Kai, what is your FSB/VTT set to?
and perfect OC nub, enjoy it.. get some Tygon tubing from Petra's Tech Shop
Printable View
Kai, what is your FSB/VTT set to?
and perfect OC nub, enjoy it.. get some Tygon tubing from Petra's Tech Shop
FSB is 445Mhz
PLL is 1.56v
FSB Termination voltage and NB Voltage set to 1.26v
think i am cursed or missing something, Q9650 @ 4.07Ghz right now on an Asus P5Q-E, but i go above that and just seem to have issues, sure i am not setting something right.
In deference to my previous post, my VID is 1.2625v :(
Well i got tired of the benchings so i decided to go for some more mhz on my 24/7 setup and see how far with the same vcore i had for the stable 4500 / 1200 original
All Room Temp = 23C
BIOS F10b
Everest Bench
http://img268.imageshack.us/img268/4...212everest.jpg
4xMEMTEST 850MB each 300%
http://img268.imageshack.us/img268/6...memtest300.jpg
3DM06 771/1800/3024
http://img269.imageshack.us/img269/6...12123dm061.jpg
Hyper PI32M x4
http://img111.imageshack.us/img111/6...2hyperpix4.jpg
andressergio,WOW 4545Mhz w/1.408v very nice
and great results too:up:
thanks mate !!!Quote:
Originally Posted by radaja
Cheers
Sergio
i really need to try going over 1.4v on my chip and see what it can do.. even on the 750i. as I've not put it in the EP45 i got yet.
put it put it and try :up::up::up: maybe you got surprised ;)Quote:
Originally Posted by xguntherc
Just ordered Petra'sTech CoolKit Elite - Rev.3
Looks like a good kit.
Can't wait to get it and see what the Q9650 can do then. =)
Cool mate best of the lucks :up:Quote:
Originally Posted by TooFastForYa
So this kit doesn't include a reservoir. What would you guys recommend?
Congrats on the 4545Mhz Sergio, you'll see after 6 months of priming the Q9650 your voltages will just get lower and lower :up:Quote:
Originally Posted by andressergio
thanks mate :up: lets hope so :DQuote:
Originally Posted by Jor3lBR
cheers :up:
Sergio
hey everyone, i just wanted to let you know that my system passed 8 hours of P95 and 20 passes of IBT and a few 3dmark06 runs successfully :)
http://i26.photobucket.com/albums/c1...final247OC.jpg
now with my watercooling, where should i go from here? :D
Well inspired by my friend Jor3lBR i finally got stability
Q9650@ 4608 (515x9) mems 1229 CL5 PL9 Standard Profile
Hyperpi 4xSPI32 Room Temp 23C
http://img40.imageshack.us/img40/272...pix32paso1.jpg
Can't prime this beast as its damn hot cauz its low vid 1,1875 but seems to do very well, i tested vantage and 3DM06 and some games and for last this 4xSPI32, will keep tweaking to see how low i can go on volts.
Cheers all :up:
Sergio
Great job Sergio!!
Thank you Tom :up: will keep trying to lower valuesQuote:
Originally Posted by OC Nub
Cheers :up:
Sergio
Well my replacement under warranty came today, a very new chip, pack date 8th June 2009, FPO # L846C013
No stress testing yet, just seeing how low I can take vcore before it refuses to get to desktop - started with 1.3v and below is stock volts in BIOS, 1.216 in CPUZ :up:
Keep in mind... my Q9550 E0 needed 1.4v in bios even to boot at 4GHz. That was a bad buy, should have gone for this chip straight away :shakes:
http://i293.photobucket.com/albums/m...Rhys/4ghz4.png
Dammit - i still cant get mine down from about 1.312v stable :(
looks like you got a good one:DQuote:
Originally Posted by LennyRhys
strange ive never seen a batch# with a C
Pure luck man - I just went into BIOS and left everything pretty much on auto, except vPLL and vFSBQuote:
Originally Posted by Kai Robinson
Yeah, finally :D and I haven't seen a C before eitherQuote:
Originally Posted by radaja
perhaps my one will start a craze rofl :ROTF:
What vPLL and vFSB are you running?
Here's what I set in bios
vcore 1.225
vPLL 1.52
vfsb 1.3
vNB 1.3
all other voltages I left on auto. Whether or not this is stable is another matter ;) (I'd err on the side of caution and say it's not :D)