no its the 704s that have the vcore bug. of course vx is different, but I found the 510-2 FIX dropped my VX overclocks by a few MHz so dont recommend it.Quote:
Originally Posted by jagt
Printable View
no its the 704s that have the vcore bug. of course vx is different, but I found the 510-2 FIX dropped my VX overclocks by a few MHz so dont recommend it.Quote:
Originally Posted by jagt
Alright, thanks. I'll try the 702's. Seems like I've found the max of my CPU. It's primestable at 2.9GHz, and it benches up to 2.95. But anything over that results in an instant lock-up in '01. My goal right now is 265x11.
I am also playing the bios game to find the best one. I am going to use the 510 fix just to see how it does. If its not any better then I guess I wll flash to the 702 bios. 2915 mhz was my 24/7 speed until I installed xp64. Let us know how it works out for ya and ill do the same.Quote:
Originally Posted by jagt
I'm testing the official 623 bios now. Seems nice. Looks like I gained a few more MHz' memtest stable. There's a new option in this bios that I don't know what is though: "DRAM+ 0.3V if it's not 3.2v" What's this?
It's basically extra voltage for the vdimm if your mobo is undervolting the memory. It seems to give me .4 volts extra. If I set my vdimm to 2.7V, it will read 2.76V with a DMM. When I use the +0.3V option, it bumps my vdimm to 2.8V. It gives even more of a bump the higher I set my vdimm. I noticed with my 4000 VX that if I set 3.2V, the vdimm would read 3.28V with the DMM, but with the +0.3V option on, it reads 3.37V.Quote:
Originally Posted by jagt
Ok so I got A CABHE 0518 WPAW, does it clock any good ? I tried searching..
I jumped in on the deal from Monarch 2 weeks ago on the 3700+ and my steppings are as follows:
CABGE 0521 VPAW
I've done some searching and I've never seen ANY VPAW's around. This is the first I've seen posted anywhere. I don't have my system up and running yet. I've googled the stepping and nothing comes up. Strange. I've run out of AS5 so I can't test the chip. Maybe some people with 052x can post their results. I saw one person with a 0522 and it couldn't do over 2.5ghz (?) Hope you guys can help me out.
Anyone order a 3700+ sandy from ZZF recently? I'll be ordering one tomorrow, hope I get a good one :D
Mines not quite that bad, but it takes a lot of volts to get it to FX57 speed, at least compared to some. CABGE 0522XPBW 2.8ghz@1.61v.Quote:
Originally Posted by asianguy80
Guys check out this thread I started on getting a water cooling setup on my system if you could please. Any information would be great...
http://xtremesystems.org/forums/showthread.php?t=71133
mines arrived its cabge 0522tpmw, i guess the 0522's are the current batch, most people seem to think they suck, yay for me :)
Ehhh.. I'll be trying the CPU out on Wed. or Thursday. I'm still memtesting right now and I plan to load Windows tonight.
I have a CABGE 0522 XPMW.
BTW, for those people running at "stock voltage" is this 1.35 or 1.4? And if you're a DFI guy what do you set your % to for "stock voltage?" I dont know if its a good idea to start at 1.35 @ 100% and see how high I can clock this thing, and then slowly bump up...
San Diego 3700+ 0526APBW
2800mhz prime stable @ 1.68-1.73vcore. About on par with my good venices... just needs a touch more volts than they did.
Might add that it has the god of memory controllers. If the ram can do it, it's stable with this sucker.
I have still yet to find the right BIOS for mine...I haven't had any luck overclocking at all...
I finally went to stock settings and took the other 1GB set of OCZ from my old PC and threw it in this one to make 2GB now.
Did you get yours from zzf yet? Mine's shipping out today and I was wondering what week you got.Quote:
Originally Posted by afireinside
yup
~charlie
I ordered mine about a month ago from them...
mine wont even do FX57 speeds, to get FX55 speeds Prime stable it needs 1.66Vcore which im not willing to give 24/7. CABGE 0516 MPMW
Quote:
Originally Posted by chuckd
Naw I ordered the 9th and the idiots didn't ship it out on the 10th so I won't have it till monday :stick:
That's crappy. I ordered mine on the 9th too, and it looks like it did ship yesterday and should get here tom. wonder what happened to yours. :confused:Quote:
Originally Posted by afireinside
~charlie
Quote:
Originally Posted by Lithan
How much?!! That is not on water I hope.... :eek:Quote:
1.68-1.73vcore.
I have a CABGE 0522 which only does ~2670 Mhz absolut max...can anyone please confirm if the 0522 suck? I think they do...
Can you guys point me to more week 22's? Thanks.
Tim: I have a CABGE 0522. I don't have screens for you yet but I will soon.
I can hit about 2.6 GHz with 1.4 volts (1.35 * 104%) but when I try 2.67 GHz, it requires a voltage jump. I'm testing 1.47 right now. 1.449v fails after 16 min of OCCT. I will have a 8 hr prime shot hopefully by tomorrow morning....
Edit: Stupid me forgot to drop the memory divider down a bit. I don't want to be stressing my memory for this CPU test.
Edit: http://www.xtremesystems.org/forums/...&postcount=184
2.67 works. I'm going for 2.71 now.
It's coming today!!! They just didn't update the status and send me the tracking number till 1am...Quote:
Originally Posted by chuckd
Thanks mate, keep me informed please :)Quote:
Originally Posted by dmo580
3700+ just got devlivered to my office. CABGE 0522XPMW. We'll see how she does when I get home this afternoon. :)Quote:
Originally Posted by afireinside
~charlie
Cabge 0521 Vpaw
Quote:
Originally Posted by Spinal
What is your voltage you set in BIOS? CPU-z is very off. I get 1.36 in software when I'm really at 1.41 or something... yea... Does your Sandy prefer 11x or 10x multipliers? Just wondering cuz I got an 0522 like you too
I have the same stepping but I haven't had time to test it yet. Let me know your results when u get them :)Quote:
Originally Posted by afireinside
2.75 3d stable "ghettotek watercooled" ;) Water is probably around 35C since 30C ambiant and its after my x800 in loop.
just picked one of these up to tide me over. the stepping is 0518WPAW CABHE just got it in my phase and started messing with it. not sure if its going to be a good one or not? seems that the chip doesnt like the 11x multi over 230 1:1 wich seems odd cause 10x i can get 280 and hope to get atleast 300x10 before its starts taping out on me.... looking at the oc section these 3700's are getting some sick oc's! i was praying i got one like those guys have but i may have gotten a lemon? too early to say ill i gues seeings how ive only had it going 20 mins tops!
peace perc,
is there only one fx57 (939) the san diego to buy?
Just got my 3700+ SD...anybody knows if this is a good stepping...CABHE 0525UPMW?...I`m not home at the moment and I can`t wait...;
Regards,
Primoz
I saw today an FX57 0520MPMW 0021 but it cost +1.1k€ so that's it :cord:
How about these 4000+ SD, any good with new steping?
What's the newest stepping on 4000+ SD 05**?
Is it worth to try :D
...the SD 3700+ metnioned above is not so good...i can hit 2,75ghz but with 1,6V :slapass: not much faster than my Venice at 300*9...I`m thinking of returning it and go for an X2 3800+ :rolleyes:
Regards,
Primoz
This is my FX57 on air just surf stable but anyway on air bech stable at 3189mhz on air
http://valid.x86-secret.com/show_oc.php?id=32645
http://upl.silentwhisper.net/uplfold...4/PICT1119.jpg
have this monster cooler with a tornado 80mm on , seems to look good for OC with DI on next friday:)
sorry forgott the stepping on it CABCE 0516WPMW
Quote:
Originally Posted by chefnr1
nice and i like that setup in your rig. this cpu will fly when you freeze its ass off. yikes the noise of an 80mm screamer! :D
HAHA yes that tornado on att over 6000rpm you need earplugs the noise from it goes through walls :)
the temps on it in idle is 34-35c and on full load load cpu stresstest 42-43c at vcore 1,52v
My 0524XPMW is very bad. 2250Mhz with 1.4v is the highest stable setting :( Is the UPAW or UPMW 0525 better?
I have left it burning over the night and now started Prime...will see if it is stable when come home from work...hope it is :rolleyes: For now I can get 250*11 at 1.6V...Water cooling is under construction and when it will be done I will rise the voltage to 1.7V and hope I can get further.... :rolleyes:Quote:
Originally Posted by Riverna
Regards,
Primoz
It looks like you might be able to mount 2 - 25mm x 80mm fans front and back. It should be quieter. I'm curious how it would compare moving air over the radiator fins.
I have a SD 3700+ and it is not a good OC-er...I can get to 250*11 but stable with 1,64V...after burn in (and it get to about 62°C in full load at 1,64V)...so I`m indecided to take it or just buy it (I have a buyer) and go for an X2 3800+ E6...any suggestions?
Regards,
Primoz
My new 4000+ SD 0524XPBW 2603MHz @ 1.39Vcore AIR Prime95 Large now for 21h30min
Will try 2650MHz @ 1.39V ;)
Just keep burning it in. I am sure it will oc more in time.Quote:
Originally Posted by Primoz78
Quote:
Originally Posted by Crazykooter
Ok mate...I`ll try to burn-in for another 10 days...and wait for better results :rolleyes: But if I try to get 255*11 at any voltage CPU burn-in run just for a few minutes than reset the comp... :confused:
Regards,
Primoz
2702MHz @ 1.39V Prime95 LARGE for +15h with ZM7700CU ;)Quote:
Originally Posted by Dani
Gonna try if 2.8GHz will Prime @ 1.39V :eek:
I put my IHS back onto my 3700 SD and gained back my oc. I was stuck at 2800 mhz max with it naked and now with it back on I can do 2904 mhz again. Go figure. Some get lucky without IHS and some like me dont. The reason I put it back on tho was due to the resistors on the cpu were touching the water block which wasnt good at all imo. I will post some screen shots once I get it tested out more. I play BF2 for 2 hrs and if it doesnt crash then its stable as a rock. Prime95 is a joke Imo. Fails when it shouldnt.
Run OCCT then for 30min. ;)Quote:
Originally Posted by Crazykooter
OCCT
Goddness I've had the worst time with my computer the past few days. OCZ wound up replacing my ram (terrible RMA experience). Got replaced with some of the new TCC5 (i assume it is, since it says v1.1 on the sticker). My memory overclock still pretty much sucks. Can't go over 240 or so. But on to what this thread is all about. I've got a 3700+ CABGE 0522XPMW stable at 270x10 1.55v. I think it will still be stable at lower volts, too (or higher clock for that matter). Running a 166 mem divider so memory is only at 225. 20 hour prime stable. Haven't done too much tinkering cause I just got the system back up yesterday and managed to kill the bios today (that was fun to fix). I'm sure I'll get more into it this weekend. Oh, it's with an XP90 and panaflo fan.
yup
charlie
I have 3700+ SD like Primoz78 and this stepping sucks! (CABHE 0525UPMW) I can hit only 2750MHZ on 1.58V... :(
Well im waiting on an RMA for my GPU...
before i can set up my new rig... :(
Here is the stepping CABGE 0524XPAW
Anyone running this stepping...?
It passes occt every time but fails prime. Never had much luck with prime. I think its way to sensitive for my liking.Quote:
Originally Posted by Dani
Hello guys.
Until now I have obtained this with my 3700+ 0522 XPAW.
http://img391.imageshack.us/img391/6111/2m1065314hp.jpg
I want to make questions: :fact:
a) You think that it is a good result for a 3700+?
b) You Think that with WC can improve the results?
(The temperatures for 2.9ghz@1.65V are 38C Idle - 60C Full )
c) Am better to have left I with the Sandiego or venice of my signature?
(Both do 2.9ghz but venice is slower and warms up less.)
Thank you very much by all the aid that can lend me to decide. :woot:
Until soon
1.6v in bios approximatelyQuote:
Originally Posted by dmo580
WaterCooled @ 1.7v http://valid.x86-secret.com/show_oc?id=32275
What is safe vcore for a 3700 sandy aircooled by a xp 120`?
[QUOTE=LANero]Hello guys.
Until now I have obtained this with my 3700+ 0522 XPAW.
I want to make questions: :fact:
a) You think that it is a good result for a 3700+?
b) You Think that with WC can improve the results?
Just ran my 3700@290x10 and got this. Yours is about right. This should be over in the sd oc'ing thread. Please use thumbnails as even with dsl it jumps up and down alot.
http://img327.imageshack.us/img327/3...0x100ni.th.jpg
Any -70C luck on newer steppings guys?
hey people im new to this forum, im having problem overclocking my 4000+ SD, its a SH-E4 model, the specs below are the best i can get out of this, seems like 2.64 is the best stable i can do, even with volts up to 1.71 i cant get it stable even at 2.81ghz, 11x255, i take the HTx to 4x, i take the volt of the chipset higher, ldt volt is at 1.3, and my ram is fine, i even tried running a different multiplier, i donno what to do, seems like im the only one stuck at 2.64 if this is the max then i am very disapointed with this cpu :[, anyone have any suggestions?????
@ GAR
How hot does your chipset run with your case closed? And looking at your specs I thought with the SDs it ws better to run them at a Decrease Skew of 255...?
Hi
My SD 3700+ start at 320x10 1.75v with BOX cooler WITHOUT THERMOPASTE (im test it quickly) :D MB Epox 9NDA3+. CPU not my, and I must say it OC potential. How thinks, with what frequency earn this CPU ?
hey my chipset runs idle at 47, and load at 53....dont forget i live in LA, its preety hot at this time of year......winter will be better even tho there is no real winter here.....im selling my chip on ebay....i cant get anything over 2.64 ghz even 1 mhz above prime95 fails.....Quote:
Originally Posted by ugp
I live in Florida man it isn't any better....I keep the side off my case and I have a big fan blowing in it and it idles at 40C and load about 45-47C. It scares me when it goes over 50C...I don't like it LoL.Quote:
Originally Posted by GAR
I tried getting nVidia Silencers on my 6800GTs but they wont fit...I want to find some other way of cooling my video cards. I am thinking about putting water blocks on them but that is one hell of a heavy heat load on that with my CPU...I am not sure how it will affect that. Anyone have any ideas?
tell me about it...I live in Arizona and it gets HOTTT, my cpu idles at 55c! :( I put a big fan on the side of my comp and opened the side of the case, the temps droped by 3-4c, ROFL.... :p:Quote:
Originally Posted by ugp
Its great ain't it? Although people complain in game when I play and VoIP that there is a lot of sound in the background LoL! :DQuote:
Originally Posted by iS.Terminator
KABGE 0529 APMW anyone?
Quote:
Originally Posted by afireinside
Is that a 3700+ ??
yes indeed it is
I live on the Ga- Fl line and it's not that hot on my comp, I have air cond.Quote:
Originally Posted by iS.Terminator
I'm suprised they don't have it where you live, maybe you'll get it someday.
Yeah but to run it cool in that one room at a certain temp the rest of the house is freezing and it runs the electric bill sky high...want to pay for mine?
I'll trade. When you grow up poor, there are only three things that matter:
have enough to eat
stay warm in winter
stay cool in summer
What did the man say about this forum???Quote:
Originally Posted by ugp
Quote:
Originally Posted by craig588
This isn't "Cost-Effective-Systems.org"
Right????
HAHA I know!
0508EPMW Cooled Water IHS On !!
3GHZ at 1.4 Vcore !!
http://www.forumdeluxx.de/gallery/da..._1_4_Vcore.JPG
3050MHZ 1.48 Vcore !!
http://www.forumdeluxx.de/gallery/da...73050-1_48.JPG
3.1 GHZ 1.52 Vcore !
http://www.forumdeluxx.de/gallery/da...-1_52Vcore.JPG
Neext few Days a go to max OC :)
what is the best NEW week for SD
new weeks i mean 30 -> 35
are the later weeks of 3700+ overclocking as good or better than the older?
Hi..
I just have possibilies to change my A643700+ San Diego week 526
for a 4000+ San Diego. Without loose money.
What can i wait from the 4000+?
I will try getting the 3Ghz and use my OCZ like they must work, at 600Mhz min.
But actually my OC max is at 2.93Ghz with the 3700+... Actually i don't know if this is my CPU, some week are better as other..(memory controller)
memtest is stable at 615Mhz without tweaks..
The memtest pass too during hours of loop (5 + 8 + Full)at more of 300x10...278 x 11 without errors... Under windows..reboot after 10 sec.
I use the Win X64 pehraps it's the thing made this.
What do you think, All San Diego 4000+ are good Overclocker or it is like the 3700+, all is determinate by the revision.(week)
To be honest... I've tried 3 4000+ San Diego's now and they've all sucked mad balls in the OC department.
The last one I had was the best, which would do 2,977 stable but at a whopping 1.75v, the one before that would only do 2915 stable @ 1.65v, and my current one only does 2850 stable @ 1.6v.
Fed up with these damned Diego's. Ready for my Opty 146 to come in... ugh.
What are you talking about? Those are great speeds.Quote:
Originally Posted by FragTek
If you want to see results, get a 3700+ San Diego or even a smaller chip. Because of their lower stock speeds, you overclock them further to reach the 2.8-2.9Ghz area so you think you're getting a better OC, which in reality isn't true, you're just starting farther back so you have to ramp up more Mhz to reach the same speed that a 2.4Ghz 4000+ only has to gain another 4-500Mhz to reach, instead of 6-700Mhz of the 3700+.
I have a 3700+ KABGE 0529APAW San Diego that's prime/memtest/3dmark stable at 2.85Ghz (317x9) with 1.66vcore. My temps are 36ºC idle and 46ºC load.
I am curious to mind my minimal voltage at stock clocks on my 3700+. I am running 200x11.0 right now testing Prime Stable at v1.3. Who has played with this so far...
In real if i ask this is really cause i have trouble for stabilise my OC...
I use OCZ PC4800 Plat. TCCD and really if they run well under memtest at 615Mhz without error (witout tweaks a lot too) I don't arrive work under windows at 300x9
or 300x8... This begin really make me crazy... Under memtest i have no errors at all with an OC at 302x10 and higher ( test loop 5+8 and Full during 4Hours minimum at each speed) At 300x8 or x9 i can't enter windows without crash directly after some seconds.. :slobber: .
I have change for the 3700+ only for use the DDR at 600Mhz and ... nothing to do.. i don't arrive at this.
Actually i m Prime stable at 265x11 (268x11 too) with 2.5-3-3-7 1T, Tref 4708.
It s pehraps too the Win X64 doing this. The Win X64 work on memory controller,
remap the memory and increase the possibility of Virtual memory.
Normally the X64 instructions increase the virtual memory potential.. this is do for server.. The virtual memory max of a OS32Bit is 16Go for 4Go of Phisical DDR when the OS 64Bit can allow 16To and can work with 32Go of phisycal memory. It s clear, its absolutely not useful with actual desktop motherboard . But this will pehrpas the OS64 work on memory.. So the ask with the stability when OC
If you have an idea...I take
Small Update 3160MHZ 1.56V Cooled with WC IHS OFF !!
http://www.forumdeluxx.de/gallery/da...3160-1_56V.JPG
Hello all, i've been read this forums for a long time, but im think this is my first post on it .. so, please , excuse my english.
STONKA, what kind of revision is ur SD ? SH-E4?? , i didnt ever seen nothing about this revision.
508EPMW 3700+ but Cpu-Z 1.30 show SH-E4 old version 1.29 show E4 !!
Thats all :)
- Report of Stonka post
" Small Update 3160MHZ 1.56V Cooled with WC IHS OFF !! "
What is "IHS" ????
And Stonka can you tell me plz what is the DDR you use..?
I m curious... lol
For the "SH E4"... I have verify on AMD, there's no "E4" Certainly the CPU- Z have shorted the revision or AMD have change name since 1.29.
All revision is named SH-xx in real...
Other thing... what do you think about this .. yesterday i have do
a prime during 2 Hours... No errors.. I boot this morning at same settings, same bios and.. hmm Prime fail directly... Speed fan show no big variation on all voltage, in real only the 12V decrease when begin full load (Prime) but only of 0.03V and stay stable then. all other are stable..
Only thing i have do is cleaned my rad of my Watercooling this have give me a decrease of 3°C..lol
PSU problem??
IHS = Head Spread of A64er chip !! remove = without and you become better Temps !
I dont think PSU you have 630 Watt !! I have 480 Watt Tagan U01 and this is OK for my SD and 3160MHZ !!
mayby ram ??? it is very dificult to say this and this could be wrong that your pc is not stable at the moment with prime95.
Nice if it's remove temp. I havethink it can be that but was not sure.. :D
But i can't with my CPU cooler (Watercooling) the pression will be really too high without the Heatspreader, the cooler is fixed with a screw on middle of it. Screw on with a dynamometric key.. at 37-40 Kg
I think the OS x64 is pehraps a problem too... More i look and more i think the X64 instructions unlocked give bad thing in OC... The Win X64 is working on memory controller. the x64 instructions work on the memory use and Pagination, virtual memory. it can work with 16Go of DDR vs only 4Go for the 32bit...
Acutally i have some problem with this OCZ... a pain to stabilise at 300Mhz..
Ok some memory controller of the 3700+ don't work with a 300FSB... my CPU can't pehraps.. other i have make run the metest during 4 hours this morning at same settings... No error.. Directly when i am under windows.. instability come.. I will say i can play at BF2 all Graphics at max 4xAA and 4-8AF without crash..
32M pass and the OCCT too..
Pehraps the mobo... my PSU have 2 Rails 20A + 18A, this is enough for SLI system... but i don't know pehraps the mobo have a problem.
for the OS i will see today i go buy one Win XP Pro 32bit today.
Anyway i keep the x64 and will see if there's a difference.
I am looking to buy either a 3700+ or a 4000+ San Diego. I can get the 3700+ for about 90 dallars cheaper. What I am looking for is to run it at 2.6 Ghz without alot of volts. Other than the 200Mhz faster, is the 4000+ virtualy identical to the 3700+? I will be cooling with a big typhoon 120mm air cooler. What would u guys recommend?
I think the 3700+ would be fine...I was running 2.75GHz fine 24/7 @ v1.63Quote:
Originally Posted by im20nrollinhigh
Really hard to say... the core is similar... But one thing interessant for OC the 4000+ have the multi at 12x... If you fall on a good revision the 3Ghz is easy to get... In real all depend of the revision.. I f you don't want OC a lot... Hmm the the 2600 is easy to have. with both..
he he... My 3700+ begin to give me pleasure... Now i can boot easy at 276x11 or 300x10... Prime not stable.. need tweaks and work for more for this.
anywise the major part of instability seems gone at the time i have reinstall a XP Pro 32bit... ( i was on X64 before.)
http://img29.imageshack.us/img29/3297/276x110en.jpg
Edirt... possible to bench now at 273x11: 3003Mhz...
I am running my 3700 sandie @ 2850 on 1.51 vcore... it's a KAB2E 0532 XPMW stepping... seems like a good OCer, but my mobo does no run a mem divider which is not 1:1 with the fsb and be prime stable, for some reason. it's bizarre... games work though..... and my memory will not go over 260, so I am sort of stuck at the moment @ 259x11... I ran it at 273x11 with the 10:9 mem divider, with only 1.566 vcore and was gaming and benching... 28.5s 1M super pi times... but prime would fail... I am in the market for new mems, Crucial Ballistix tracers (2gb kit) and a DFI SLI-DR expert mobo.. when it's available (~ 1 month). I have a feeling this cpu will get prime stable @ 3ghz... and go beyond... it's not too voltage thirsty, so I am thinking it will have a nice top end. :)
EDIT: here's the proof :)
http://venus.walagata.com/thumbs/agunn_3k.jpg
but I will be damned if it does not fail prime right away... but that's a nice low vcore for 3ghz! w00t. :banana: :banana: :banana:
My San Diego 3700+ can do 2860 on box air cooling.
I think it can reach about 2900-3000 with som more volt and whem my watercooling gets finished.
ASA3700DAASBN
CABGE 0516TPAW
1240918D50579
Im planning to buy a 3700+ San Diego and yesterday i visited the local computer store and they had the following stepping in stock:
ADA3700DAA5BN
KABYE 0535RPMW
1317119H50118
I have searched alot on the web but can't find any overclocking results on it. Would be glad if anyone could show me/link some results with this stepping.
I have not seen that KABYE stepping before... mine is KAB2E... and 0535 seems very new. mine is 0532 and it's a good OCer... Anyways, it's hard to tell what results you will get, but you could blaze the trail to the new stepping OCing results. :)
Yup...that is how it has to be done...Mine did 2.75GHz just fine no problems really.
I just bought a 3700+ a couple days ago, it was this exact stepping kabye 0535. I just got around to overclocking it today and with little burn in, its doing 3200 stable. This is a great chip, its only on an original prommie. Im sure it has 3300 in it. Now for some memory thatll do 300 fsb.Quote:
Originally Posted by Fiskekrok
whoa... damn... nice! what vcore does it need for 3.2??
I only had to put it at 1.35 x 110%, however I was messing with the memory trying to get it to go higher. I had to bump it up cause im in a rush right now, but here it is at 3.2@ 1.5 volts. When i have a day I will see what she can really do. http://home.comcast.net/~impulse/3700/3700.jpg
ouch... this revision seems really be on the best i have seen... really low Vcore needed...
getting my diego 3700+ on thursday along with the pcp&c 510 sli, really excited! :D
had to do it after recently having a nightmare buying a 3000+ venice from compusa because i was impatient, and immediately after installing it and seeing the 95C temps, my inspection resulted in the ihs ripping completely off the chip, stuck to the p90! i have never even HEARD of this happening before. i've destroyed a 3000+ winchester by removing the ihs in the past, so i know how hard it is to get those off sometimes. :P (that winny was a good overclocker too, 2.6ghz on air).
oh well, can't wait for these parts to complete my rig (for now)!
Go and get it!Quote:
Originally Posted by Fiskekrok
I got a KABYE 0537 APMW
Stock voltage goes to 2.7G
With 1.63V (Indeed, can be less than that voltage), goes to 2.9G with original HSF, passed many time 3Dmark....
http://img41.imagevenue.com/loc98/th_188_0537.JPG
http://img11.imagevenue.com/loc81/th_03d_3D01_34036.JPG
Okay I've read some really bad things about, especially the 4000+ Sandy's with the CABGE which I've got. Well I've got the CABGE 0528 CPAW and I managed to run Superpi's 32mb at 2.75 @ 1.44Vcore (ignore the CPUZ vcore.....that one is incorrect) all done on stock HSF. The CPU temps was 46 under load at that stage.....had cool weather for a change which helped a bit.
http://img227.imageshack.us/img227/1...32mb8fy.th.jpg
I know it's not brilliant, but I did also manage to hit 2.9Ghz @ 1.63Vcore last night, didn't want to go higher on the Vcore, so 3Ghz is out of the question till I get better cooling....if at all possible, I might add.