ASUS P5B-Deluxe; Problems & Fixes

Printable View

Show 100 post(s) from this thread on one page

11-15-2006, 05:46 PM
hot_fifty

omg I want the MB also to have pci 16x. godd damn :banana::banana::banana::banana:
11-15-2006, 07:05 PM
ingenue007

asus needs to work on its bios. on this newest version i have issues booting and restarting. sometimes it hangs detecting USB devices. other times it takes forever to detect IDE drives. sometimes it says CPU fan error for no apparent reason.

i just put some copper HS near the CPU HSF where it says 'heatsink' on the motherboard and has holes, but no HS there. i am running at 480 w/o orthos errors vs before where it would error. either that or it's cooler (but my room is only 4 F cooler though)
11-15-2006, 07:09 PM
Dazog

Quote:

Originally Posted by lowfat

Ya everytime i reboot the 1x issue reoccurs. So everytime i turn the computer on i go into the bios and adjust the PCIe clock.

I have the same PSU, same MB and same ram as you

I upped my pcie to 101 and the problem dissapeared.

What video card do you have?
11-15-2006, 07:10 PM
Noob-ftw

What revisions do you guys have? Which one is better, C1 or C2
11-15-2006, 07:40 PM
kayl

Has anyone with p5b mobo and Team Xtreem Micron 3-3-3-8 PC-5300 1GB RAM had any trouble getting high FSB speeds, or ya think there is a FSB limit on my CPU?
Currently im stuck at 457FSB with 9x 8x and even 7x multi with my E6600.
both on a single stage cooler and even -100c cascade not 1 FSB more.
Even with -32c on both the NB and 1.8v not 1 FSB more??????

http://img444.imageshack.us/img444/2385/3yj8.th.jpg

In the past i had a similar issue with a E6400 .
I hit the 457FSb limit then he changed the following setting here in ram
and i got an additional 80MHz at the same 4-4-4-11 timmings.

http://img165.imageshack.us/img165/6...8777bz3.th.jpg

http://img165.imageshack.us/img165/4...8775do3.th.jpg

http://img130.imageshack.us/img130/1...pi1mjo7.th.jpg

http://img66.imageshack.us/img66/133...8secnv1.th.jpg

http://img110.imageshack.us/img110/7...minsbz4.th.jpg

also tried these bios settings recommended here to get more FSB but they didnt help either

http://img171.imageshack.us/img171/116/1hf2.th.jpg

http://img296.imageshack.us/img296/6505/2oj4.th.jpg

http://img171.imageshack.us/img171/3983/3at8.th.jpg
11-15-2006, 07:43 PM
Pyr0

try 4-4-4-12-5-35-4-10-5-13
11-15-2006, 07:59 PM
lowfat

Quote:

Originally Posted by Dazog

I have the same PSU, same MB and same ram as you

I upped my pcie to 101 and the problem dissapeared.

What video card do you have?

was using either 6200 turbocache ora 7900GTO. happened with both. Although my memory died, so right now i have nothing.
11-16-2006, 03:39 AM
c_fun

Quote:

Originally Posted by Cappie

Thats a good tip, will try that, thnx:)

Nope, not my hardware cuz it hasn't changed since my previous motherboard and on that I could boot in 2 splash bars into windows(same Hd's, same cdrom, same PSU).

EDIT: I uninstalled all references to my IDE channels as you can see here,

http://img152.imageshack.us/img152/2...isabledsl9.jpg

then I disabled Jmicron in bios, booted up again and we'r right back where we started, 5 splash bars. I can't delete the AHCI thingie cuz then my SATA won't be detected anymore. So its not windows looking for drivers or devices it installed, it is what I said it was, Jmicron simply works best with an IDE harddrive running from it and its proven again:LOL: Now to find out why this is so is an entirely diff matter:( Normally you would say having nothing running from that would be better but it isn't, very strange indeed!!

Cappie'

I dont have too much time these days to do further debugs, make sure u are wihthte latest drivers, I now anywhere fro 3-4 slash bars (after a fresh install + bootvis, with all latest drivers (including beta ones)

From what you described regarding he addition of hte ATA making your boot go faster, this leads me to belive that the only PCI device that is actually mainly effected here is hte Jmicron chip.

If defrent combination yield diffrent results, i would say its either a Jmicron bios issues or Jmicron driver issue.

look for latest drivers of Jmicron i'm on 1.17.4
11-16-2006, 03:43 AM
hot_fifty

101 at pci freq do not work here after a reboot:(
11-16-2006, 05:56 AM
Cappie

Thnx C_fun, I haven't even thought of updating that driver, never knew there was a driver needed in the first place, I must have installed it though cuz I ran the checker on the ASUS motherboard cd and I think it installed the jmicron driver from that. So I am probably running a very old driver. Will edit this post if I have some results.

EDIT : It appears I never installed any Jmicron driver and I don't think its necessary cuz look what installing v1.17.04 did,

http://img90.imageshack.us/img90/4098/raidcdromnk5.jpg

now my IDE nec burner is listed as a SCSI device, and its just connected to an IDE channel so giving it raid drivers probably isn't going to help:)

PS : the second SCSI device is normal, thats just the daemontools virtualdrive and thats allways listed as SCSI!
11-16-2006, 07:40 AM
Brahmzy

Ya, don't install the JMicron driver - it will jack things up and sometimes force PIO mode on your burners. JMicron is just crap any way you look at it - it's almost worth jumping on the 680i bandwagon.
11-16-2006, 07:45 AM
gybp

i got the same results but daemon tools was instaled before i installed the Jmicron drivers by mistake... will my performace be worst now?? with the Jmicron driver installed from the cd i mean
11-16-2006, 07:55 AM
Cappie

yeah it fux up your cdrom drive, will load up cd's much slower as well once installed, but after deinstall everything seems fine. Don't care really as i'm going raid tomorrow, so whatever is fuxored upzored will be fixed in the process:) And if raid ain't working to fix my boottimes then I will slap a nonformatted IDE harddrive on that IDE channel, get a SATA dvd burner and be done with all this crap:LOL:
11-16-2006, 10:53 AM
Pyr0

after a clean install and using the audigy2 card, i'm getting less than 2 cycles of the windows loading bars every boot :woot:
11-16-2006, 11:26 AM
Getttosmurf

does anyone now how to set Marwell Youkon to 1000Mbit full duplex ? cant change to anything but 10 100 and auto sense and i get really crappy speeds uploading to my other comp = (
11-16-2006, 11:45 AM
Psyire

Quote:

Originally Posted by Pyr0

after a clean install and using the audigy2 card, i'm getting less than 2 cycles of the windows loading bars every boot :woot:

I'm getting very close to ditching this crappy onboard audio!

(drivers)
11-16-2006, 12:09 PM
Malk

Quote:

Originally Posted by Cappie

Thats a good tip, will try that, thnx:)

Nope, not my hardware cuz it hasn't changed since my previous motherboard and on that I could boot in 2 splash bars into windows(same Hd's, same cdrom, same PSU).

EDIT: I uninstalled all references to my IDE channels as you can see here,

http://img152.imageshack.us/img152/2...isabledsl9.jpg

then I disabled Jmicron in bios, booted up again and we'r right back where we started, 5 splash bars. I can't delete the AHCI thingie cuz then my SATA won't be detected anymore. So its not windows looking for drivers or devices it installed, it is what I said it was, Jmicron simply works best with an IDE harddrive running from it and its proven again:LOL: Now to find out why this is so is an entirely diff matter:( Normally you would say having nothing running from that would be better but it isn't, very strange indeed!!

How did you get your IDE drive to get recognized as such, and not as a SCSI drive?
I have 1 IDE system disc and 1 IDE DVD drive on the Jmicron controller and 2x250 GB SATA II running RAID 0 on Intels controller, but my IDE drives gets identified as SCSI.
11-16-2006, 12:22 PM
ingenue007

anyone have the deluxe board with ocz plat rev 2 ddr2 800? if so, what memory settings do you have?
11-16-2006, 12:30 PM
GrimReaper

Quote:

Originally Posted by ingenue007

anyone have the deluxe board with ocz plat rev 2 ddr2 800? if so, what memory settings do you have?

think its rated for 4-4-4-15 with 2.2V :toast:
11-16-2006, 12:56 PM
Cappie

Quote:

Originally Posted by Malk

How did you get your IDE drive to get recognized as such, and not as a SCSI drive?
I have 1 IDE system disc and 1 IDE DVD drive on the Jmicron controller and 2x250 GB SATA II running RAID 0 on Intels controller, but my IDE drives gets identified as SCSI.

Wouldn't have a clue man, this board has it quirks as you can see:confused: Minor and time will fix it, probably by the time most people are getting ready to buy new ones:LOL:
11-16-2006, 01:03 PM
Malk

Quote:

Originally Posted by Cappie

Wouldn't have a clue man, this board has it quirks as you can see:confused: Minor and time will fix it, probably by the time most people are getting ready to buy new ones:LOL:

When you took that screenshot did you have RAID on any drives?

Isnt it kinda weird that an IDE drive shows up on the Intel AHCI controller?
I thought the only way to connect IDE drives was through the Jmicron controller?
Or am i missing something?
11-16-2006, 03:59 PM
Sem

anyone know how i can clear the saved O.C profile from this board
11-16-2006, 05:12 PM
cupra

Quote:

Originally Posted by hot_fifty

lol 0903 gives me overclocking failure at the same oc at 0804. I stick with 0804, it works the best here. please make a better bios asus WITHOUT PCI-1x problem

same here, that 0903 bios kill my qx6700, no more oc with that bios, that is super suks, go back to 0801, its the best for quad.
11-16-2006, 05:29 PM
eva2000

Quote:

Originally Posted by cupra

same here, that 0903 bios kill my qx6700, no more oc with that bios, that is super suks, go back to 0801, its the best for quad.

ouch sorry to hear about your QX6700! ..what were the symptoms ? as i plan to put my Q6600 B3 on P5B Deluxe
11-16-2006, 05:35 PM
Cappie

Quote:

Originally Posted by Malk

When you took that screenshot did you have RAID on any drives?

Isnt it kinda weird that an IDE drive shows up on the Intel AHCI controller?
I thought the only way to connect IDE drives was through the Jmicron controller?
Or am i missing something?

Ahem, who says that thats an IDE drive, what you see there is the ahci controller for my two SATA drives. My nec burner is the only thing thats IDE and that only shows up as,

Primary IDE Channel
Secondary IDE Channel
Standard Dual Channel PCI IDE Controller

I just deleted them for testing purposes to see if Jmicron IDE was causing the slow splash part to windows.

Show 100 post(s) from this thread on one page