Printable View
Just thought I would post this, actually, I'm pretty proud of myself.. :p:
This ss is actually stable, using the 1.1B3 bios and a 9850 (I'm sure there are better B3's but this one works pretty good!)
http://i30.photobucket.com/albums/c3...FullScreen.jpg
Still tweaking, Hopefully I can get it a little better...:up:
any winflash utilities for this board? cause i dont have a floppy or usb stick handy
I used the MSI's "Live update 3" and the board is indeed alive (after Live u. 3),Quote:
Originally Posted by msimax
It uses IE,firefox didn't
work .
i mean somthing to flash beta bios. and i only used windows to flash bios for like 3 years and never had a problem, just make sure all settings are stock.Quote:
Originally Posted by SocketMan
Can't help you with a Winflash tool Msimax... I always use a bootable flash drive.
Has anyone managed to get 1066 ram to run on this board using the 1066 setting? The only way I can get it to run is to set it at 800 then OC the HT Ref clock to 266. This seems to work OK, but it limits the combinations I can get If I could actually use the 1066 setting...
I was just curious, seems odd that I can OC it up to 1066, but can't even boot into windows when it's set to 1066 in bios (It will post/but not boot)..
You will have to manually set the ram timings in the bios.
My experiences with winflash tools and beta bioses is that they wont flash them. I needs to be forced in dosQuote:
Originally Posted by msimax
I'll be the 1st to admit I'm no expert when it comes to Ram timings Ben..;)Quote:
Originally Posted by Ben_Brown
But I did set all the basic settings according to the EPP profile ex: 5-5-5-15-22 @ 2.1v.... Still a no go, when I try to run in 1066 mode.
It just seems strange that I can clock it up to that speed but can't set that as default mode. :shrug:
I'm currently running Bios 1.1B3, but I had the same problem when using 1.4 relase version..
Mine works in 1067 ganged/unganged mode, with 2 kits (the only ones I got)
Tracers 8500 and 2x2048 Balistix 6400 regular both at 2.2V.
Using 1.4 Bios
EDIT**
IT might set RAM to 1t by default in your BIOS
or timing(s) to tight if set on AUTO
Off topic: Where did KTE go? ARE YOU HERE? *Calling/shouting*
He left the forum for some unknown reason. There's a thread he used to ask the mods to delete his account in the first section. I'll post the link.
Edit: http://www.xtremesystems.org/forums/...d.php?t=187238
Yeah, I found it myself. Thats sad. A loss for XS :(
I am defiantly no expert in RAM timings either, just posting what someone else posted previously :D. One thing that they also stated was to set the timings at 5-5-5-15 (if that is your timings anyway)and set everything else auto. That turned out to be my problem anyway.Quote:
Originally Posted by Daveburt714
I have 9550
was thinking about a 9850, but I want to see how far this board will go with this if anywhere.
how high can I get the htt/fsb ?
Well 1 person who can tell us that would be ...............Quote:
Originally Posted by demonkevy666
you!;)
Not many people (that I know) have the 9550 and pretty sure that my k9a2
had 1.3 bios when I bought it (about 1.5 month ago)
ok guess I'm going to use AMD's over drive for right now.
I shall slowy go up but 1mhz at time.
i'm having massive issues with xfire on my K9A2 its running dual HD3850 256mb's and a 5000BE @ 3.2ghz @ 1.4v
issue is xfire shows enabled but reeps no gains at all with one card in or two tried with 1 and 2 bridges and cards in slots 2/3 2/4 3/4 (slot 1 is dead) with no luck
you wont notice any gain really. i have 2 3870's and the benchmark is really not different. only thing you will be able to tell thats different is gaming. you will get higher fps at higher resolutions then other cards like the 8800gt's.Quote:
Originally Posted by cdawall
it gets ~5fps @ 1280x1024 all high DX9 better in crysis 1 card vs 2 so i guess it is "enabled" but is that really all i will get or just crysis's codingQuote:
Originally Posted by d412k5t412
I noticed there is a 1.53 Beta bios on the MSI (German) Forum.
Just curious if anyone has tried it out, or has any opinions on it?
Unfortunately I don't speak/read German, not even sure if it's
for the V1 or V2 board...
Any help from any of our German members? Achim... :D
thats really dosen't seem right do you have AA& AF off ?Quote:
Originally Posted by cdawall
I had one 3870 that can play it pretty good in dx10 on very highthe MSI 3870.
I just put in a Saphhire 3870 & in the third slot it seem to be stuck in x8 mode in even when I change to 2.0 mode it's still 8x not 16x.
My msi 3870 is in 16 x @ 2.0. the second slot doesn't seem be working right with the saphhire card the MSI card works in it though. maybe I'll have to turn off all the pci express 2.0 in the bios first.
or anything else I missed in the bios.
both AA and AF are off it might just be that im using 256mb cards...and XP so xfireX kinda sucks IMO in XP32
Do any of you guys know full details about the AMD OverDrive turbo button? I know that switching it from solid green to yellow or red improves performance, but what does the button do?
From my light testing, turning it to red mode gives me a 1,000+ point boost in 3DMark06 and 2 fps in Crysis, the downside is a 5-6C jump in temperature on the CPU. Even sitting idle it shows a increase in temp just by toggling the button. Does anyone know what it actually does to improve performance? It's not the TLB fix in my case as I'm running XP64 and bios version 1.13beta bios. I'm not a big fan of enabling AMD OverDrive on boot up because it causes my system to crash/hang. I wouldn't mind knowing what the turbo button does though. It obviously improves performance.
Batmang:I can't say I can give you the "Full Details", but I seem to remember someone I trusted (KTE?) saying that the button did this.
Green: TLB Patch Enabled
Yellow: TLB Patch Disabled
Red: TLB Patch Disabled and System Tweaks turned on (HPET) etc...
I haven't really done any testing with it myself, the ring is usually Red whenever I open AOD though...
You've got me curious now... ;)
I'll try turning it yellow and running 3D06 and get back with ya.
+1000 points seems like an awful lot!!
After some brief testing... :D
Clickable:
http://i30.photobucket.com/albums/c3...Yellow_AOD.jpg
Actually, after I opening AOD I realized it opened with the ring Yellow. I changed it to red and it resulted in a ~100 point increase in 3D06.
The good thing was it got me pretty close to my best 3D06 score ever (12089).. :D I got that score at 2.86Mhz which turned out not to be stable at stock V's..
My core temps did go up 1.5c when I changed to Red which is not a big deal I have a really nice HSF on here now....
Just thought I'd share my results. :up: