10m 59.485 @ 3995.1
http://img150.imageshack.us/img150/1...3995ku8.th.png
Hard to challenge 3oh6 with sub-500 FSB ... i think :D
Printable View
10m 59.485 @ 3995.1
http://img150.imageshack.us/img150/1...3995ku8.th.png
Hard to challenge 3oh6 with sub-500 FSB ... i think :D
any and all action is more than welcome :up:
i am just doing some 1000MHz+ CL7 32m testing right now so expect some fun updates here hopefully...and in the Ballistix PC3-16000 OC Report ;)
thanks but your right, high FSB plays a large role int he performance...some chipsets more than others too. i know one that loves FSB and high memory clocks in 32M :D
every time i come back to this thread i have to spend some time on a clock and since i was just working with this Ballistix kit at 1000MHz 7-6-5, i figured i would test it against some other setups...the results were good :up:
E8400 (Q808A476) 7 x 566 (boot at 566*7)
Chilly1 Single Stage (tired and in need of tuning/recharge)
EVGA 790i SLI Ultra (P04)
Swiftech MCW30/PA 120.2/DD5 // P5B-Dlx SB (SPP // MCP cooling)
Ballistix 2x1GB PC3-16000 CL9
Biostar 7600GS
Seagate 7200.9 80GB SATA2 (10GB partition for OS/SPi)
ERAM v2.11 (transfer CW file to & page file)
Silverstone Zues ST56ZF 560W
WinXP Pro SP2 (custom nLite'nd job)
realtime / core 1
maxmem = 630
copywazza = 1GB (folders with 1MB file in each) from C:\ > Z:\ > C:\ > Z:\
visual effects all off
memory usage = "System cache"
processor scheduling = "Programs"
page file = 300MB/300MB Z:
plenty of services disabled but not all
3961.8MHz SPi 32M = 10m 59.016s
click for full size including memset...
http://img.photobucket.com/albums/v2...1_1006-1sm.png
vdimm? That's looking awesome. :up:
Very nice 3oh6:eek:
So many Divisors on that 790i, must be nice!
Great result, 3oh6 :up: Very efficient!
Here's my best shot so far.
14m57s375 @ 2992.5
P5K SE FTW! :rolleyes: :D
http://lh3.ggpht.com/d.hopero/SETVZQ....reely.bmp.jpg
Hey mates,
here is my best run
http://img263.imageshack.us/img263/1...m4s4ghzwh7.jpg
I think it is very efficient for QX, ASUS P5E64 WS Evolution is a great board and realy fast!
Only thing what suxx is the Mem Dividers, so with 1:2 is 900 MHz the best what I can get.
Time Zone: 17.xx Update
Proc Speed: 2392.2 MHz
Actual Time: 17.58.657s
Multiplier: 6 x 398
Ram Type: DDR2
Ram Speed: 956 mhz
Ram Timings: 4-5-5-13
Divider: 5:6
Processor: Intel Core 2 Duo E8400
Chipset Used: P35
CPUZ Validation : http://valid.x86-secret.com
http://img263.imageshack.us/img263/8...392ghzlmr2.png
Just Tripping! ;)
Pinoy Powah! :D
Time Zone: 18.xx Update
Proc Speed: 2250.7 MHz
Actual Time: 18.59.109s
Multiplier: 6 x 375
Ram Type: DDR2
Ram Speed: 900 mhz
Ram Timings: 4-4-5-13
Divider: 5:6
Processor: Intel Core 2 Duo E8400
Chipset Used: P35
CPUZ Validation : http://valid.x86-secret.com
Full Screen :
http://img511.imageshack.us/img511/3...250ghzlqr6.png
Just Tripping! ;)
Pinoy Powah! :D
cant wait for you to have ddr3 fafs!
12m59.891 @ 3279.7
http://img384.imageshack.us/img384/4...3279jm2.th.png
Always so close to 3oh6 ... i definitly need another chipset to challenge you !
some updates by me & pmp.
e8500 + pmp's d9gtr + p5e3 premium
10.xx
http://img58.imageshack.us/img58/883...6109rp8.th.png
11.xx
http://img501.imageshack.us/img501/2...8938vv4.th.png
i've tried to challenge 3oh6 at sub10 category, but it's really hard with such low FSB and RAM. impossible? :rolleyes:
http://img501.imageshack.us/img501/9...1766ap7.th.png
sub13 isn't possible because 6,5 multi doesn't work. 7 multi = low fsb...
don't know why my loops after 13-15 are much slower than any other lowclock challengers there :confused:
monteboy's tweaker works fine, but i need more runs to test better performance settings.
hot damn, nice work guys. the P5E3-Premium is such a monster at 500FSB, it really is a shame i am having no luck at all with mine. i don't think i will be able to touch those with the 790i unless i find time in my tweaks because the hardware is absolutely maxed at this point. i will do an update in the next couple of days. i have a little bit more on my plate i need to clean off before i start having fun again ;)
Very nice score sobih25
PL6 is hard....I take with PL7 12'09''
Is north at air? Vnorth?
Thx
http://img68.imageshack.us/img68/616...5866oc3.th.jpg
aircooled ofc, just used noisy delta fans. vnb 1,69v-1,72v from bios. that's all.
you guys are doing really great
so bloody fast :up:
that RAM you have is amazing
If you use the SpiTweaker please show it on your Screenshots that all other people can see which Waza settings are used.
I build a smaller GUI Version , check this -> http://www.xtremesystems.org/forums/...&postcount=379
used 600mb 1024kb files.
i tried to use this spi tweaker and it's a bit weird
when i look at my system available memory it's maxed out but cached memory size is at a bare minimum :confused:
i've tried with and without CDT and also with smaller file size
but it doesn't look right and at same settings monte is on for 11m run i'm a few seconds slower
http://img128.imageshack.us/img128/6361/79582715vb4.jpg
@Dinos22
If you want balance mem & cache try larger Waza. 1840 MB & 1024KB filesize
+ CDT. For me the balanced system was not the best choice. I have better results with smaller Waza & sngle file size.
Try Dino different Parameters , there are many factors that affect Spi32M time. Such Partition Size , MaxMem , pagefile size & location.
Parameters which are good for my systen should not always be the best for others.
I've not check any balance between total/available ever.
daaaaaaaaaaaaaaamn
i just did a flat 12m time at 3627MHz lol
i'm too tired for this now lol
gotta hit the bed hehehe
i will try to do some Pmem tweaks to beat hipro5 in sub12m category :up:
http://img393.imageshack.us/img393/9...63at362po5.png