Air-cooled E6600 at 4054MHz

See first post.;) I was using 0078.

I had a particularly good board. It did 450+ FSB with stock multiplier and 470 with lower multiplier. No voltage mods. Unfortunately I killed the board after I switched to sub-zero cooling. I should have just stuck to air.

hmm that's weird.


I cant even get past 400 without it looping and looping on a 9x and then I have to clear the CMOS.


Im kinda stumped...

Can you do 400+ with a lower multiplier? Maybe you need to increase NB voltage a little.

With an average air cooling(temp less than 43'C @ 100% stock speed CPU load), what is safe VCore limit for OC-ing an E6400?

OK heres what im running stock a 6 stepping core 2 duo e6600, I want to overclock this but do not what programme to use.


http://img512.imageshack.us/my.php?i...ntitledtx8.jpg

http://h10010.www1.hp.com/wwpc/uk/en...-12726884.html

Here the specs m7680 model

Quote:

---

Originally Posted by OMEGA3

Hi Sierra-san

I bought E6700ES Stepping5 on last week,for the verification.

It's not bad.
P5W DH
Vcore1.426V 3836.2MHz
Vcore1.500V 3955.6MHz
Can be run pi1M, by air cooling(Cooler is 鎌鉾Z).

But,can't be change the multiplier on BIOS Ver.0701 when E6700 Stepping5.
Also Intel Bad Axe...
Therefore now using the CrystalCPUID and MSR Editor.
The verification of the memory etc. is also troublesome. :D

---

Great chip u have there...i just bought one of these; haven't got it yet - if it's anywhere near yours in performance i'd be ova the mooon.

thinking of getting a ninja cooler (or some other monstrous hunk of metal)...but i'll wait to see voltage / heat stuff under my lil xp120

Quote:

---

Originally Posted by lewiscosworth

http://h10010.www1.hp.com/wwpc/uk/en...-12726884.html

Here the specs m7680 model

---

You can't overclock with an HP bios. You probably need a new board, if you need to know how to overclock, you probably shouldn't do it.