Picking up a 965 EE ... what BIOS you think I would get the most out of this chip with?
Printable View
Picking up a 965 EE ... what BIOS you think I would get the most out of this chip with?
Cause default VTT is 1.2V for Bloomfield and if vDIMM is max 1.65V it doesn't breach 0.5V difference safe limit.Quote:
Originally Posted by skuldarin
There is no connector for Go button, just a Go button.;)Quote:
Originally Posted by Visard
ya i know i just figured i'd go for it but it doesn't seem like it's gonna work for a daily setup. defference between 933 and 1000 is hardly measureable let alone noticable anyway...Quote:
Originally Posted by OC Nub
i still can't seem to figure out why LinX wont ever to a 20 pass run, keeps stoping after the first pass even on 100% stock clockings and everything is in tip top shape. would be nice to to show off the 78-80 Gflops out of 20 passes since it keeps registering 81-82 Gflops on the single pass.
Probably you uncore+ram is not stable.Quote:
Originally Posted by skuldarin
Stock doesn't mean stable, esp. with 6 rams.
Hi All.....
Official.....
ftp://ftp.asus.com.tw/pub/ASUS/mb/LG...-ASUS-0901.zip
broken linkQuote:
Originally Posted by Vinsent
here's a working one
FTP://ftp.asus.com.tw//pub/asus/mb/L...-ASUS-0901.zip
anything?Quote:
Originally Posted by The Duke
As a new member to this fraternity I'll be adding my 2 cents. So far did one quick oc last night, 200x20 @ 4ghz, watercooled @ 1.4v, plenty of room to go in my 930 I'm sure. Mem @ 1600. I know it's nothing astounding but I'll be reading up in here and getting to it tonight. I'd like to see a stable 4.5ghz out of this chip.
I tested REX3 new BIOS "0901", today.
I think that "0901" is much faster than "9124" on Air.:up:
Especially, 3DMark 06 CPU test score is improved!!
Test results reported on my blog.
"Overclocking Memo"
Tomorrow, I will test this new BIOS on LN2.
I hope, it will improve extreme cooling limit temp.:D
So... what are the changes?
You can hit 4.5 with the 930 on water no problem. I don't remember what the magic number was exactly but I think it was 21x187, replying to this on my phone so I don't have the settings I used infront of me.Quote:
Originally Posted by sysfailur
EDIT: make that 21x215, the closest image i have of a clocking near that point was 21x210 @ 1.38v (4.4ghz) on water and was at an average of 69*c at full load for my 930.
Any feedback on the new bios versions and LN2? I've been rockin 704 and I love it, so no need to change unless you guys think its better in some way. :)
Alot of problems with reading main cpu temp, cores never had the problem.
They fixed it, need more info...
http://vip.asus.com/forum/view.aspx?...Language=en-us
the latest BIOS i see on the DL at ASUS is the 0802 I just flashed to that one ... is it gonna treat me right?
http://a.imageshack.us/img12/1645/asusrogcomp3.jpg
This is the fastest I can get this to run. I'm hitting a BCLK wall at 216 with memory turned up then I have to thumb down the memory to get it to 218. I can't get it higher than 218 for now :-(
Does anyone have any suggestions on how to get this thing to run any faster ? Whats the max volts under water I can put to a 920 DO with blowing it up ?
Its probably not your chip, these boards are no better than average at best for bloomfield (welcome to the "I just wasted $400.00" club) unless you use slowmode. For gulftowm they are very good though.
0901 appears better for my 920. Now I can do super pi 1m in an air-cooled close case system.
http://img33.imageshack.us/img33/7295/465gsuperpi.jpg Uploaded with ImageShack.us
Whoa there. What board are you claiming?Quote:
Originally Posted by OC Nub
did it lower your voltages?Quote:
Originally Posted by harbin
make a guess :rofl:Quote:
Originally Posted by UrbanSmooth
yes the rexIII is a pure waste of $ for bloomfeild
unless asus decides to pull a proper bios outa their ass for bloomfeild
my rexII and my 760 classy biatchslap the rexIII on air and water;)
Well thank god I got mine for free :-)Quote:
Originally Posted by OC Nub
Won the overclocking contest at PDXLAN 3 weeks ago.
I'm going to try the new bios and see how it does.
I'm loving this board though even though im kinda stuck atm.
Is it normal for this board to have IOH Temps from 70 when doing absolutely nothing?!
Should I take the Chipset cooler of and re-apply a new layer of artic silver 5 instead of the Factory compound?
or just rma the board?
I also installed the optional little cooling block with the fan but it doesn't help....
Yes, remove the heatpipe assy and reapply TIM. They use what I can only guess is yellow dyed gutter sludge and then bake it in the oven until it turns to stone. I saw about a 5-6 degree drop in my temps and you may see much more. If still sucks RMA it.Quote:
Originally Posted by Gregski1304
Yes, a little bit. But it's just the voltage to run super pi 1m. The same o/c on 9124 bios with same Vcore can't run pi 1m.Quote:
Originally Posted by The Duke
Hello there to all.
Is it ok to have this setup for 24/7 or i have to low vcore/qpi to avoid degrate my i7-960.
Thanks in advance.
http://a.imageshack.us/img43/2693/linx4200.png