0543/0546/0550/0551Quote:
Originally Posted by cdelatte
Printable View
0543/0546/0550/0551Quote:
Originally Posted by cdelatte
:woot: Caught a 165 0550 UPMW from Tank Guys today! These guys rock!
0551 VPMW up on ebay, not going to bother opening it and testing it.
I have a 165 0550 upmw that the second core is not stable @ 2.7 no matter how much or how little voltage I added. (boots into windows at 3ghz with just 1.4 volts. I had a 165 0546spmw that would not dop 2.7 stable no matter what. And I had a 0541rpmw Opteron 170 that would not do well either. My current Opteron 170 0543TPMW only does well to 2.6ghz with 1.475. No matter how much voltage I put on it it will not go any higher. If someone is willing to give up one that does 2.7ghz stable prime for 24hrs I would be very interested!
You forgot 0530 and 0547 ;)Quote:
Originally Posted by Supertim0r
wow.. their inventory must change quickly. I've been checking their site often.. I want a 170 0550 upmw. I don't think I'll ever be happy with the 9x from the 165.. especially if I ever go back to phase.Quote:
Originally Posted by foodfightr
The 165 is OOS now. Didn't get a chance to grab one.:(Quote:
Originally Posted by bmac11
It's hard getting to 3ghz with a 9x multi. A lot of times, the board will limit your overclocks. Most boards can get to 300htt, but a lot more beyond that is a real challenge.
What kind of temps are you getting with your 90?Quote:
Originally Posted by cdelatte
Quote:
Originally Posted by dogsx2
I changed that out with a thermaltake with the 120mm fan and I am now getting around 45C with 1.475 volts w/ full load and 74F ambient temps. Idle I get around 30C. I'm beginning to wonder if my PS can't hold up under load for some reason.
I seem like there must be something wrong when with 3 different cpu's you can't get 2.7 stable. Or, you on a roll of getting poor clockers.Quote:
Originally Posted by cdelatte
LOL. Basically ALL steppings MAY be good. Just remember that nothing is guaranteed with this stuff, ever.
Some technician at the plant is in the clean room stirs up a single dust particle which slips into the ubermachine...next thing ya know you have a whole batch of de-uberized chips with da "uber step"!
Hahaa, "de-uberized". Well it figures:slap: :fact:Quote:
Originally Posted by swaaye
Anyway, hopefully tomorrow my 165 0550UPMW will finally arrive. Will be posting some results soon :toast: (I hope :stick: )
i'm happy with my 165 @ 2.7 (TCCD 1:1 2.5-3-3-5)
it's running @ 1.47v... idle 23-24c load 41c with a simple zalman 7000ce led :)
waiting to build a phase change next month to upgrade (something not cold bugged :confused: )
Quote:
Originally Posted by dogsx2
:D I think it's the latter. I'm going to try my 0550 again before I sell it. Maybe reseating it again will make it run better. It does run alot hotter than any of my other steppings though. And it's also my second MB
cdelatte.... I got a nice 170 CCBWE 0550 UPMW that is prime stable at 2.75Ghz w/ 1.44v. Interested?
Quote:
Originally Posted by cdelong
Check your pm's
How you like your memory? I have mine running those same timings with 2.7v.
Runs nice 1:1, I have lowered it down to 2.8v, but too lazy to update my sig.Quote:
Originally Posted by cdelatte
This thread is turning into a FS one.
Kind of like your sig????:stick:Quote:
Originally Posted by thunderstruck!
Sorry dude, but I can't acces the FS forum >100 post. I tried to make it as quiet as possible... Looks like someone read closelyQuote:
Originally Posted by thunderstruck!
My 165 0550 upmw is still running kinda warm.. just resat the heatsink.. applied a little to the heatsink, wiped off, and then only used a small pea sized amount on the cpu.Quote:
Originally Posted by cdelatte
Along with software, are these mobo temp probes a lot more accurate than previous ones.. like on my old p4 478? Maybe I should throw on my own temp probe.
my 165 run colder than my 148 @ same voltage :stick:
The odd thing is that the temps barely go up when priming. It goes from about 39-41 idle to 46 under full load with 1.26v. Maybe its the IHS.. but I probably won't remove it since I will resell it when I find a 170 that does 3ghz+
Got my Opteron 165 0550 UPMW 2 days ago. prime95 X 4 stable for 9hr+.:D
http://img233.imageshack.us/img233/5...ultv9hr8vd.jpg
Where did you get your chip from?Quote:
Originally Posted by ivo0613