Printable View
Something strange is going on.
As long as my LAN connection is disabled i can run Prime95/OCCT without end at 3GHz 1.45V no problem.
But as soon as i enable LAN connection Prime or OCCT will fail within minutes.
WTF? :confused:
Temps are ok < 47C load.
Do you try with diffrent drivers?
Pushed my 148 just a little bit more:-
3456MHz @ 1.65v SPi 32m Stable
CPUZ verification
I'm a bit skeptical as to whether I'll hit 3.5GHz 32m Stable, but it won't be for lack of trying.
Great results there NISCO :toast:
You got a great chip there HermS. This should put to rest the naysayers that a fx57 is so much better. These numbers are what the average fx57 gets on single phase, I was waiting for some vapor numbers, thanks.Quote:
Originally Posted by HermS
I'll bet you were on a real high last night. :woot:
21m SPI....f.uck me dead :toast:
Thanks Dogsx2, :toast:Quote:
Originally Posted by dogsx2
Since my really really bad FX-55 clawhammer there was no way in hell I was gonna spend silly money on a chip again, that dog of a chip nearly put me off oc'ing for life.
When I saw that thread by PRTeamJapan I knew I'd found my next cpu. To get results like this from a relatively cheap chip has really put the spring back in my step! It's great to see that pretty much everyone with these Optys is really happy with them, so often in the past we get all the hype about a new stepping/model and then results for the masses like us don't quite live up to expectations.
And yeah last night my heart was thumpin' like mad..... It still is! :woot:
Link for the 50 first Opteron 144 CABGE 0536 VPAW stable overclocking : http://home.scarlet.be/~pascpiet/DV/...36VPAW_50.html
This is like the old days in oc'ing, not about how much money you could spend, but about taking a low end cpu and getting something for free.
Thanks AMD, you may not have knowing done it but you put some excitement in single core oc'ing. :woot:
I really feel bad for you. I know you were trying to help us out by getting some 144 & 146 oertons and they send you a night and day difference batch. :( You are an honest man posting the results before you sell them all, and that says alot about you.
Looks like it ran okay. :) I can see this CPU in a quiet/cool rig.Quote:
Originally Posted by gundamit
http://img155.imageshack.us/img155/9181/28059ok.png
[QUOTE=gundamit]Looks like it ran okay. :) I can see this CPU in a quiet/cool rig.
Put that bugger on phase now that you gave it the gentle, low volt treatment.
Hi,Quote:
Originally Posted by dogsx2
Thanks you :toast:
I'm honnest that's right, but the 50 first are already pay and ship :)
It's not nice for man who want 3 - 3.1 GHz in WC :( but for the price ... it's good or very good :)
However, I hope receive better stepping in the next delivery (Week of 17 October).
:toast:
Scheduled for tommorow if I don't hit any snags. :DQuote:
Originally Posted by dogsx2
omfg that :banana::banana::banana::banana:? ther is no hope to get 3 ghz with iced water? i hoped for 3 ghz 24/7 :(Quote:
Originally Posted by computersmsa
Hmmmm...what's the voltage scaling like? Are you and the others able to get, say 2.7GHz stable at much lower voltages?Quote:
Originally Posted by computersmsa
Start at the beginning of the thread and read. By your ?? one can tell you haven't done your reading.Quote:
Originally Posted by AgentVX
Just got mine In from the mailman a few minues ago. Vandi special CABNE 0530APMW :D just like the other 146's from him.
Popped it in at 2800 @ 1.4v and priming away.
Will post some screens when I get anywhere with it. :banana: :banana:
lucky guy you are :banana:Quote:
Originally Posted by fullup3
post the results when you have please
btw batch nº of the opteron?
Dropped the volts a bit. Not sure which Prime torture test is best for burn-in, so I guess I'll just run all three. Lol. :p:
http://img350.imageshack.us/img350/5...eprimes1ge.png
Quote:
Originally Posted by Zeus
Have u tried a PCI nic?
Got my 146 CABNE 0530APMW. Im running Value Ram right now, stock heatsink, stock volts, 100 divider, and It booted first try @ 2.9ghz @ 1.39volts and primes perfect :banana:
FYI, I've been following the development of these S939 Opterons since OC Detective posted about them at ocforums.com. I'm directing my question at computersmsa because, correct me if I'm wrong, his entire batch is a different stepping from the rest of you guys :fact: (or most of you guys anyway)Quote:
Originally Posted by dogsx2
Don't you find it odd that most of the results here are 2.9-3.1GHz on 1.4-1.55V and those in his link are 2.8-2.9 at much higher voltages? :rolleyes:
i was about to ask thatQuote:
Originally Posted by dnottis
but on a related note, my dfi's onboard lan died.. both of them. confused, i reinstalled windows. still no luck. tried a pci nic.. still wouldn't connect to anything. popped in an msi k8n neo, works just fine. any ideas? :D
angentVX, he was simply unlucky in getting a newer batch with CABGE cores. there is nothing more to the matter. he is a good guy, don't out your suspiscions on him ;)
AgentVX ->
http://home.scarlet.be/~pascpiet/DV/...W_MS@1.49V.pngCode:Opteron 144 CABGE 0536 VPAW
DFI nF4 Ultra-D 704-2BTA
Puit Cooling -> Full = ~ 35°C
Max Stable -> 2729 MHz @ 1.49V
http://home.scarlet.be/~pascpiet/DV/...W_MS@1.57V.pngCode:Opteron 144 CABGE 0536 VPAW
DFI nF4 Ultra-D 704-2BTA
Puit Cooling -> Full = ~ 36°C
Max Stable -> 2808 MHz @ 1.57V
http://home.scarlet.be/~pascpiet/DV/...W_MS@1.65V.pngCode:Opteron 144 CABGE 0536 VPAW
DFI nF4 Ultra-D 704-2BTA
Puit Cooling -> Full = ~ 38°C
Max Stable -> 2862 MHz @ 1.65V
For me ...I have ship them Thursday, We must wait for more result :)
Edit : ozzimark http://www.bel-hardware.be/forum/img/smilies/jap.gif
I've got nothing against him! Geez, stop misaligning me :p:Quote:
Originally Posted by ozzimark
I'm just curious if it's a scenario where they're giving a lot more volts for the last few MHz. Thanks very much for the info, computersmsa.
No i haven't, might try that this week, thanks.Quote:
Originally Posted by dnottis
Ordered my 148 from eWiz yesterday and it shipped same day! :banana:
Need to get a mobo for it though, and maybe some ram....intel switch. Hope its a good stepping...
I'm still waiting (Impatiently I might add) for my Vandi'Special to arrive in the mail. Today might be my lucky day!
with x800gt week for great marks resoults :(
http://img260.imageshack.us/img260/4...23marks2vh.jpg
http://img302.imageshack.us/img302/3...41marks1xj.jpg
THE BEST I CAN DO UNTIL NOW :toast: :banana: :clap: suicide shot of course :( :eek:
http://img148.imageshack.us/img148/2...8578mhz7fh.jpg
Lord have mercy! Impressive stuff :toast:
What bios are you using NISCO? My 9:10 divider is not working right, I wonder if another bios would help.
my bios is 623-3
Thanks I'll give it a try. :)
Nice Overclocks Nisco PT.I am still waiting for zhe cool night to start testing my 146 CABNE0530APMW.Just to reach a little bit more than 3+Gig with Aircooling at Stockcore or little bit more.
what are the good weeks for opterons 146???
Opteron 146 CABNE 0530APMW Air Cooled by XP90 with very high temps! :p:
3GHz 1M
http://img16.imageshack.us/img16/8664/3ghz1m18vt.th.png
3GHz 32M
http://img16.imageshack.us/img16/825...32m14bl.th.png
week 30 seems good
Nice Clocks Meatfrog what kind of cooling?Quote:
Originally Posted by TheMeatFrog
Heres mine at Aircooling. Whats your Batch? Mine is G50 072
http://img133.imageshack.us/img133/4...ustomff.th.jpg
his cooling is xp-90 c = aircooling
Oh the better One. The Copper XP. Had never thought that i would need a better cooler. But i will need. Thx Gothr3k.
My cooling is just the regular XP90, and this heatsink has seen it's better days. :p: I have a Zalman CNPS9500 on the way along with some G.Skill FF to go along with my new chip. :) I'm be so limited by temps right now it's not even funny :mad: so the IHS will probably be coming off shortly after I get my new heatsink. :D
Batch # is 0053Quote:
Originally Posted by Rufus7
Your clocks aren't too bad either ;)
What is your load temp? Is that your idle temp in ss?Quote:
Originally Posted by TheMeatFrog
Meatfrog the IHS off will not bring so much.At HWLXX in the Thread its not always getting better from the Temps. Its an CABNE an FX Stepping they are a little bit hotter then other Steppings. But they are stable even at Aircooling. Need a good Watercooling to get stable over 3xxxMhz at Stockcore may be more or less the 1,36Vc.But 10K will bring me much more Mhz stable.Sorry for my English but i´m from germany.Quote:
Originally Posted by TheMeatFrog
Yes that was my idle temp in the screen shot :stick: the highest temp I saw under load was 55 a few times but it was mostly 52-53 :slap:Quote:
Originally Posted by dogsx2
My highest were around 47°C under Load Prime Custom at 3Gig. And Idle were 36°C at 3 Gig.You can see it in my Screenie. Your Batch is lower then mine Meatfrog. Grats.Now i have 2,8Gig by 1,232Vc Prime is working for 3Hours by 41°C Load temp.
Is your IHS on or off?
My IHS is allways ON!!!
Never taken IHS OFF at any CPU.
That was last night at 18°C Roomtemperature.
Tonight its getting little bit colder trying for more.
http://img143.imageshack.us/img143/6...stomfft.th.jpg
Now that this thing is stickied, maybee we should change it from the "unofficial" to the "official" opteron overclocking thread...
18C room temp...wow!Quote:
Originally Posted by Rufus7
My room temp... :p:
http://img99.imageshack.us/img99/6999/img12764bv.th.jpg
I think Rufus7 has the same room temp that TeamJapan had in their thread in the oc section.
Meatfrog, there is a way to lower your load temps, just lower the room temp to 18c. :D
I will open my windows tonight to get 15°C Roomtemperature or lower and change the Blowers with more Speed to get lower Temps. With Watercooling would be easier for me to get higher clocks. But in the near future i will try to get a Watercooling unit to get more Clocks.
My room temp was 23C!! That's not fair at all, LOL!
Kinna late for the party but is this the right Processor??
http://www.monarchcomputer.com/Merch...ory_Code=amdop
That would be the 940 socket version...
So any U.S. Site have the 939?? Thanks for the head up
Let us know if you find some... Mine has been backordered for days now.
Ok, some early results from my 146 CABNE 0530APMW.
I am on a msi neo2, which seems to undervolt and has very inconsistant voltages. They bounce all over the place.
I have done 32m @ 2800 with 1.392v
32m @ 2900 with 1.456v all of these on zalman 7700cu
1m @ 3006 with 1.536v.
My 32m runs At 3006 fail a little more than half way through. Not sure if it is temp related or what.
I don't want to push any more temps/volts through this chip until I can get better cooling, or until my room temp cools off. 72degrees F in my room now.
This is by far the best chip I've ever had. I feel I could be limited also by my psu. It is a generic 450w that came with my case...possibly my next upgrade.
Maybe after some burn in and settling of the as5, my results will improve.
Also, I am really still a noob, and don't know all the tricks yet!!
Finally got around to doing some 3d work with this 148 -
3dmark2k1 - Compare link
3DMark2k3 - Compare link
Good 2k1 score! I'm trying to get to about there with my 7800GTX and on watercooling!
Looks good. I think 2k1 is my favorite bench but anymore it makes me feel bad that I can't even get within 10k of the top.Quote:
Originally Posted by HermS
Anybody wanna sell their opty? :)
Quote:
Originally Posted by Deus Falsus
check the sale threads we arent allowed to talk about stuff like that in here :fact:
perc,
Now i´m testing at 16,5C Roomtemperature!
2850Mhz at 1,26Vc and Prime Custom FFTs in place 15Minutes 8-4096.
Heres the Screenie. Prime is running since 1h30Min. Load is 38-39°C.
Cooling is on Air with an XP90 Alu and an Thermaltake blower+ an 120mm Blower right before to get low Temps. By an opened Case. :banana:
http://img398.imageshack.us/img398/1...mfftsip.th.jpg
When winter comes, you'll be able to do 1.20v. :DQuote:
Originally Posted by Rufus7
I can't wait either...I'm hoping mine will do 3.3 on water with some 5C ambient....except my keyboard has the cold bug so I won't be typing anything :slapass:
Yeah but thats too cold für me.Up to 15°C its not too cold for me.Quote:
Originally Posted by dogsx2
After 2hours Prime Custom i´m gonna raise the clocks a little bit higher at same Vcore. Wanna reach 2900Mhz at 1,264Vc on Air.
Heres the Screen after 2Hours Priming at 2853Mhz by 1,264Vcore.
http://img282.imageshack.us/img282/2...me2h8al.th.jpg
Now i have 2883Mhz at 1,264vcore an Prime Custom FFTs In place is still runnig. Nice Little Screenie here.Now Rt is by 15,8C.
http://img195.imageshack.us/img195/5...h36m4rf.th.jpg
And i´m pushing it up to 2900Mhz in a few minutes.Maybe more.
the 8c hard drive piques my interest :toast:
those are some sick clocks though... i'm quite envious. i can't wait till i finally dig up the money to buy that 146 from vandi :)
Put back in bad dfi mb and got this on air w/bt, room temp 24c load temp 42c. Another new board coming this week, hope it last longer then last. I'd sure like to have the mb ozzimark has, how bout it??? :D
http://img130.imageshack.us/img130/4...30708ac.th.jpg
You were just plain unlucky when it came to your 144, maybe you should have taken the shorter box. :D My 144 runs almost the same as the 146, may run the same as I haven't done much benching with a bad board. The 144 will do 3000@1.4v and the 146 takes 1.45v. I still think the price/performance is in the 144. I was just blessed to get two good chips.Quote:
Originally Posted by ozzimark
If you want me to try out your mb to see how your new 146 will do, I'll fit it into my schedule. :)
the mobo is out of my hands. it actually died, thus an RMA :stick:
i'll be sure to play with the 144 in the new mobo, just to make sure the old one was wasn't messing with stuff. the large difference between max 1M and max screen, despite the low temps perplex me.. and the troubles with memory over 2.5-3-3 timing :nono:
either way, everyone will know what the deal was once the board gets here
And thats the Result of the Session tonight at Aircooling by Rt15,5°C.It was only for 2Hours and 11Minutes stabele at Prime Custom FFTs in place.
3000Mhz by 1,360Mhz Stockcore.Thats Idle Temp by 15,5°C RT on the Screenie. Load was between 42-43°C.
Heres the Screenie:
http://img384.imageshack.us/img384/7...1min3ld.th.jpg
And Suicides up to 3050Mhz at Stockcore!
http://img289.imageshack.us/img289/3...cide3ly.th.jpg
Raised Vcore up to 1,376Volts Prime Custom must be stable for longer than 2 Hours.
can anyone tell me some 144 good stepings? looking for 3ghz atleast 1,55v :S
btw some of 144 are venus and sandiegos? :s why u all guys geting 146 ? BS i dont have extra money to buy 146 :p:
Opteron 144 CABNE 0530APMW are really good for 3 Gig or 146 Opteron same Stepping.
http://users.skynet.be/pt1t/144/SPI32M_2901.PNG
This CPU likes High Voltage :D under Watercooling , With HIS and Without ICE , Room Temp +- 23°C
whata kind of sh** :( what steping is that?
And here some Pics from my System Config tonight.Only taken by a Webcam.
rufus7
looks like you have the worst sample ever +(
Yes its a very bad bad Sample. Soon i will try it with watercooling than we will see how bad is that little piece of Silicon under Prime and Stockcore. :D
http://img205.imageshack.us/img205/7...ieur8te.th.jpg
Another little Test at 1,312Vc an 2950Mhz 21min Prime Custom FFTs in place 15 minutes.
http://img263.imageshack.us/img263/2...st25m3j.th.jpg
I do also 32M @ 2.9ghz @ 1.73v
interesting'''looks like those week 36 CPUs are liking voltageQuote:
Originally Posted by Pt1t
it's bloody cold in Belgium as well isn't it heheheh cause there sure is a hell of a lot of votls
Pt1t do you have an older TBird 1400+? :)
Not so cold in belgium today , but this cpu is strange , temp isnt so high for 1.84v , got 10° on the venice with 1.7vQuote:
Originally Posted by dinos22
so what are your load temps and have you tried higher vcore :eek: :eek:Quote:
Originally Posted by Pt1t
http://users.skynet.be/pt1t/144/CPUMARK_393.PNGQuote:
Originally Posted by dinos22
I m going to try Higher :slobber:
you are one crazy mofo :toast: :banana: :banana:Quote:
Originally Posted by Pt1t
26c idle with 1.84v with water, 32M SuperPi stable at 2.9ghz? Thats just crazy! Keep the madness coming! Maybe the Belgian batch is unlike anything we've seen thus far. :confused:Quote:
Originally Posted by Pt1t
Anyone else who ordered a Vandi special not get their delivery yet? I'm about ready to go postal on the USPS....(I'm in Baton Rouge btw...)
It`s the right Burn In for the CPU. ;)Quote:
Originally Posted by gundamit
Maybe. You can see in post 703 this 148 needed 1.424v to get 32M stable at 3ghz. Now after running over 10+ hours of Prime at both 2.8ghz and 2.9ghz I can do the same thing at 1.392v.
http://img262.imageshack.us/img262/2...vlowerv6lg.png
Quote:
Originally Posted by Pt1t
Fair play, You've got balls man!!!! :eek:
Quote:
Originally Posted by Pt1t
Ram /166 , preamble 5ns.
but my water is hot
This CPU like Voltage, but isnt hot ! Highest temp during a SPI 32M @ 1.80v is only 42° (23° in my room).
"This might be the hardest thing I've read lately to believe. I'm not saying I don't believe in miracles, because I do, but to be at 1.8v with a 144 and only be at 42c on wc(or is that 42f?) is truly a miracle. Let's see a sg ss. Make me a believer."
I am now a believer. No cpu has ever been like this before. The problem is that the cpu will not last long pouring that much juice thru it even if the temps aren't high. I sure wish you good fortune with it.
dude your chip is also something people have never seen before at ridiculously low volts and ridiculously high temps..............this just looks like it's on the opposite side.........none of you can put 1.65V on your Opterons without blowing up your room......doesn't mean this one is the same.....it could be a voltage loving Opteron.....i guess once we see a bunch of other results it will show some consistency but 2x0536 CPUs so far that love voltage you've got to start thinking maybe there is something there rather than pointing fingers :slapass:
Quote:
Originally Posted by dogsx2
hey guys i get my 146 tomarrow but was interested in know if these have problems at 1:1 ? i was reading over at another forum where guys said we over at xtremesystems were getting crazy ocs but we were using dividers and not running 1:1?? ive read this whole thread and i dont realy recall any of you guys saying the mem controler on these puppys hated 1:1... anyone confirm this? i thought these had the awsome mem controlers?
thx perc,
No issues with mine, when I did my initial 1:1 testing I achieved the same ram clocks I was reaching with my old FX-55 0.13. The thing is I only use winbond based RAM so I have to run with dividers to reach the higher CPU speeds. I believe all of MM's tests were at 1:1 too, and he got above 300Mhz with his ballistix... I don't think you have anything to worry about.
Another mad belgian chip
http://img12.imageshack.us/img12/449...ronkoos0bw.jpg
(temp was 5c lower with 1.8 bios on neo2,
this is the bios which get's me lots of volts) :p:
in my case i have mushkin redline and this chips do 270 max stableQuote:
Originally Posted by Perc
in my case i cant find ram to do 1:1 there are no ram to anchieve 340 or more fully stable
look this vcore
KIDS, DONT TRY THIS AT HOME!!! :slapass:
http://img187.imageshack.us/img187/4...nosde1v5yy.jpg
Hehe , same on venice but Stable :Quote:
Originally Posted by NISCO PT
http://users.skynet.be/pt1t/0517/octt_2000mhz_vcore.PNG
An Venice3000+E3 0521DPMW same Frequency. 15Hours Prime Large.
http://img399.imageshack.us/img399/2...e15h3re.th.jpg
Did you guys that are running 1.7 and up even try with stock and then try to ease it up or did you just pop it in and start at 1.6? :slapass: I'd like to see some scaling exercises done on those. Why don't you go back to 1.4 and try again before you blow it up?
CABGE vs CABNE..Quote:
Originally Posted by dinos22
the latter are the chips that run real hot, but clock well with low voltage. :toast:
i dont understandQuote:
Originally Posted by ozzimark
are the cabge the best or the cabne ???