Thanks my friend........ :toast:Quote:
Originally posted by Tom Holck
I like that you keep going
:toast:
Printable View
Thanks my friend........ :toast:Quote:
Originally posted by Tom Holck
I like that you keep going
:toast:
Guys, JC has an FX...and a prommy... :eek: :eek:
44.73!! @ 2833MHz
:banana:
Some Belgian grazyness for ya :D :D I'm sure he will post the screen later..
Nice! :slobber:
Result up :)
Nice score JC, I see you beat that guy with top AMD score 3Ghz XP by 3 seconds ;)
:toast:
Any details on FSB, memory, whether you had 600 rather than 800 hyperlink ?
I see you will be going faster soon :)
Can you beat Intel ?
Regards
Andy
i dont think i can get maccis LN2 score... thats a bit of another league anyway... if i could VDDR mod the SK8N maybe i could do something though ! but unfortunately i cant. I reckon the HL is 600 because its on the NF3 ? FSB was 218 , memory 218 at 2,70V, 2-5-3-2. difficult to find better registered DDR than that i think but of course I did disable ECC.
Yikes!! Nice job :toast:Quote:
There wouldn't be anyway you could share that BIOS would there? I might be able to help with the volt mods :)
no can do m8 but to be honest i think the latest ASUS BIOS - or the beta ones - do offer multi control and voltage its just not visible until you plug the unlocked FX into it... with an operon in it all these options dissapeared from the BIOS
Wonder if there are bridges under those heatplates ?
Go on take it off :stick: :D
J/Kidding :p:
Too be honest an increase in FSB and slightly tighter timings
(board allowing) i'm sure top is possible there is a 1.95 sec gap
at least 1sec could be knocked off with FSB alone I suspect
more with the A64 as my initial impression is it scales quicker
to increases compared to currect XP range.
mickeymouse --
nice one.. using new 64 or your "old" barton?
either way its very impressive.! gratz.
nice one.. man these new ones really gives high performance for low mhz´
That would explain why the voltage options disapear on me with all the betas, it has a 246 in it. Did you try it with a Opteron in? And did you by chance try the 200Mhz for the RAM with an Opteron? My don't work, I'm starting to think it might not be the BIOS but the Opterons memory controller can't take 200Mhz.Quote:
Originally posted by JCviggen
with an operon in it all these options dissapeared from the BIOS
Quote:
Nice one Mickey :cool:
Nice one Mickey :)
Seems those new AMD's are just what I want :D
Gonna get me a FX when they come out with decent chipsets. :)
hehe nice... go get em tiger -- or mouse..:toast:Quote:
Originally posted by MickeyMouse
#6 overall moving up the ladder ;)
http://users.pandora.be/JCviggen/pifastfast.JPG
i just need more memory speed...
Nice :slobber:
Do you think its the mem that limiting the OC. Will the CPU pass 3000/3100 if better cooled?
Thinking on my Prommy cascade :D
44.78 at 2833
43.33 at 2925
It will pass Macci at about 2980 !!
That will bring the Pifast back on track, its better witout LN2
The CPU wont load at 3G even if I raise multi and drop mem speed to 100 MHz... but if i could run lower multi and 140 FSB oh boy :)
although I am sure i could run and bench 3G with 1.85V
Updated .. & request carried out ;)
cheers ! just a tiny detail you know no big deal but still looks more familiar like this :toast: :)Quote:
Originally posted by PMM
Updated .. & request carried out ;)
No Probs I aim to please :)
Quote:
Originally posted by JCviggen
The CPU wont load at 3G even if I raise multi and drop mem speed to 100 MHz... but if i could run lower multi and 140 FSB oh boy :)
although I am sure i could run and bench 3G with 1.85V
Have you seen this:
http://www.vr-zone.com/?i=131&s=1&61408
:eek:
Well i have a max of 3013 MHz with a prom so I find 3020 MHz super pi with dry ice kinda low
Yeah, JC's rig is even more :slobber:
He did SuperPi 8M (about 6mins) at 3024MHz and SuperPi 1M at 3050MHz which - as far as I can see - is over 100MHz higher than you max PiFast speed. And dryice ain't much colder than ur prommy so I wouldn't call that result 'kinda low' ;)Quote:
Well i have a max of 3013 MHz with a prom so I find 3020 MHz super pi with dry ice kinda low
dry ice is close to -80C i thought... which is twice as cold as a prom :)Quote:
Originally posted by macci
He did SuperPi 8M (about 6mins) at 3024MHz and SuperPi 1M at 3050MHz which - as far as I can see - is over 100MHz higher than you max PiFast speed. And dryice ain't much colder than ur prommy so I wouldn't call that result 'kinda low' ;)
Weldone you guys..........Keep on the good work there......... :toast:
Absolutely incredible PI scores everyone...now stop fighting, kiss and make up:toast: .....just state the facts not opinions!...keep up the good wrk!!!!:stick:
I don't see any fighting :confused:
That's pretty cool M8........You are a strong player....... :D :toast:
You're welcome........I've got ONE 256MB Kingston Value Ram PC2700(DDR333) with BH-6 chips onboard which can do errorfree in Memtest-86 and Windows 269MHz(538MHz DDR) at Cas 2-5-2-2 and everything else in full speed......I wish you where somewhere near here so as to borrow it to you for benchies....... :toast:Quote:
Originally posted by MickeyMouse
thanks HIPRO.. I figure I need 264-265 1:1 to get down to you and tom so your safe for now I think ;) it seems like an easy bench, but going .1 seems like alot of extra HW
Yes, we are the last P4 "Dinosauer" The A64 and FX-51 are soon all over in Pifast.Quote:
Originally posted by hipro5
You're welcome........I've got ONE 256MB Kingston Value Ram PC2700(DDR333) with BH-6 chips onboard which can do errorfree in Memtest-86 and Windows 269MHz(538MHz DDR) at Cas 2-5-2-2 and everything else in full speed......I wish you where somewhere near here so as to borrow it to you for benchies....... :toast:
Do you now any Internet-store in europa that can get the new Corsair-twin R 3200c2.. Can't get any in Denmark. can you recommend any Ram that can do the job with FX-51?
Have you seen my new cooling projekt at "Bowmans Shop"
310W -70
200W -80 degree
120W -90
100W -100
:toast:
Ok, not very happy with my new 2.8c (yet) but did a pifast anyway.
Done at 3802mhz 271.5 fsb
mem 5-4 2.2.2.5
Hi guys!
I know this is little OT but I think this is the right place to ask my question.
We are working on a major data base for pifast results and I'm only wondering what version of the program to use. The newest to my knowledge is 4.3 but I remember hearing bad things about the 4.2 version and thought it was worth to check up on.
Were building this result data base from the ground so it would be quite sad if we went for the ”wrong” version of pifast.
Which should we use, the 4.1 or 4.3 version?
And why? :)
Nah you get everyone to submit to my Pifast keep a
standard that way just click download ..extract..
run the Hexus batch file;).......
http://pifast.hexus.net
Ok, starting to see a little bit more performance out of this 2.8c. I hope there is more to come though.
Done at 3838mhz mem 5-4 2.2.2.5
Ok, in danger of becoming boring with posting small aprovements :)
DOne with my pc in front of an open window and about 7 degrees outside temperature and about -15 on the cpu full load.
274.43 x 14 = 3842mhz. mem 439mhz
I wonder what's keeping me back. If the computer fails it just blocks. Is this the dreaded 5-4 isue with the Max 3? Any owners with this mobo that can tell me what happens when the take theirs a bit too far?
:)Quote:
Originally posted by PMM
Nah you get everyone to submit to my Pifast keep a
standard that way just click download ..extract..
run the Hexus batch file;).......
http://pifast.hexus.net
Well we are going to use some sort of batch file to get inexperienced users to commit to pifast but first we need to decide what version to use as I said before. :)
Hexus pifast list is one thing that is favourable to the 4.1 version as there are a lot of users that use this version and probably will continue to do so.
Are there any concrete pros or cons with the different versions that you guys could share with me?
Let me know what you guys decide, the Pifast benchy is my baby over at HEXUS, I'm happy to move over to a new version if the concensus is there.
Rys
Sounds good Rys, now let's hope we can get some input from the users also.
C'mon guys, can't you give us some of your thoughts about the different pifast versions? ;)
I have started to see some of you using the 4.3 version and it would be nice to know if there are any problems with the new version.
He,he,he............Here I'm again........... :D
This is my new bench BUT with HIGH fsb and 3:2 CPU:Ram.........I think it's better this way......... ;) :D
Here is the way and the fsb I did it........
.....and with this Memory bandwidth........
Wow, very impressive Hipro5!
What motherboard do you use and what cooling on the nb?
Mobo is ABIT IC7-G with : Vdimm,VTT,Vdd,Vagp,Vpll..... :DQuote:
Originally posted by mkleingeld
Wow, very impressive Hipro5!
What motherboard do you use and what cooling on the nb?
Northbridge cooling is a Thermaltake Tiger heatsink.. ;)
BTW.here's my new one...
..and MAX benchable fsb is 349MHz for "low" benchies and 344MHz for 3DMark...
Your the man Hipro :D
what kind of 3dmark lobby hi scores does that FSB give you?
You'll see macci.........you'll see................ ;) :DQuote:
Originally posted by macci
Your the man Hipro :D
what kind of 3dmark lobby hi scores does that FSB give you?
Hipro ....
Nice work my friend......;)
Btw will be your next Setup based on A64 / A64 FX ??? or you will continue on the Dark Side ??? :D :D
Dark side for ever Dag............. :D
Thanks M8...........I think that with the FX51 and a modded Prommie you can do it.......... ;)
Here's the number one spot for a phase changed AMD :D
http://users.pandora.be/JCviggen/pifast227.JPG
I also made a 41.6 but error in computation there...
super pi goes in 29 secs
http://users.pandora.be/JCviggen/superpi29.JPG
speed is a bit lower, it was 29s at higher speed as well.
Corsair 3200 reg at 228 2-6-3-2 dual channel on an SK8N, nVENTIV Mach II cooling of course
:)
:slobber:
"JC, look behind you!"
*yoinks*
Bet I'd run fast with that rig on my back :D
That's some very nice speed with that FX setup. JC. :toast:
Now I'm definitrely lookin forward to the 939 pin variety.
well cant afford A64 right now, so I guess 244 2-2-2-11 with Interface on is the next best thing
http://members.iinet.net.au/~zzhang/5043.jpg
this pifast is some addictive §§§§
update:
http://members.iinet.net.au/~zzhang/4999.jpg
talk about system speed :eek: http://service.futuremark.com/compare?2k1=7117467
142.5 FPS car hi, 171.6 lobby hi.... and still wayyy limited by gfx card.... 480/380 clocks... this rig would pull 28K with one of the big 3D guys cards.
yeah you know my lobby high went from 168 to 172 just by going from 440/360 to 480/380 ... I reckon it will be 175+ qt those speeds... 440/360 gave me 24K exactly, 480/380 gives me 25.5K already...thats 1500 pts for a small increase in card
heh ya know to get to 480 - with huge artifacts - I am already using 1,90 Vgpu and an MCW50-T 80W pelt, this card sucks
JC, where are you atm? PM meh :) I'd send you my card if I can use the POS until mine gets back :)
I wonder if A64 single channel at 2.9GHz could beat that :D
I've ran my mobo up to 300FSB now SuperPi stable.. so 290x10 with RAM at 241 would be more than possible if the CPU just could do it ;)
and JC do the Vmem mod there FFS (use micro grabbers.. no one will ever know you did it..)!! :D
Denmark, and although the idea of a good radeon is appealing, maybe better not ;)
:banana:
Anyway results up :)
Yes, you already FUBAR'ed one of my cards :D
I don't forget ;)
Anyway, nice score mate :)
Quote:
Originally posted by macci
and JC do the Vmem mod there FFS (use micro grabbers.. no one will ever know you did it..)!! :D
Well i have some more mem volts now but the board doesnt really want to go any higher... well at 228 its the CPU that is on its end... the mem could go a tad higher still. But i guess if i could run multi 12 at this speed it could go sub 40 secs in this bench...but you cant have it all.... its already screemingly fast at 225 1:1 DC ,,, sandra gives me 6,8 GB/s buffered, and the lobby scores speak for themselves. 240-250 1:1 oh man,,,
I dont know if the 3200 A64 has the bandwidth needed to go fast in pifast... and the 5:4 divider isnt exactly as fast as the one on the Canterwood :(
well your lobby hi is with huge card clocks... and from what ive seen lobby high even goes up quite a lot with increasing card clocks,
i think we might be getting a tad OT here though ;)
Nice score on the pifast JC. :thumbsup:
Nice that you are now talking about the 40 second barrier. I am hoping to go under the 50 second barrier soon on aircooled, but we will see.
How things progress.
Nice game scores for car and lobby as well.
Regards
Andy
40 second barrier yea, but for me it's still the 50 second one I'm trying to reach :)
Scaved another tenth of my time.
A 52.33 score.
Done with 1.725v and just after the computer started up so with still a nice and cool compressor in the prommie, but with outside temps still around 20 degrees.
I'm slowly getting out of this thing what might be hidden.
Mem is at 440mhz 2.2.2.5 and all stuff in my sig is used.
this is mine...
not really, actually pretty bad for an fx-51..Quote:
Originally posted by MickeyMouse
TOMB> ownage there M8 :):):)
But my temps are bad, up to +5°C under full load.. default mach I is not strong enough :(
So it is only fully stable at 2750mhz :(
(tested many times with 100Million digits pifast41 ;))
But in games it kills the p4 ;)
In Gothic II on certain places i get with p4 @3900mhz under 20fps --> the fx-51 will give me 30fps ;)
Same in morrowind, p4 on some places 25fps, fx-51 wil give over 40fps ;)
So the Fx-51 is a real gaming cpu and wiill kill any p4 ;)
Just to illustrate a bit of good ol' socket A potency. It's a bit behind the FX's and others but what can ya do. :D
http://www.bigbutton.com.au/~lord/HP...871[1].jpg
Wow! amazing score, Lord! :toast:
512Kb L2 cache must be a Barton.... ;)Quote:
Originally posted by MickeyMouse
LORD veryveryvery nice :) barton or tbred my man??
It's a Barton, Jason. I'm still holding the torch for Socket A. :D
Also thanks for the encouragement guys. :)
I might be able to shave off a little more from the total time.
Wow! What specs are you using there?
What cooling?
This is the best score of a barton/xp by far I've ever seen!
Nice going there buddy.Quote:
Originally posted by LORD
Just to illustrate a bit of good ol' socket A potency. It's a bit behind the FX's and others but what can ya do. :D
Keep that torch burning brightly :)
mkleingeld,
My trusty Abit nForce2 +OCZ 3500 with special Barton XP. Of course R404 Vapor phase cooled. :)
CodeRed,
Thanks buddy. I'll try and turn up the brightness or is that voltages a little more. Still have a fair bit to play with actually. :D
LORD:)
Do i dare to post my result here:rolleyes: 54 sec´s.....course not with my M2 just cooled with CircleFlow(Water) max is 3600+......Prommy will PiFast in 4040:D , just have to w8 to get it back from Denmark
And holding it quite high I see!!Quote:
Originally posted by LORD
I'm still holding the torch for Socket A. :D
Outstanding job, thats most impressive :toast:
Now that I have my board and CPU both running at the same time:rolleyes: I should have a socket 940 score soon....just need to shave of a few more 1/100ths.
Not quite there yet...but getting closer :D
http://caprid.homestead.com/files/pi42.36.jpg
FX-51
13X226
2947Mhz
Quote:
Not quite there yet...but getting closer :D
Same here....:D
Nicely done btw :toast:
Yep those new Athlons sure work fast. After having a look I saw that your results were pretty impressive Mickey M. So I'll give you a nice rub on your head as well....;) :DQuote:
Originally posted by MickeyMouse
still my 2590mhz A64 is more impressive that that guys ;)
nice CAP no wait outstanding and LORD well you know your the sh*t I dont have to rub your head every time you bench at 3040mhz do I? hehe :)
When 939 pin finally gets released it should make for very interesting times. :p:
i doubt we're going to see 260 DC... its like with the NF2 boards you know...how many did you see bench at 260 ??
I think we can be lucky to bench DC 240-245...but that should be fast enough at 2-5-2-2 ! You've seen my 3D scores at 225 DC but timings were 2-6-3-2, if you can run RAS to CAS at 2 thats going to fly especially at another 20 MHz extra... 200 FPS lobby high anyone??
wow, those scores are super old school!!!
What, you were Querty57!? No you couldn't be....... LOL J/K Jason. Actually, I knew you were. I remember about the time you changed your nic. :DQuote:
Originally posted by MickeyMouse
LORD I just noticed you ahve always been following me ;) hehe J/K thought this was funny as its so old :)
BTW Im qwerty57 ;)
[img]<SNIP>[/img]
The screenie though, it's from another era as far as hardware goes. That 15.3K score was done on an 8K3A+v1.2 at a 220 fsb with Win XP and all the bloat services running. I remember because a format had been done and I just tested it out. I don't think I saved any of those old ones but I'll have a look. Because a short while later a score of 16947 had been done. ;)
BTW finally got the 3Dmark publishing probs solved with the Barton 3Ghz system.
Paul :D
There is a AMD64 entry at position 15 at 2Ghz and 200FSB doing a 49.22 !
Jason, can you pifast at default 2Ghz and see what you get ???
This seems too high.
Regards
Andy
Ok folks
Currently in middle of an update...
But Just to mention the next update will not be until Tueday
next week.
**Fugger can you please post a screenshot m8y :)
thx
PMM
Improved my score:
http://www.fewture.cistron.nl/nf7-s2/untitled.JPG
Barton 2500+ 0324 TPLV "9"
Plain watercooling
KHX3500 CH-5 @ 3.18V @ 11-2-2-2
Vdd @ 1.85
3.3V @ 3.40V
Vcore @ 2.2V
That's way out of line :confused: It should be around 54.00-56.00. My FX-51 on air running @2450 - 223X11 goes about 49.50Quote:
Originally posted by zakelwe
There is a AMD64 entry at position 15 at 2Ghz and 200FSB doing a 49.22 !
What's up with that PMM???
Nice clock Fewture :cool:
Think that was one of the earlier results rec!!!
I'll strip it and look through my Email for the Database
submission.
Prob is lads at this early stage until I get lots of results from
the trusted ones I do not have a clear STD to compare against.
However if you trusted chaps could do some comparisons at
different clock speeds it would be a big help for validating
future A64 results :)
esp those below yourselves ;)
Updated :)
Quote:
Originally posted by PMM
Think that was one of the earlier results rec!!!
I'll strip it and look through my Email for the Database
submission.
Prob is lads at this early stage until I get lots of results from
the trusted ones I do not have a clear STD to compare against.
However if you trusted chaps could do some comparisons at
different clock speeds it would be a big help for validating
future A64 results :)
esp those below yourselves ;)
Yeah, the bogus ones will get weaseled out as we are too competitive to let dodgy ones not be questioned :)
This is me at the moment at 2300Mhz with an AMD64 3200
http://www.aocb77.dsl.pipex.com/screen.jpg
I'll put the details on hexus for you to fill in the details.
Regards
Andy
PS How is Bowman doing with youe AMD Jason ?
Sort of off topic but this one was done the other day.. Once going higher the Car bug seemed to rear it's ugly head.. Then to make up for it we'd have to find out how to do the nature 200fps bug..;)Quote:
Originally posted by MickeyMouse
yum lets see 3040mhz 2k1 action :)
He should do really well. If only there was a way to unlock the higher multi's on these A64's. I would have already had one. :)Quote:
Originally posted by MickeyMouse
you know BOWMAN he got the stuff wend mornig but he's a busy man and has to adapt a evap mont for the mobo so he said by the weekend sat/sun... I might also send a VIA K8V his way if the chaintech is too much mobo for him, hehe.. J/K benches soon IM sure.
Seeing as you found some old stuff from MO here's one for you. Does it jog the memory....
LOL :) I'm sure he'll manage. Just blown the gentlemans class GF4 4400 score apart with this AMD. You know it's too easy when instead of sweating over watching it thjrough the tests you are in the kitchen doing the washing up ;)Quote:
Originally posted by MickeyMouse
you know BOWMAN he got the stuff wend mornig but he's a busy man and has to adapt a evap mont for the mobo so he said by the weekend sat/sun... I might also send a VIA K8V his way if the chaintech is too much mobo for him, hehe.. J/K benches soon IM sure.
It's not even that cold in England at present for us air cooled boys.
How did I doubt yours and quads words in the AMD64 Jason ? :)
Regards
Andy
Ok here is my updated Scores with AMD STOCK COOLING YET.....
FAST PI at 2410 MHZ
Also here is my new Super PI.......
I Cant wait to Watercool this baby with MY EXOS......
Still waiting the new Waterblock clip for A64 Socket.....
Here a pifast bench of my Duron1400 (l2 modded)
http://129.125.103.64/pifastduron.jpg
yep.. that's what I love.. tight timings at high FSBs. I used to do 230mhzFSB DC FastCPU decode, Ram timing at 5-2-2-2.0 for 3dmark and gaming. CorsairXMS3500, good sticks..Quote:
Originally posted by JCviggen
i doubt we're going to see 260 DC... its like with the NF2 boards you know...how many did you see bench at 260 ??
I think we can be lucky to bench DC 240-245...but that should be fast enough at 2-5-2-2 ! You've seen my 3D scores at 225 DC but timings were 2-6-3-2, if you can run RAS to CAS at 2 thats going to fly especially at another 20 MHz extra... 200 FPS lobby high anyone??
:)Quote:
Originally posted by MickeyMouse
the same way i million others did, lol.. I know I sold some serious A64 setups with the bragging I did over the many 100 forums on the net, lmao :)
Just did a 51.42s pifast at 240x10 1:1 2-6-3-3 on air .. not bad at all, still some to go, just found out how to get past this 232Mhz Abit limit.
Regards
Andy