mnemonick - Thanks for that info! BTW - Nice rig.
Printable View
mnemonick - Thanks for that info! BTW - Nice rig.
Can someone post an everest score of 1800mhz and 7-6-6-15 for comparison purposes I am wondering if im missing a tweak somewhere which is slowing me down. Memset shot would be great too.Quote:
Originally Posted by sdumper
Thanks!
thanks for the tips.. i am getting ready to paint the inside for more of a blackout effect.
So what did you cool with that 120.2, aI am thinking of putting a 120.3 in there and only having the on/off and a cd/dvd but i am not sure of my coooling needs, i think i will have to run 2 seperate loops, since i am cooling a maximux extreme, fusion block, cpu and various gpu's.
:D I think I can break 10min 32M soon with this board:
http://img138.imageshack.us/img138/9...1ghz32myi2.jpg
:up:
Just an observation but I am finding I can post higher with the 333 strap and my QX9650 than with the 400 strap.
http://img26.picoodle.com/img/img26/...em_d7b7379.jpg
i have too joined the ranks of ME owners and i must say, it wasn't pretty earlier this afternoon. i grabbed the board last night and didn't get a chance to power it up until this morning and for the better part of the day, i was pulling what hair i have left out. coming over from a P5K3-Dlx, which was at the time coming from a P5B-Dlx/P5N32-E SLI, i was not to pleased with how much hassle and how picky this board has been voltage wise.
the P5K3-Dlx was priming at 550FSB within minutes after powering up for the first time. this ME monster was a whole different story. in the end, i have made a ton of progress and managed to get something reasonable out of it so far. this screenshot certainly was not going to happen on the P5K3-Dlx. single 32M, yes, but dual 32M would crap out around 960MHz give or take. Saaya was right...X38 seems to handle high clocks a little better:
click for full size including Memset and voltages...
http://img.photobucket.com/albums/v2...dual32m-1s.png
still haven't messed with timings or anything like that. just happy to finally get a dual 32M ran at 1000MHz and on the 266 strap even. still not having as much luck with PL level at 450+ FSB having to use 7 but hopefully once i get a better feel with the board i can get PL6 at 450FSB+.
i am still not ready to give this board the praise that Camoflage is giving it but after a day, it seems to have some decent potential. i just wish i had a P5E3-Dlx to compare it with as comparing the X38 to P35 of the P5K3-Dlx isn't a fair fight ;)
and to finish off my first night with this fattie, a shot of the setup:
http://img.photobucket.com/albums/v2...st_night-1.jpg
:D MAXIMUS EXTREME rulez - now gettin' closer to the 32M-10min-barrier:
http://img214.imageshack.us/img214/3540/45ghz32mmg1.jpg
Happy holiday to all ppl here around........................;)
:up:
still need to do some work because i am not pleased with this yet...
[img=http://img02.picoodle.com/img/img02/5/12/24/t_firsttrym_6ed80a7.jpg]
http://img02.picoodle.com/img/img02/...ym_6ed80a7.jpg
Shouldnt my score be lower at 5ghz and 1820 7-7-7-14 1t or am I mistaken?
[img=http://img34.picoodle.com/img/img34/5/12/24/t_32mm_47ab60c.jpg]
i would think so with a 45nm. keep in mind though that 32M is all about the OS tweaks and 30-45+ seconds can be had from completely un-tweaked to a fully tweaked setup.Quote:
Originally Posted by sdumper
with my exceptionally tweaked, balls out sub 5GHz run on 65nm only a second behind you at a higher frequency, i would say you either have something strange going on or some windows tweaking to do. of course mine is at a higher FSB which really helps too but i would still think a decent 45nm setup should crush a highly optomized 65nm run at similar CPU/RAM frequencies.
are you using any form of copy wazza for your run?Quote:
Originally Posted by 3oh6
is LargeSystemCache enabled?
those two alone are worth a solid 20+ seconds on some setups.
Nope whats copy wazza and how do i enable large cache?
LargeSystemCache:Quote:
Originally Posted by sdumper
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Session Manager\Memory Management]
"LargeSystemCache"=dword:00000001
and just do a search for copy wazza, there are numerous different methods but no distinctive tutorial. i did up a screencast that incorporates copy wazza and ERAM a while back but it isn't the best method anymore in my opinion. it is worth about 8-9 seconds though in 32M:
http://3oh6.com/forum_posted/ocx/jas...pywazza-1.html
HTH and lowers your times a bit for ya :up:
Thanks ill try after christmas :)
Hi.. i wonder if i can ask for your advice.. im a relative noob at oc'ing ram (cpu no problem). i've a similar rig to you but have had problems getting my ram running at anywhere near full speed... please can you post up your memset sceenshots (or bios settings?) so i can compare mine and try and identify the problem?
many thanks,
-- Jez
asus maximus extreme (x38 mobo). intel qx9650: fsb 450. cpu multiplier 8.5 ddr3 cellshock 2x1gb, 1800mhz 8.7.6.21. nvidia 8800gtx. gigabyte 3d mercury case, with watercooling of cpu, nb, and gfx card (3 loops off one rad, two s-flex fans swapped for the stock gigabyte noisy ones).
Quote:
Originally Posted by eternal_fantasy
Seems to help some but not as much as i expected....Quote:
Originally Posted by 3oh6
[img=http://img32.picoodle.com/img/img32/5/12/25/t_501632m7771m_56132ce.jpg]
Quote:
Originally Posted by jowi69
First off amazing OC :clap: and secondly I am :mad: that I require a ton more volts to get that high.
Also what temp was that run on Im hoping thats a lot colder than a normal SS :p:. My cascade should be ready shortly and ill see what it can do at less than -100c... http://www.blazingpc.com/forum/showt...ex.html?t=6625
But more importantly for the purposes of the SuperPi discussion I am surprised that your score is not lower.
I ordered one of these today :D
27114 *Bundle(3)ASUS Maximus Extreme LGA775 X38 ATX DDR3 2PCI-E16 2PCI-E1 2PCI 2GBLAN 1394A SATA RAID Mo 1 $359.99 $359.99
26640 *Bundle(3)Corsair XMS3 Dominator TWIN3X2048-1800C7DFIN DDR3 2X1GB 2GB DDR3-1800 CL 7-7-7-20 XMP Me 1 $599.99 $599.99
27086 *Bundle(3)Intel Core 2 Extreme QX9650 Quad Core Processor LGA775 Yorkfield 3.0GHZ 1333FSB 12MB 45N 1 $920.00 $920.00
That's the combo I got, So you guys would suggest replacing the thermal paste before even using it huh?
how hard is it do take the heat sink off to do that? I'm not new to doing this, but on a board with this kind of heat sink, and most I ever paid for a MB makes me a little nervous :p:
not hard to clean up paste but yes its needed look at these picts...
http://www.blazingpc.com/forum/showp...95&postcount=2
lapped...
http://www.blazingpc.com/forum/showp...96&postcount=3
Thanks, that's perfect, nice guide :)Quote:
Originally Posted by sdumper
now just going to pace a hole in my carpet waiting for delivery ;)
i had pretty decent contact on the northbridge with the stock paste but the southbridge and crosslink were pretty poor, but weren't really hot so it doesn't really effect much. i really should have taken pics while doing it. i take photos of everything else, not sure why i didn't doing this.
either way, after applying AS5 on the northbridge, temps seem to be a little better but nothing spectacular. one big tip though...acetone eats that stock thermal pad like nothing. definitely worth picking some up to save a big hassle.
post someone good voltage settings for fsb around 500MHz! I cannot to vreak 470MHz ... THANKS!
Yes some voltage settings or bios shot would do wounders :D
Also I cant get AI Suite v1.03.15 to work.
it crashes every time, am I the only one ?
:shocked: : http://www.xtremesystems.org/forums/...d.php?t=169055Quote:
Originally Posted by Nosfer@tu
:up: :up: :up: