i have a problem with my p5w dh
i cant set vcore there is only auto.
cpu is a E6600 Retail.
pleas i need help
Printable View
i have a problem with my p5w dh
i cant set vcore there is only auto.
cpu is a E6600 Retail.
pleas i need help
this problem has come up many times.
it happened to me once, but it went away somehow.
try taking out your cmos battery and wait for 1 minute.
put it back in, power it up and hope that you have more options.
if this doesn't help, do a search. there have been a lot of methods listed.
You need to turn off C1E & Speedstep in the BIOS; it's under the CPU Configuration Page.Quote:
Originally Posted by DEVIL_DK
Anyone tips so I can get around mij 435MHz FSB Wall without vmods ?
disable hyperpath 3
increase vmch for sure
Didn't helpQuote:
Originally Posted by m0da
what??
well then here are more basic steps:
increase vdimm, vcore, and vfsb as well.
make sure your memory can handle the frequency and timings with the given voltage.
Damn, i don`t know what`s going on?!?! I cant get fsb over 422. My e6300 is primestable @ 7x422. 7x424 it boots up, but if i start prime, superpi etc, it will crash. With chipset i have done the same as the freecableguy at the beginning of the thread + i have volcano12 fan blowing to the heatsink. The temperaturi is at 1,65v ~39-40 in idle...
Reallynice and simple mods:
http://vr-zone.com/?i=3876&s=1
Any1 can report haw it works ?
I`ll give it a try when my mobo returns.
What pencil to use?...just "write" all the resistor? lolQuote:
Originally Posted by Zulusman
You can use any pencil but a 2B and HB pencil is good i thinkQuote:
Originally Posted by Prelim
wow.. that very simple mods..
anyone can confirm its working? :D
i dont wanna blow my P5w
Hi guys,
i have a problem. my dh has the bios 504, now i got a 6600 stp6 b2 and it doesn´t start. i try to hotflash because i got no other chip here but allways afudos tells me "bios file size doesn´t match the existing bios size"
i don´t know whats wrong ...
is there any command in afudos to erease the bios first completly? or is there any other possibility?
thanks
Hi where can we get the 801 modded bios? there is a guy on OCAU that has it and it lets you raise the Vmch upto 1.85v through bios.
Never heard there is a modded 801 bios ?and VMCH1.85V ...?
AFAIK there is only hardmod for ur board to use VMCH over 1.65V.
I would call Asus up and ask them to send you a new BIOS, just complain some and you shouldnt have to pay anythingQuote:
Originally Posted by Mr.President
have you tried /pbnc /n ?Quote:
Originally Posted by ruler22
email chainbolt and he will send it to you via email...actually i was hoping someone here would host it, by all reports it is modified by Asus to allow mch at 1.85v. I dare say in a short while Asus will release an improved bios which also includes the 1.85v mch option.Quote:
Originally Posted by gotheb1ues
Quote:
Originally Posted by lawrywild
what does that mean?
Quote:
Originally Posted by Crankybugga
Who is brainlessbolt? Not registered here.
On the pencil mod, it says something about lowering the resistance in steps... makes no sense, how would that happen in steps if you drew the line as shown?
Graphite conducts electricity. The more graphite the more electrcity conducted, thus the resistance is lowered. In other words, the thicker and heavier the the layer of graphite the LESS resistance.Quote:
Originally Posted by GoldenTiger
Send me a link to the file.. ill be more than happy to host it. Ive been hosting a lot of beta bios for gigabyte and msi so far.
I´m interested about this modded bios...
heh, ill be more than happy to dl it (from you of course :D)Quote:
Originally Posted by Haltech
1.85 sounds niiice
Quote:
Originally Posted by ruler22
I just called them: "There is no possibility to send a new chip ......"