Printable View
got my ASUS M3A79-T Deluxe
put today put it all up today tried with auto out on AOD I got up to 2.9ghz which is nice, gona have to change it my self though, anyways how do I change my ram settings on this board the books a little vag on where the hell it is ? so I can change it to 1066mhz and adjust the timings.
I noticed this board runs a lot cooler too my MSI board as getting up to about 44C load. Now I'm barely getting to about 40C load @ 2.9ghz O_O
go to jumperfree configurationQuote:
Originally Posted by demonkevy666
set it to manual
then memory timing settings
u can only change everything if u set it to manual.
where ou select the OC to manual, you have 2 submenues for ram settings, in the second one the first option :P, and you`ll be able to set the speed that you wantQuote:
Originally Posted by demonkevy666
yes, I remember reading that somewhere, its pretty cool, it completes very quickly, and seems to be pretty good.Quote:
Originally Posted by informal
GO to Jumper free configQuote:
Originally Posted by EXxx
THen go to the 2nd ram configuration menu. Once there set it to manual, then set 2t mode to "enabled" and set it to 1066.
i swapped out my geil estoria's for some g-skill 1066 2x2 gig to see how they work.not to bad so far. i so want to get below 22 sec spi. so close but so far away. i cant seem to get 2600 nb at 3.5 ghz. i am sure that is what it is going to take to ge there.
superpi 22.375
http://www.hwbot.org/result.do?resultId=783328
^^ great run equinox, my best so far is this
http://www.hwbot.org/result.do?resultId=784810
i have a crucial stick that doesn`t boot under 2.3V, so i think i`m gonna torture IT this week-end :D, let`s see 2.5, maybe i`ll get some better super pi score than may last
Woot
Small Victory
I was able boot and run at 3.6 Ghz lasted long enough run SuperPi and get CPU validition
SuperPi 1M @ 21.762 secs
This time I took a screenshot
http://valid.x86-secret.com/show_oc.php?id=435762
After that I backed it down just a little bit to 3.570Ghz and was able to run 3DMark06 with Triple 4870's
3Dmark06 score=19709
We really need HTT 3.1
With three 4870's(PCIE2.0 x8), a CPU @3.57GHz and my NB and HTT 210x12(2520) all I could get was 19700
http://service.futuremark.com/compare?3dm06=8625915
hopefully this gets better with Deneb
http://i231.photobucket.com/albums/e...r/SPI36002.jpg
damn!!!! Mine booted right up at 4-4-4-12-20 2.2v.Quote:
Originally Posted by EXxx
deathstar, thats awesome bro. Why is your CPU score so low in 3dmark though? I was like five points under the 5k mark at 3.4 GHz. With my 9850, my 9950 at 3.4 GHz was only a few points off.
http://img377.imageshack.us/img377/8...izedwi9.th.jpghttp://img377.imageshack.us/images/thpix.gif
don`t get me wrong, the other 3 sticks i have are perfect :)), only this one is troublesome
amddeathsar, could you post you`re voltages?:D
just got that bad stick, freaking stick had to be the party pooper :p:Quote:
Originally Posted by EXxx
3.3 GHz using a bit higher FSB instead of upping the multi, higher ram clocks. Ram pretty good for 3.3 GHz
http://img388.imageshack.us/img388/4...6x16qa0.th.jpghttp://img388.imageshack.us/images/thpix.gif
The few reasons I can think of isQuote:
Originally Posted by Chicken Patty
One I had to switch from XP to Vista to run Trifire
second I ran a lower ref. clock this time 215 in XP, 210 in the Vista run
plus I had to drop my PCI-E speed from 119 from CF to 105 to run Trifire
(210*17, NBx12, HTTx12, PCIE@105, vcore1.55v NBvid1.3v, HTT1.28v, NB1.28v, SB1.28v, disabled ACC, Autoexpress, Microcode update and ganged mode,enabled CPUTweak(that's all I remember for now))Quote:
Originally Posted by EXxx
I had modded my water/ice cooling to get thru these runs
My temps were at 25c at those speeds
23.59 with 232 FSB and 50mhz less.Quote:
Originally Posted by Chicken Patty
http://www.hwbot.org/result.do?resultId=783247
23.43 at 3.3
http://img171.imageshack.us/img171/4...3300mhzqo5.jpg
Hey guys,
is this possible?
3.5G with 1,34 vcore and 260 fsb??:confused::confused::confused:
need more vcore
well I'm in vist64bit and have 9850 but I finally got 3.0ghz (3,010mhz 215x14)Quote:
Originally Posted by crazydiamond
takes me 1.5625 volts though idle here is high 47C but that's because AOD has the red circle on in the corner and when I turn it off it freezes up on me >_> after like 2 minutes.
little gaming I haven't seen no near 60C yet.
That chip would be SO golden you'd go blind instantly if you looked directly at it!:rofl:Quote:
Originally Posted by RASTAVIPER
Dont take this the wrong way, i'm only comparing as I could only imagine how good you would score if the score was right, but I used to score that in Vista at 3.15 GHz, i'll look for the screeny and see if I have and post it.Quote:
Originally Posted by AMDDeathstar
Here is a comparison with CPU and the same clock, everything identical, but one score is with all 4 cores enabled, and one is with only 2 cores enabled. Notice the difference in vCore also.
Runs in Super Pi
All Four Cores Enabled:
http://img503.imageshack.us/img503/6...5151oo6.th.jpghttp://img503.imageshack.us/images/thpix.gif
Only Two Cores Enabled:
http://img518.imageshack.us/img518/3...2781ei0.th.jpghttp://img518.imageshack.us/images/thpix.gif
Here is the same comparison as above in the Generic CPU bench. I didnt take a screen of the two core 3.4 GHz run so to show the difference in crunch time I put a 3.2 GHz run of the two core run. Still crunches quicker, but obviously scores a lot less.
All Four Cores:
http://img101.imageshack.us/img101/3...1021pi1.th.pnghttp://img101.imageshack.us/images/thpix.gif
Two Cores:
http://img116.imageshack.us/img116/2...1023vw0.th.pnghttp://img116.imageshack.us/images/thpix.gif
3.3 ghz with good temps? :)
Just raised the multi a little bit... more overclocking coming soon :D
http://i36.tinypic.com/ofyjp1.jpg