For what its worth, your sig gives me sleepless nights :rofl:Quote:
Originally Posted by zsamz_
Printable View
For what its worth, your sig gives me sleepless nights :rofl:Quote:
Originally Posted by zsamz_
its not all there:rofl:Quote:
Originally Posted by tool_462
admin asked me to shorten it:mad:
its kinda hard to sell your toys:rofl:
my son it the same he has 200+ toy cars n need more:rofl:
No, lame. Not even DDR2.Quote:
Originally Posted by zsamz_
:p:
Just kidding! :D
So you left us DDR2-addicts for now, I hope to see you again on "old-school" memory again some time in the future.
Crazy results CryptiK! :up:
ya i'm buildin a ddr3 stash now:rofl:Quote:
Originally Posted by Don_Dan
only got 3 sets:shakes:
Without cranking the CPU up to ~5.08GHz to get the read up that last 203 MB/s, I don't see this getting any higher.
570 FSB / 684 MHz (DDR2-1366 MHz) / PL 8
http://i720.photobucket.com/albums/w...b684MHzPL8.jpg
So I've here my Cellshock DDR2 800 with Micron D9GMH
I didn't got the best but ok for a beginner like me
http://img35.imageshack.us/img35/2719/cellshock1320.jpg
Validation at CL5-6-6, 2.58V with 1333MHZ (666,5)
http://valid.canardpc.com/show_oc.php?id=601968
At CL3-3-3-9 with 900
http://valid.canardpc.com/show_oc.php?id=601968
And here my AData vitesta Extreme with Micron D9GCT
http://img33.imageshack.us/img33/491/adata1170cl5.jpg
Validation at only 1140
Will get Cellshock DDR2 1000 CL5 with D9GKX, i hope they will do better
not to forget, all on air cooling--------------:welcome:
:yepp:pretty hard on that boardQuote:
Originally Posted by CryptiK
did you use the pulls?
aslanwas flash f13 or f14 bios
BTW good work
No I didn't try using them actually, I tried PL 7 but it didn't POST with 1.78 vNB. I'm so used to my Asus board with pullins that dont work at all I just forget about them. Might be worth a try, but I don't see it making it into windows let alone giving me 200 MB/s read.Quote:
Originally Posted by zsamz_
from all my ddr2 boards the ut p35 is bestQuote:
Originally Posted by CryptiK
was way too easy to hit 12k
i have retired 2 of my dfi boards playin with ddr3
gave my x38 to my son
Good, 3 sets is such a small amount.... :cool:Quote:
Originally Posted by zsamz_
I can't go DDR3 at the moment, I know I would spend too much money again, there are just too many good ICs that I would have to test. :D
Awesome! :up:Quote:
Originally Posted by CryptiK
Some of my results on A-Data 2x1 800 cl4, dunno what ics:
Lower PL would be probably possible with other divider than 1:1.
500 5-4-4-4 @ 2.02v
600 5-5-4-5 @ 2.4v
620 5-5-5-15 @ 2.4v+ don't remember exact voltage
Anyway from what I have heard it's ProMOS not D9.
http://img30.imageshack.us/img30/5876/clipboard02c.jpg
Max valid: http://valid.canardpc.com/show_oc.php?id=586151
pretty good fsb on rampage formula :yepp:
Quite normal. :pQuote:
Originally Posted by Mafio
I'm rather surprised by the sticks - they clock very good, but do they clock as good as d9?
Considering how they responded to high voltages, I'm pretty sure those ARE D9.Quote:
Originally Posted by kuebk
Hmm, what's usual voltage required by D9 to get 500-533 cl4?Quote:
Originally Posted by Shiranui Gen-An
I picked up another kit of ram, and I am quite surprised with it's performance. It happily runs through loop after loop of memtest Test #5 at 620 MHz @ 1.98v! Basic timings set to 5-5-5-15, trfc 30, trrd 3, rest auto. With this kit I also managed a low voltage SPI32M personal best of 650 MHz @ 2.19v (idle) / 2.16v (load).
SPI32M @ 542 FSB / 650 MHz @ 2.19v / PL 8
http://i720.photobucket.com/albums/w...dimmTG6400.jpg
CryptiK where did you get those?
*stares through the window looking in* I'm not a part of this anymore :(
A local store, but they don't ship internationally.Quote:
Originally Posted by kuebk
Did you sell off your D9?Quote:
Originally Posted by Ket
No, but I have a quad. Limited by quad FSB :( Most i'll probably be able to get is 500FSB.
Anyone?Quote:
Originally Posted by kuebk
Don't limit yourself to 1:1 :DQuote:
Originally Posted by Ket
Further testing the new kit. It only needs 2.25v (idle) / 2.22v (load) for 660 MHz SPI32M stable.
SPI32M @ 550 FSB / 660 MHz @ 2.25v / PL 8
http://i720.photobucket.com/albums/w...225vTGCAS3.jpg
Everest @ 550 FSB / 660 MHz @ 2.25v / PL 8 (same settings as SPI32M run)
http://i720.photobucket.com/albums/w...225vTGCAS3.jpg
Around 2.0v depending on the kit.Quote:
Originally Posted by kuebk
SPI32m isn't good for testing OC, my crucials 1066 are 600mhz SPI32M stable at only 2.12v but 5th memtest test gives errors after few seconds of benching on same voltage.
32M is the most respected memory stability test ;)Quote:
Originally Posted by kuebk
We aren't looking for 24/7 stability here.
Impressive results CryptiK, I'm tempted to play with D9 again...