision of the CPUs, as well as the PCI-e controller is on the CPU for P55 chips.Quote:
Originally Posted by dan7777
Tool is right on. For my chip, it will do a stable 4.0GHz with only 1.3vcore. For 4.2GHz it needs a lot more, 1.44vcore.
Like Retro said, it's luck of the draw. Some people are getting really nice chips that do 4.2 to 4.4GHz, but seems like most fall between 3.6 and 4.0...
i am so confused right now i don't know what i want to build.. i was thinking amd 965c3 & gd70 but then started looking at these.. they are under 150 picked up.. or the 860 for 230 and a msi gd80.. i just don't know.. i wish i could get them all just to mess with.. the 920 is 199 but i think i want p55 not x58.. uhhhhh
Two more SS for you guys.
Sub 9 DONE!.
http://img692.imageshack.us/img692/1344/8985.png
http://img199.imageshack.us/img199/936/19922.png
Sub 20s DONE!.
Finally i got 1156 support and new NT-H1 Directly from Noctua!, thank guys for sending this.
Here in Chile i have the records for SPEED and times on Superpi and 3dmark frecuency. Cooming soon Dry ice and CFX 5770.
Regards from Chile.
Running it @ 3.6 with turbo on. Volts were left on auto, but CPU-Z was showing about 1.37V Ambients were around 22 C
15 min run
http://i621.photobucket.com/albums/t...me359/38ss.jpg
45 min run
http://i621.photobucket.com/albums/t.../3845minss.jpg
Both completed with no errors.
Edit: I keep forgetting to fix my BIOs clock, so ignore the dates. :)
http://img94.imageshack.us/img94/953...psvoltajes.png
Nice temps here, thanks to Noctua for sending NH-T1 and new mounting system for 1156 socket.
Hi guys
I have Asrock P55 Pro with bios 2.0 that come with add CPU Vcore over current protection.:cool:
I ran 19x200 with Orthos for 24 hours straight...but with stock cooler spike temp too high:down::shocked:
I am still looking for aftermarket cooler.:rolleyes:
http://i38.tinypic.com/24np9pg.jpg
I need to know which is better use cpu ratio 19, 20 or 21 with turbo?:confused:
I can't change anything above 22-24 with bios manual.:mad:
When I set all auto and I see there is 24x in Asrock OC tuner, odd :shrug: pix below.
http://i38.tinypic.com/ru5rlx.png
Anyway I did play around in bios setting below.
For 3.8 setting.
19x200 -3.8
20x190 - 3.8
21x180 - 3.8
For 4.0 setting.
19x210 - 4.0
20x200 - 4.0
21x190 - 4.0
I find 19x200 is stable for now even play games works fine, of course I will change to 20x200 with new aftermarket cooler.
Also I changed the Foxconn plate to LOTES plate myself link at http://www.hardforum.com/showthread.php?t=1465061:up: :up::clap:
pg
i hope i can get some numbers close to some of those.. i don't have any to post on a i5 yet but i am getting so close.. i need some ddr3, thinking about the trident 2x2gb 2000... i am looking at the evga p55 ftw cpu area and they have holes on it for 775 and also the i5.. does anybody know if i can i use my v2 with 775 pro mount on this board without any issues? i know i can find out by trying it but i am using it right now on my maximus se. one thing nice is i will be able to eliminate my nb loop off my cpu for this new board..
I think you can, but socket 1156 brackets seem to be making there way out now. I would just keep your eyes out for one so that you don't have to have the sink angled.Quote:
Originally Posted by loften
If one core is not stable after 4 hour prime 95 while other are, but are the chances that my I will get a bsod? Cuz from 1.35 to 1.39 the core is not stable. Here are my settings:
blk 200
multi 20
vcore 1.38
vram 1.65
ddr 3@1600 9-9-9-24
vtt 1.3
cpu pll 1.9
going to try auto
The chip needs more Vcore than what I would like, 1.36v, but at least it's Prime95 8+ hrs and LinX 20-run All memory stable.
If I drop the vcore even one step in voltage it fails LinX at some point.
http://i59.photobucket.com/albums/g3...B/1d92a9da.png
thanks,, i took a peak at it a little closer. i see what you mean by angle.. the holes for 775 are offset a little.Quote:
Originally Posted by millertime359
looks like about 25 bucks for a kit shipped if they have any in stock.. maybe i will have to try a custom one..
mine:D
L921C834
only with super pi 32mb pass
http://img202.imageshack.us/img202/3817/45ghzresize.jpg
What cooler?
forward progress..
i made aluminum back plate, 3 1/4 x 3 1/4 x 1/8 inch thick.. marked and drilled my corner holes, drilled 1/2 inch holes to clear the 3 lotes back plate screws. added plastic shim for extra security between metal.
checked for clearance on the soldered pins under the sides of the plate.. had to clear a few of the tips... got some screws and nylon washers and mounted it to my mobo. 2 nylon washers on each screw under the plate for corner spacers.
all that was needed for the fuzion v2 775 bracket was to remove the pro mount screws and file the corners of the bracket holes a tiny bit and it fits perfect.. i have about 1/4 inch gap for tightening between the mount and nuts/nylon washers under it..
i will have to put a big hole in my mobo tray for it to fit as the plate and screws are sticking out pretty far..
total cost including aluminum was more then the kit by a little but less then it with shipping and i don't have to wait.. now waiting for memory..
I got another chip in to test and this one looks a little more promising. I noticed that this one has lower VID of ~1.225v while my other chips seem closer to ~1.25v. This overclock is with vcore set to ~1.35v in BIOS "with out vdroop/LLC enabled" and the board overvolts to ~1.376v load.
http://i695.photobucket.com/albums/v...0ES4095Mhz.png