My E6850 1.45v out of the box first try is @ 4GB,just testing with ORTHOS.
Printable View
My E6850 1.45v out of the box first try is @ 4GB,just testing with ORTHOS.
My retail E6750,
http://www.xtremesystems.org/forums/...postcount=1207
4Ghz (4GB?) Orthos on water...looking forward to your results!Quote:
Originally Posted by clone38
Quote:
Originally Posted by MacClipper
MacClipper what memory are you using with this ?
Hey where did you get your chip from? I can't find them in the UK.Quote:
Originally Posted by clone38
BTW nice chip :)
Want one chip to in europe =)
Decided to spin off and list the specs here to keep this thread clean and for E6850s,Quote:
Originally Posted by IBSGuy
http://www.xtremesystems.org/forums/...d.php?t=151571
coretemp inaccuracies aside, the temp on the chip (6850) must be cool because i notice very little by way of warmth when touching the tuniq's copper base during orthos....so suffice to say it runs cool.
my old 6700 b1 wood heat up considerably to the touch....ctemps@ idle @20c about 42c@3.4 & the heat would radiate :hehe:
Yes but thats whats so weird. Using RMClock i´ve seen my E6850 start to throttle when it reaches 82° on the cores.
A bit higher, and the system resets. And thats just with 1.50-1.55 vcore. I cant run orthos or TAT because ot the heat.
System is stable for everything else, playing games, watching hdtv movies.
Would be normal if i actually would reach 82°, but when i put my finger on my heatsink, it is totally cool, not even really warm.
yep cant get any heat from my heatsink :hehe: :shrug:
running orthos now at 424x9...@ 1.39/1.35v droop
3.8 piece of piss :cool:
Anyone with a E6x50 G0 CPU on a P5B Deluxe ?
My reatail E6850 is at home ... will test it soon ...
I have kinda given up on reaching 4ghz on air with my E6850.
Redone the thermal paste and the whole airflow yesterday, now my temps are ok.
~30° idle, ~65° under orthos load, with ambient temp ~27°.
But i cant get higher than 3.52ghz with 1.5v vCore, and get orthos to run stable.
So i see the reason i cant go any higher on the FSB more in the vCore than the temps.
If i go any higher on the voltage, the system still boots, and i can run superpi and
play games, but its not orthos stable, getting an error after just a few seconds.
I guess my personal E6850 isnt one of those who like higher vCore much then,
but i am still very happy with it. Even at stock it performs very good. I love it :)
Will leave it 24/7 on 3.40 ghz with only 1.35v now, with speedstep etc enabled. More than good enough for me.
E6850ES L710XXXX
Asus P5K Deluxe
2*1GB OCZ PC9200 1.150 Mhz 5-5-5-15
8800GTX
1000 Watt Enermax Galaxy DXX
Bigtyphoon + FM121
http://img373.imageshack.us/img373/949/4200hr4.jpg
http://img165.imageshack.us/img165/9416/1m4155pp2.jpg
3.800mhz Orthos vc=1.53
http://img177.imageshack.us/img177/5277/orthos38jg6.jpg
E6850ES L710XXXX
Asus P5K Deluxe
2*1GB OCZ PC9200 1.150 Mhz 5-5-5-15
8800GTX
1000 Watt Enermax Galaxy DXX
Bigtyphoon + FM121
4.100 Mhz 32m
http://img388.imageshack.us/img388/7651/32m41mx3.jpg
wow asefik, your temps are really good for haivng such a high vcore. will that be ok to run 24/7 with such a high vcore?
What can you guys get at default voltage?
1.53 is high. I wouldnt go any higher then 1.5 for 24.7 use.
3.600 Mhz 24/7 vcore=1.40 this is ok?
http://img338.imageshack.us/img338/4653/orthos36rl6.jpg
1.4V should be fine for 24/7 use.
i can run 485x7 at "default" - which with my mobo/bios is 1.33/1.3v droop asus probe.
3.6 and up needs more v.
why is your temps higher @ a lower vcore
...actually default on this mobo is about 1.24v in bios... which gets me to about 3.2/3.33
i set 1.425 for 1.33 in probe for a "low" vcore.
bios temp for 1.5v idle is 35C
bios temp for 1.33v idle is .....29C @20c ambient.
i havent really tested the limits of this chip; and i never will either...:lol:
@kimandsally.....Dude you're cat looks just exactly like my cat Marshall ...wow!