yes they are rampage compatible :up:
Printable View
yes they are rampage compatible :up:
Thanks bud. I thought since it was an intel chipset it would be a little different....Quote:
Originally Posted by evil-98
Even the Southbridge block would be the same?
Hence, I would have the same clearance problem as you if I decided to water cool the graphics card as well correct?
no heres what you would need to completely WC a rampage
NB - http://www.petrastechshop.com/eksnowaa.html
SB - http://www.petrastechshop.com/ekaschwaa1.html
MOSFET - http://www.petrastechshop.com/ekasmowaa4.html
heres a compatibility list, this should have all the info you need
http://site.petrastechshop.com/other...patibility.pdf
Love the look of your setup. Doing an awesome job!
Exactly what I was going to ask for next. You are the best. Good luck with your project! :up:Quote:
Originally Posted by evil-98
that's the setup i got !Quote:
Originally Posted by evil-98
small update:
got most of the basic design of my rad grill done, turns
out swiftech's dimensions are really wrong, one thing
i did forget to measure is the length and width of the rad
so if thats wrong too, then its back to the drawing board.
literally.. well needed to test the meanwell, so i decided
to do some modding to that as well. simple, effective. now
all that is left is a power switch and a relay. then it should
be ready to go. right now, whats really holding me back is
the top mounted rad. so the sooner i can get this radgrill
made, the better.
radgrill pics in a few
http://evil98.insanity-asylum.com/co...ecker2/132.jpg
Oh cool. Would you mind if I Pm'd you and inquired more about your setup and what results you are getting?Quote:
Originally Posted by bigslappy
Wow, Petrashop is really running low on those EK blocks. Most of their chipset/mosfet/cpu/gpu blocks by EK are out of stock. How long before you think they get more? :)
Oh evil you're extreme, putting the d5 down to 24v... we'll see how it works;)
The only think that its a little worst than hole system is the upper radgrill, i think it will look better if you can do some mesh like the original silverstone one, but for 3x120, it'll look so elegant;) because now the radgrill its cutting the line of the tj07... (sorry for my english..)
Well evil very good worklog and pics!
PD: did you recived the d60?
Bst regards!
Could you post your measurements of the MCR...I was planning an upgrade for my other machine, and was using the published rad dimensions from swiftech.Quote:
Originally Posted by evil-98
Thanks in advance evil!
Looking good evil, can't wait for the next update!
Speaking of measurements, did you ever get those case top dimensions?;)Quote:
Originally Posted by skinnee
wow those led's on the waterblocks look sssiiiccckkk!!!! im going to do that for sures!!!!!
more like up to 24v :ROTF: but yes, alittle extreme :up: but thats what weQuote:
Originally Posted by SaNxU
do around here right :rolleyes:
anyways, still working on the design, trying not to coincide with the TJ07s
native design too much and dont want to kill flow. so i may end up going
with the original rad grill design or something completely drastic well just
have to see
sure, i wish i had like 2 hours to spare, i havent had enough time to get allQuote:
Originally Posted by skinnee
the dimensions down but enough to work with.
@everyone else:
thanks guys, the project is moving, and theres nothing stopping me but
time :shakes: and sleep! but who needs that right...:rolleyes:
cheers
heres a version of my grill with inspiration from charles_h and his murderbox
big +ups to charles :clap: now my version is obviously a bit fatter for air flow
which makes it loose its elegance.. :shakes: this is one of the many different
designs ive done, just havent posted. this one i just rendered really quickly
just to show you guys. dont worry about the front, its just a mock up, just
wanted to see how it would look.
still need to check the dimensions of the rad grill again, to makes sure that
it fits, as of now everything fits perfectly, with my rad grill it lifts the rad
5mm giving me enough space to clear the mobo and etc. still need to cut
the mobo tray, and might need to change a few things but would make
things much more enjoyable.
cheers
http://evil98.insanity-asylum.com/co...ecker2/133.jpg
edit
heres another version, i let it render longer so its cleaner
http://evil98.insanity-asylum.com/co...ecker2/134.jpg
cheers
I think that the first its a little bit better than the second, but iI qould prefer to do more holes, and smaller cuts, it will rocks;)
And the 5 1/4 bays do you think to make some think too?
Best regards and congrats for your mod!
I like the traditional style here on this case - maybe you could mock up with the grill slats running downwards parrelel to the case sides - would be different - would'nt know if it would work mind ?
i like the second one :)
I`m too!!Quote:
Originally Posted by disruptfam
Its more....simple...more restrained!
yea i think the second one is a more conservative choose
but that doesnt make it a bad one!
also
I GOT MY D60!!! turns out amazon sucks at updating progress
on orders, but there estimates were right on the money!! woot
it came a day early too!!
im snapping away as we speak!
yay for D60
I still deciding between the d80 and d60Quote:
Originally Posted by evil-98
lets see some pics :)
i like the second grill the most too:D
the first one has a nice concept behind it but it does need shorter cuts indeed
heres a few pics i took, dont be too hard on me! but my firstQuote:
Originally Posted by disruptfam
impression of the camera was that i was very small and light
compared to the d80 which i have used, ive also used a d70s
which was similar. what i do like the most is the little noise in
night shoots. i take all my shots in raw, given i have a 16gb
SD and pics came out on the warm side so i do use some post
work to cool it down. so far i like it alot :up: the i havent had
much time to play with it yesterday and probably wont have
alot of time to play with it untill sunday, but so far its 2 :up::up:
http://evil98.insanity-asylum.com/co...ecker2/135.jpg
http://evil98.insanity-asylum.com/co...ecker2/136.jpg
http://evil98.insanity-asylum.com/co...ecker2/137.jpg
http://evil98.insanity-asylum.com/co...ecker2/138.jpg
http://evil98.insanity-asylum.com/co...ecker2/139.jpg
http://evil98.insanity-asylum.com/co...ecker2/140.jpg
http://evil98.insanity-asylum.com/co...ecker2/141.jpg
http://evil98.insanity-asylum.com/co...ecker2/142.jpg
http://evil98.insanity-asylum.com/co...ecker2/143.jpg
cheers
nice pics! :)
Can't wait to get mine.See what i can do with it.
What lens on those pics?
i didn't realize i missed the update.
i'm really enjoying this thread. keep up the good work evil!
looking good mate :up:
lol @ "dont be too hard on me"... I wish I could take shots as good as yours
is that all one loop with a single DDC? im down to <1 GPM with cpu, nb & mosfets alone