Project: Raistlin

Printable View

Show 100 post(s) from this thread on one page

10-13-2008, 08:08 AM
bianco

Quote:

Originally Posted by cccp22

good job

thank you cccp22
10-13-2008, 02:58 PM
Jor3lBR

1 Attachment(s)

Hey Bianco I need a measurement, if it's not a big deal for you can you tell me how many millimeters from side to side has the EK Mosfet Backplate you got?

If you don't have any access to the backplate anymore just give me like a ballpark.

Thanks! :up:
10-14-2008, 12:28 AM
bianco

Quote:

Originally Posted by Jor3lBR

Hey Bianco I need a measurement, if it's not a big deal for you can you tell me how many millimeters from side to side has the EK Mosfet Backplate you got?

If you don't have any access to the backplate anymore just give me like a ballpark.

Thanks! :up:

hi Jor3lBR, i knew that making a huge hole at the back of the mobo tray would be beneficial. haha. unfortunately, i cannot place the ruler/measuring tape really close to the back plates, but here are the ballpark figures:

it's roughly 9cm or 90mm in length and 1.6cm or 16mm in width.

hope that helps.
10-14-2008, 12:40 AM
bianco

update:

project postponed for the meantime.
last week, after an ultrasound the doctor found that my son was in the wrong position (top of the head pointing at the left side)and not conducive to normal delivery
she scheduled another checkup today to check if he is in the correct position, if he wasn't a c section would be needed
however, it turned out good in today's scan.
he has assumed the correct position (head pointing down) and there won't be a need for c section.
but to make sure we catch him in this favorable position, we will have to induce labor and deliver him out tomorrow.
i have taken leave from work for the rest of the week until my son and wife are out of the hospital
no work for the project planned for the moment
but who knows, maybe my wife will throw me out of the hospital room and banish me to pc casemod duty... (i wish.. haha.. kidding)!

:D
10-14-2008, 12:42 AM
emoners

congrats on the new kid! :up: hope you won't OC him too! :D
10-14-2008, 12:45 AM
bianco

Quote:

Originally Posted by emoners

congrats on the new kid! :up: hope you won't OC him too! :D

thanks pare!
hahah. no oc for these real babies. :D
i want to savor their youth... no hurry in making them grow up so fast.
10-14-2008, 04:47 AM
septim

38th to 40th week baby should be head down and positioned... if still early, some do the massage to position... and probably lessen the rock music to avoid baby dancing around...
10-14-2008, 07:35 AM
headala

bianco, congrats. i hope all is going well. savor every moment; seeing my first baby born was one of the most amazing things i've ever seen.

praying for a safe delivery,

Alan
10-14-2008, 02:12 PM
Jor3lBR

Quote:

Originally Posted by bianco

hi Jor3lBR, i knew that making a huge hole at the back of the mobo tray would be beneficial. haha. unfortunately, i cannot place the ruler/measuring tape really close to the back plates, but here are the ballpark figures:

it's roughly 9cm or 90mm in length and 1.6cm or 16mm in width.

hope that helps.

It did help! Thanks a lot. Don't worry about the updates just go get your kiddo delivered healthy! :up:

Good luck and Congrats!
10-15-2008, 10:04 AM
bianco

Quote:

Originally Posted by septim

38th to 40th week baby should be head down and positioned... if still early, some do the massage to position... and probably lessen the rock music to avoid baby dancing around...

thanks pare.
but the doctors here in singapore i think are conservative. they'd rather be on the safe side. which is fine by me.... c section is quite expensive.

Quote:

Originally Posted by headala

bianco, congrats. i hope all is going well. savor every moment; seeing my first baby born was one of the most amazing things i've ever seen.

praying for a safe delivery,

Alan

Quote:

Originally Posted by Jor3lBR

It did help! Thanks a lot. Don't worry about the updates just go get your kiddo delivered healthy! :up:

Good luck and Congrats!

delivered! my son was born october 15, 2008 at 1138am singapore time. he weighs 3.2kg and 49cm tall. i've gone metric and i am too lazy to convert to english system. haha. okok... maybe 7lbs and 1ft 9in tall. :D

first encounter with tygon
http://i253.photobucket.com/albums/h...esIMG_0840.jpg

my dad is boring... he doesn't even overclock... zzz
http://i253.photobucket.com/albums/h...IMG_0918-1.jpg
10-15-2008, 10:11 AM
BlueAqua

Congrats!! Perfect build!!

I think he's crying because no pt nuke was added to the water in the Tygon. ;)
10-15-2008, 10:31 AM
Dangals

Congrats Bianco :up:
10-15-2008, 10:38 AM
bianco

Quote:

Originally Posted by BlueAqua

Congrats!! Perfect build!!

I think he's crying because no pt nuke was added to the water in the Tygon. ;)

thanks BA.
haha. i think he's crying out for the bp rotary fittings...

yeah, and can you add the nb-sb waterblock for striker ii extreme... thanks!
http://i253.photobucket.com/albums/h...esIMG_0829.jpg
:D
10-15-2008, 10:40 AM
bianco

Quote:

Originally Posted by Dangals

Congrats Bianco :up:

thanks Dangals!
:)
nothing like xs early in the morning right mate?
haha
10-15-2008, 10:40 AM
2low4u

Yes Congratulations Bianco 10 little fingers & toes good to go! lol
10-15-2008, 10:44 AM
BlueAqua

Ha ha, maybe he's wishing his crib was make from Derlin, he doesn't want acrylic to break on him. ;)
10-15-2008, 10:45 AM
bianco

Quote:

Originally Posted by 2low4u

Yes Congratulations Bianco 10 little fingers & toes good to go! lol

thanks 2low4u
yup! good to go! :D
10-15-2008, 11:10 AM
bianco

Quote:

Originally Posted by BlueAqua

Ha ha, maybe he's wishing his crib was make from Derlin, he doesn't want acrylic to break on him. ;)

hahah. good one BA.
:up:

if my wife sees that i am relating my son's pictures to computers/watercooling... i will be in trouble. hahah. j/k
10-15-2008, 11:43 AM
dopestuff

congratz!! :clap: :clap:
10-15-2008, 11:48 AM
bianco

Quote:

Originally Posted by dopestuff

congratz!! :clap: :clap:

thanks dopestuff
:D
10-15-2008, 01:03 PM
Envy

awesome :surf: c o n g o r a t z beautiful baby boy
10-15-2008, 01:34 PM
bianco

Quote:

Originally Posted by Envy

awesome :surf: c o n g o r a t z beautiful baby boy

thanks Envy
:)
10-15-2008, 05:08 PM
Patriote

Congrats my man! Good looking boy :)
10-15-2008, 05:29 PM
Jor3lBR

It's A Boy!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!

Quote:

Originally Posted by bianco

delivered! my son was born october 15, 2008 at 1138am singapore time. he weighs 3.2kg and 49cm tall. i've gone metric and i am too lazy to convert to english system. haha. okok... maybe 7lbs and 1ft 9in tall. :D

first encounter with tygon
http://i253.photobucket.com/albums/h...esIMG_0840.jpg]

He's cute as my wife says :up: Cheers he seams sooooo healthy! I'll open a Guinness for your family here!
10-15-2008, 05:45 PM
HaCKs

*insert cliche water cooling joke here*

:toast:Congrats on the boy! :toast:

Now I feel bad, I was about to ask for more pictures of your computer, don't forget to start saving for college, this one's gonna be smart :yepp:

Show 100 post(s) from this thread on one page