Printable View
He Missko, thanks.Quote:
Originally Posted by Misko
This week I will try to bench at 3.6ghz 8x450@2:3.
I do not know if the mems can manage 675MHZ @ 32M Superpi.
Perhaps at a higher Vmem.
But this week(end) I will try to get the max. for sub 14 and sub 13.
Great I'm waiting to see that run, expecting great scores :toast: (see if u can use 1066 strap also)Quote:
Originally Posted by Oldscarface
Nowhere to put this pic but here.
Oldscarface:clap: ....you got some magic ram man:D
lets see some nice things :D
today i just tried to get #1 among HellasOCTeam members,
C2D X6800
TeamXtreme 1200HC5 @ 2.71V
ASUS Commando Vdroop Vcore modded
Seventeam 1000W PSU (<-Godlike)
DDR Maximizer
2 stage r410/r1150 Cascade Cooling (ofcourse by me)
i think i can get sub10min @ 5080-5100, not that much tweaked run...
tomorrow ill try for max, + hit some other low clock challenges :D
http://img454.imageshack.us/img454/8880/9585135cn1.jpg
Very nice. :) Now try losing a multi. :p:
http://www.xtremesystems.org/forums/...d.php?t=132933
it's just faster RAM in that case...... :) mighty nice times from Victor and esdeeQuote:
Originally Posted by Gautam
yea nice run esdee :) not to mention nice chip and nice cascade! :D
8x400 PB5-E / GeIL PC2-8500 C5
He Misko,Quote:
Originally Posted by Misko
I do not think my mems can handle 675MHz @ 2,5 volt.
I had tried this last weekend, but I had some serious problems with my system. To realize this the mem voltage must be much higher, but up till now I do not want to give much more than 2,5 Volt.
This week I will try it again. ;)
Abit QuadGT bios b08 Vmch@1.86v
e6600@1.625v@TT BT & "cold" air +7°C
2x1Gb Cricial Ballistix PC6400 @2.7v
silverstone st56f
11.xxx@4056Mhz
http://img228.imageshack.us/img228/9...047spn3.th.png
13.xxx@3598Mhz@1.5v
http://img187.imageshack.us/img187/5...t016uf7.th.png
PB5-E / GeIL PC2-8500 C5 / CPU Stock Cooler
14.xx @ 3190.4 & 13.xx @ 3474.3
16.XX category
http://img475.imageshack.us/img475/4...9mhzcaswz7.jpg
got some monster RAM coming in a few weeks + looking for a B2 so that i can give you suckers a run for your money finally :D
15min 37.640 sec
E4300 @ 3353Mhz Ram - 4gig (2x1 OCZ Gold and 2x1 Buffalo Firestix) @ 496Mhz
CPU: E6600 @ 401*9 (3609 MHz)
RAM: G.Skill 8500 @ 501.2 MHz 4-4-4-4 4:5
TIME: 13m 31.234s
screenshot: http://loppmarknader.se/quadgt/1331_4444_45div.JPG
Updated.....I wrote a rather lengthy post here but was told to refresh and log in again. So I lost everything I wrote. Basically I need to remove the bottom eight entries from the 13.XX and the bottom three from the 11.XX. It should be obvious and need no explaining. Save a screen of your place in the list as I'm wanting to do this Sunday morn. Damn I'm a little torqued.
Got to try to move up.
i finally have had some time to get my 32M on back with the P5B-Dlx but unfortunately my memory doesn't want to play with the big boys at the 600MHz+ range 4-4-4. i might make it do so later and get something decent for the 12m xx.xxx section. for now, just a little sub 15m action:
14m 59.094 @ 3159.9MHz // 592.5MHz 4-4-4-4
click for full size with memory timings...
http://img.photobucket.com/albums/v2...592_4444sm.png
wow your memory is very nice what vdimm
they are decent but they really don't want to run 600MHz 4-4-4-4 at all. the above run was done with 2.6v.Quote:
Originally Posted by dinos22
Ever tried increasing tRAS and tRFC?
yeah, you can see the full results thread from this kit in my signature. dual 32M at 600MHz was good to go at 4-4-4-8-5-35-10-10-10-10 with 2.6v, but that just isn't fast enough to keep up with those freak sticks of esdee :)Quote:
Originally Posted by Gautam
You're telling me. :-/ Made it up to 4-4-4-8 with tRFC 25 myself...actually don't believe I've ever tried tRAS 4 for 32M. Is the difference significant?
reallyQuote:
Originally Posted by 3oh6
Try 4-4-4-12 sometimes it gives you another 4-5MHz out of the RAM
you try more vdimm
thats the key...i need to stop being a sandra and put the boots to these sticks. i like to stop at that 2.6v mark but i guess i will go north of that soon.Quote:
Originally Posted by dinos22
on the topic of the 32M challenge, Coop, you really have to start linking the posts to the times in the list. that way it will be easy to see exactly how a time was achieved...like in the sub 4GHz thread. just an idea, and if you want a hand, i can scower through the existing times with a list of links for ya.
good idea :toast:Quote:
Originally Posted by 3oh6
13.xx
http://666kb.com/i/anbf534wcyjf3dcom.jpg
Damn B1 CPU.. :(
"on the topic of the 32M challenge, Coop, you really have to start linking the posts to the times in the list. that way it will be easy to see exactly how a time was achieved...like in the sub 4GHz thread. just an idea, and if you want a hand, i can scower through the existing times with a list of links for ya."
I know. I spoke to that in my last post..the one that got lost due to having to re-login. That thread is real nice. I will see what I need to do and get started. Once I get going it shouldn't be a big deal. The times have improved alot. I thought about adding something besides speed and time to the list. Any suggestions?
And 3oh6, what a good run on the 14.XX.
yeah at 3.6GHz B1 ain't moving much from this sort of time for me either :(Quote:
Originally Posted by funkflix
http://img300.imageshack.us/img300/3...2m13m38eh7.jpg
thanks mate...and thanks for keeping this thread up this whole time. **edit** just saw that you already linked most of the times...damn nice, thanks **end edit**Quote:
Originally Posted by coop
as for additions to the listings...perhaps memory frequency and the basic timings so we can see in one screen what makes the times so damn fast.
got a B2 boys so will be able to improve times (fingers crossed the Corsair PC10000 kits arrives soon too :D)Quote:
Originally Posted by dinos22
Quote:
Originally Posted by dinos22
Thanks 3oh6. I was thinking mem freq. also and date it was done. Some by bachus were done a long time ago and are still up towards the top. I'll work on it some more. There is ample room.
@dinos, I got a chip too. After several recently I got a 6700, a 627B, with a vid of 1.2375v. :D (thats what my face was doing when I booted up the first time)
I've had little time so far but I've been using 1.393v and primed for 50 min last night @3700. Probably won't make a big difference on my times but will be able to use alot less vcore.
oh God that is a nice CPU.....get me one of those PRONTO :DQuote:
Originally Posted by coop
The magic 627B :rocker: :slobber: :eleph:
I got most of the Intel done(linked). If someone sees a mistake or can provide a link to one of the unfinished ones, pm me.
nice manQuote:
Originally Posted by coop
my 16.X time has a mistake there....you have an extra dot in there lol
first post here:)
http://img178.imageshack.us/img178/9431/32m36002wy8.jpg
hey dude the idea is to get the lowest CPU MHz and reach JUST under a full minute markQuote:
Originally Posted by over@locker886
so if you raise your CPU/RAM clocks a little you will shave off the 14 seconds there to get into 12.XX category....the lower the CPU MHz the better :toast:
nice tweaking there man :)
i know it's a little OT but i'm getting closer and closer :banana:
http://img340.imageshack.us/img340/8...4432msubl5.jpg
bugger
got to give it another shot tomorrow :slapass:
http://img337.imageshack.us/img337/8...544432mru4.jpg
been using the swiftech kit :) works well i think
HARD MOUNT >>> YEAH BABY :D
http://img201.imageshack.us/img201/1...1111111tm1.jpg
http://img442.imageshack.us/img442/1...3333333oq0.jpg
12.XX CATEGORY
http://img409.imageshack.us/img409/2...544432mjm5.jpg
Bet your happy that's been licked mate ;)
i would like to see that time at 3.6GHz :DQuote:
Originally Posted by Johnny Bravo
we'll see what PC10000 Dominators can do soon :) :D
Well done dinos.
Nice job:DQuote:
Originally Posted by dinos22
thanks guys....:toast: it was really painful having all those B1 CPUs i tell ya lol
Nice job:DQuote:
Originally Posted by dinos22
13m 15.453
for first time...
Welcome sammuri. This thread is somewhat different as you need to get in under the minute mark with a fairly low, (very low) clock speed. Try to get more efficient. Look at some of the times on the first page.
Ok...Quote:
Originally Posted by coop
few mhz for one category
12.xxx
more faster...
those are some pretty crazy times Midnight, but not really in tune with what this thread is all about.Quote:
Originally Posted by MidnightMadness
i happen to be working on my 15.xx time and you are going to spank me where you are at with that time, but what you want to do is lower your frequency until you are getting results right at 15.59.xxx. the goal is to run within the time slot at the lowest frequency and you have plenty of MHz to drop to get in under 16 minutes. i look forward to your result thought as it should be pretty stonch.
Yes people, ditto what 3oh6 said and just like what moonman did. Good time though on the 13.xx midnight.
i just got an Abit QuadGT so i figured that the 32M low clock would be the best place to do some testing to get to know the board. one big problem is that it ate my Super Talent PC8000 C4s i think. i was playing around with only 2.4v VDIMM and after trying to push what i could boot at on the 800 strap the memory started acting funny...sure enough, both sticks are all but dead :(
so it is back to the Team Group 6400 C3s. i am still learning the board and how far i can push memory but came up with a pretty decent time for the 15.xx.xxx section so i thought i would throw it up here. abit guru shows semi-accurate voltages for everything but VDIMM...it's actually set to 2.35v in the BIOS.
15m 59.688 @ 2922MHz // 487MHz 4-4-4-5 // Abit QuadGT
click for full size with memory timings...
http://img.photobucket.com/albums/v2...487_4445sm.png
i think you should add MUST [SEE FIRST PAGE BEFORE POSTING RESULTS] in thread title and use RED BOLT in the first post to explain what results we are looking for :toast:Quote:
Originally Posted by coop
@ 3oh6, to bad about your mems. Do you think it was freak/board specific or does 800 cause more of a demand or load? I have abit but have found 800 to be difficult to get anything decent with.
@ dinos, done. Probably would have been helpful if I would have done that some time ago.
coop you will have to ask a mod to change the thread title
as it didn't change even though you made the corrections.....
and while you're at it
put the rules up the top of the thread and make them
THIS SIZE IN CAPITAL, RED, BOLT, SIZE 4 :)
and a disclaimer that we will send someone to shoot them down if they post disobeying the rules j/k :D
Just a hint coop, if you use the fixedsys font, every character is the same width, so you can line things up perfectly. ;) Not a big deal just throwing that out there in case you get bored.
Thanks Gautam. I'm learning. I will get that fixed as I wanted it to look better myself. Just didn't know how. I'll tell you about being bored. Last night I babysat my comp. while I did a 8hr Prime. I had to monitor CoreTemp. and add ice to my cooler/res. I'm doing another right now at 4020. I hope it can complete. 1.544v We are having perfect weather now (cold spell) in Phx. for doing this.
good one didn't realise that :)Quote:
Originally Posted by Gautam
:D :D :D :D :D :D :D :D :D :D :D :D :D :D :D :D :D :D :D :D :slobber:
http://img157.imageshack.us/img157/7...utkittiao5.jpg
:banana: :banana: :banana: :banana: :banana: :banana: :banana: :banana: :banana: :banana: :banana: :banana: :woot:
Sorry ;) This is correct ;)
11.xxx
http://i84.imagethrust.com/t/1030658/32m.jpg
Your nothing more than a rotten exhibitionist Dinos and I hate you :p: :slobber: :D
i'm gonna get a restraining order i think :p: :DQuote:
Originally Posted by alpha0ne
:woot: That is a nice collection there Dinos .. now with lots of options
Finally I had some time for benching.
This is my best score for Sub15 min, it seems that I have some room for improvement, but I'am already happy with the result.
Later on I wil try for sub14 and sub13.
System :
Asus Commando
Core 2 Duo E6600 @ 3120 Mhz (8 x 390 Mhz, 1,53 Volt bios)
2x1GB Crucial Ballistix PC8000 @ 585 4-4-4-4-5 (2,5 Volt bios)
Everything is air cooled (cold air)
ok...for now it is a work in progress. I'll try later.
One for 15.xxx category
2925Mhz
http://fileshosts.com/intel/Asus/P5B...5m57s719ms.png
very nice George :D
oh sooooooooooooooo close grrrrrrrrrrrrrrrrr
3600MHz CPU
600MHz RAM 4-4-4-4 2.4v
13m 03.109s
gotta sleep on it i think :wth: :yawn2: :yawn2:
http://img248.imageshack.us/img248/8...4432msuts0.jpg
Nice one:toast: What did you use kits? PC-10000?Quote:
Originally Posted by dinos22
16:59.281s, Allendale as usual ;), 394x7=2758MHz, 4:5, 492.5 4-4-4-4
http://img400.imageshack.us/img400/1...2758mhzkg7.jpg
BTW, @coop: in 14.xx category there is JMKE and should be JMKS, please fix it :).
:D yeah need to do a testing report soon with all the ram i received :toast:Quote:
Originally Posted by over@locker886
Still with my trusty Gskill 6400 HZ D9GMH 629 batch managed new personal best 32M times for low clock challenge @3600mhz (beat old PB by 3 seconds!) and 3176mhz (sub 15min mark) :)
Both done at 2.50v vdimm via Hipro Maximizer :D
http://fileshosts.com/intel/Asus/P5B...3m23s094ms.png
http://fileshosts.com/intel/Asus/P5B...4m58s719ms.png
Fresh windows install with nothing installed except Super Pi v1.5 (all my previous benchies have full suite of apps installed futuremark apps/.net framework etc etc).
for 12.XX CATEGORY
Abit Quad GT , Crucial Value Sticks (D9GMH :D) , voltmoded & watercooling
http://img405.imageshack.us/img405/4571/525x7zd9.gif
Board setup: :)
http://img355.imageshack.us/img355/7748/ab92id8.jpg
Fabulous looking board there monteboy. Excellent time too. eva, you beat crotale by .2mhz.
I challenged 12.xxx category.
YOROSHIKU-ONEGAISHIMASU. m(_ _)m
http://homepage2.nifty.com/NewBeetle...8s875_359G.png
Whoa, alot have been after that. That's harsh. Nice job and welcome.
Nice NewBeetle how much vdimm ?
man you destroyed our times with that :)
Nice job:) Push +1 fsb and you can near kingpin's result.:rolleyes:Quote:
Originally Posted by NewBeetle
Thank you very much, coop-san.Quote:
Originally Posted by coop
and sorry i had change my result.
Please correct it.
Hello, eva-san.Quote:
Originally Posted by eva2000
Vdimm:2.67V
Hello, over@locker886-san.Quote:
Originally Posted by over@locker886
I tried it.
Look this picture.
http://homepage2.nifty.com/NewBeetle...56s953_36G.png
DEWA DEWA ～
Great:toast:Quote:
Originally Posted by NewBeetle
I wait DFI, because Abit have very poor memory controller, 600 cl4 impossible in Abit now.
I think Ive given you guys ( especially you NewBeatle ) enough of a head start.... I think its time I show my entry.....
Every tweak known to man has been used in this run..... The OS is XP based but highly modified ( thanks to a special friend in Redmond ;) ) to make Superpi 32M run very efficient, in 1m its not as effective..... I didnt show Memset but just believe me when I say its very tight:cool: .....
http://www3.telus.net/luis99/zzz32m.JPG
Working on some more tweaks ( theres prolly still a couple out there that I dont know ) and with Dice next week, I should break 12m30s if everything goes as planned.........
:worship:Quote:
Originally Posted by NewBeetle
Edit: 3590x12:58=2796239 :eek:
Quote:
Originally Posted by Gautam
:nono: 3600x12.56 :p: :clap:
NewBeetle :
Respect man :clap:
That is a serious nice time you got there.
At this moment I'am also benchen for sub13.
^Uh shouldn't it be 12.98125 * 3590.
I actually did (12*60+58.875)*3590.1, unit comes out to be MHz*seconds.
very nice NewBeatle-san :clap:
@ luihed, 4 20 is tomorrow.
@ Newbeetle, done.
2981.7.....coop.....15.58.734.....7x426.....426mhz .....3-3-3-4.....1/1
This is unbelieveable that you are posting here at XS now Newbeetle :worship: :worship:Quote:
Originally Posted by NewBeetle
Even crazier that we have just about the worlds greatest PI bencher IMO ever posting in this low clock thread now.
I'm humbled by your results and methods as always :D
here's one for 12.xx category
E6700 L629B079 @3900Mhz - 10x390FSB
Asus P5B Deluxe 1101 bios
2:3
2GB OCZ PC2-8000 Titanium Alpha VX2 @585Mhz 4-4-4-4
http://fileshosts.com/intel/Asus/P5B...2m18s718ms.png
What do u think about this one, mobo is Abit quadGT, and mem was at 514mhz which is funny compared to 600+ when using 2:3 divider, win xpsp2:
http://img215.imageshack.us/img215/2892/cetvrtinb6.jpg
Yep, it looks like ~500 1:1 1066 is pretty much even with 400 2:3.
Very nice time. :toast:
fast run :toast:
I see it like synchro fsb<>ram is very very fast (ok strap 1066 also helps but not to much, it is more important in 1M), I think 550 synchronous is equal with ~600 2:3, also this is on xp sp2 maybe it is possible to go under 13min with 2k3, this one is also without any ramdisk applications, we tried (this result is done by my OC Team) ERAM but results was worse. I will try to tweak it more these days.Quote:
Originally Posted by Gautam
Hello, over@locker886-san, luihed-san, Gautam-san, Enoc-san, Stapler-san, dinos22-san, coop-san, eva2000-san, Misko-san,
and thank you for your comments.
Thank you so much Oldscarface-san.Quote:
Originally Posted by Oldscarface
Your bench is very fast.
I'm waiting for your result.
Thank you very much k|ngp|n-san.Quote:
Originally Posted by k|ngp|n
I am so pleased to see comments from the worlds greatest OC Legend.
And I respect you who keep updating the world record in both pie and 3D benchmarks. :worship: :worship:
Now, i challenged another category 13.xxx
But the chip is 1-core & L2=1M CPU.
Please ignore this result if it is not suitable for the outline of this thread.
http://homepage2.nifty.com/NewBeetle..._CL3474mhz.png
it seems 1M-Conroe 3.5-4.0% slower than 4M-Conroe at "modPI 32M Bench".
DEWA DEWA ～ (it means "best regards" in Japan)