Yes the packaging is quite sexy.
Printable View
Yes the packaging is quite sexy.
I take it from your response, that the Enzo doesn't cool that well.:hm: I'm betting you have a NDA, so I'll not push further (I think you've told me enough already ;) ).Quote:
Originally Posted by nikhsub1
Who is this guy. Pops in out of no where to tell us about this block he got and doesn't even indicate where he purchased it from - oooooh your precious block of brass - what is this, a gold bar stolen from a bank in Italy? Are you related to Al Pacino??:spam: :gay: :horse: :with: :wierd: :cord: :argue:Quote:
Originally Posted by Dexther
No, I'm not related to any VIP :D.Quote:
Originally Posted by Think
I didn't name the shop in public beacause, in the forums in which I usually write, that's forbidden :).
However, is a little shop in Italy and I don't think could be useful to you anyway :)
You can name any shop here. Which you might notice after just a little bit, as most of us love to pimp Petra's Tech Shop. :D :D
www.liquidmachine.itQuote:
Originally Posted by [XC] DragonOrta
But currently they're out of stock..... And yes, one is on my hand.....
Just to make you a bit grudge.... :ROTF:
WOW.. havent seen such a flame post in a while. Wondering if IMFU is going to edit that out.Quote:
Originally Posted by Think
1. Some sites dont allow posting of store names. And whats wrong with keeping it a secret? Ive kept the IWAKI wholesaler whom i got my RD-30 from secret. Very few people know which wholesaler i went though. Theres nothing wrong with keeping vendors quiet. He was nice enough to say he would PM the vendor to anyone who was interested. I dont see why your going off on him.
And I also stopped telling people the wholesaler of IWAKI was once petras and jt had them in stock. The price difference isnt very large incase of those wondering. There not making very much off the pumps each. If you want even more info, i saved ALEX and the Community by introducing him to the cheaper vendor then the one he was originally going to go with.
2. Even if they had it in stock, and he left the name included, and he did mention it was italy, Would you have bought one? If you wouldnt, then why does the store name even apply to you?
3. Im sure IMFU has a really big sign on this forum that says please respect other members. You really should be nicer to people expecially if there new. He was nice enough to take pictures and show us the packaging. Thats a lot more then what you've done for this thread. Please stop Trolling. Your last few posts showed your a troll more then a contributor.
Anyhow, let us know how the block works out. The more first hand commentary people have the product only the better.
Anyhow, Dexther, incase no one welcomed you to XS Forums. :welcome:, pull up a chair, and join us in chats. Think went off awefully rude, there would of been nicer ways to say this.
No I only have 1 run of it so far - so I can't say and there is no NDA... I just don't have enough info yet.Quote:
Originally Posted by Waterlogged
nikhsub1, do you have the new rev.1 block yet, or are you using the older one with the thick base?
I never tested the first thick base one... I have the revised edition - barbs fit in this one too... seems they fixed that as well :DQuote:
Originally Posted by Linus@ncix
lol the first one the barbs didn't fit? :lol2:Quote:
Originally Posted by nikhsub1
The barbs that came with the block did fit, but other G1/4" barbs did not :confused:Quote:
Originally Posted by SparkyJJO
Sounds like somebody goofedQuote:
Originally Posted by nikhsub1
Ooooo, no NDA? http://smilies.vidahost.com/cwm/cwm/eek6.gif ...COOL!Quote:
Originally Posted by nikhsub1
I'm sure I speak for a few interested in this block when I say, GET A MOVE ON :cord: :lol2:
We want test results!!:bounce: :bounce: :bounce: :bounce: Please?:ROTF:
bring out the hand taps...
eagerly awaiting some sort of results....
hahaha i was faster than you :rofl: ... i was the first in italy :ROTF:Quote:
Originally Posted by vkbms
p.s.
ciao alessą :D
A review here.
Hope you like it.... altough it's in italian..... ;)
Nice review, tnx for the link ;)
So it is the best one ... a comparation with Fuzion could have been better , but :shrug: ...
The only one negative note (by the reviewer) is the lack of innovation because this enzotech seems only to improve the Fuzion project in technic and appearance : by me, not at all a negative aspect! :D
I would be nice for the non Italian speaking members if someone could translate that review into English and maybe post it on this board as well for interested members.
Nice results.. My attempt to read the graphs tell me the SCW-1 isn't too restrictive, matching the Fuzion flow restriction. It seems to beat the Apogee GTX so I expect it to at least match the Fuzion and the Apogee GTX with a more accurate test bench, which is good.Quote:
Originally Posted by Shadowtester
Try with this:
http://www.google.com/translate?u=ht...&hl=en&ie=UTF8
Maybe you can understand ....if you can't understand something just PM me.... ;)
My guess is that the GTX they test is NOT BOWED but flat... bowed the GTX would stomp the Enzo.Quote:
Originally Posted by Xilikon
I was about to ask that actually. Can someone who reads Italian verify if that APOGEE GTX is bowed or not?
Not Bowed.....Quote:
Originally Posted by Linus@ncix
3 Different mounting to test the contact.....
When i open the waterblock to mount the bigger oring two threads of the base just went off.....
http://img248.imageshack.us/img248/2...0755zw2.th.jpg
http://img248.imageshack.us/img248/9...0756jt8.th.jpg
http://img248.imageshack.us/img248/7...0764os1.th.jpg
http://img218.imageshack.us/img218/6...0770wo1.th.jpg
:down:
so? not realistic performance number :(