Intel 4.5GHz & 5GHz LinX Stable Club

:explode2::explode2::explode2:

Core i5 2500k @ 5317.6 MHz | 1.592 v. | ASUS P8P67 PRO | Water (EK) | L051B314 |< Over 100 GFlops >


http://upic.me/t/lk/twk_ocz.jpg


http://upic.me/t/s5/p200411_21.53.jpg

Enjoy the OP update! :D

Quote:

---

Originally Posted by skuldarin

UPDATED

---

No, it's not, LinX was stopped before taking the screenshot. :(

Quote:

---

Originally Posted by ac001

ac001 | Core i7 990X [6C 6T] @ 4539MHz | 1.429 | ASUS Rampage III Black Edition | Water | -

---

Same thing, LinX has to be running when you take your screenshot. :(

Quote:

---

Originally Posted by newhit

OOPS! I hope my recently posted "challenging bit of fun" gets in Mr Zalbard :worship:.

---

Oh, yes, it surely does! It proudly kept #1 for a bit, actually! Ended up being 2MHz too slow, though! :mad:

Quote:

---

Originally Posted by hellper

Hi everybody!

A little bit old-fashioned, I know, but here is my application to the 4.5+ GHz club.

---

Hey! Nice first post, and welcome to the forums! :)
Nothing wrong with a 4.5GHz C2D, it's perfectly fast for pretty much everything, still.
Good job on the post, also, everything is well and in order. :up:

Quote:

---

Originally Posted by TWK_OCZ

:explode2::explode2::explode2:

---

:oscar:
:smoke:
:explode2:

Quote:

---

Originally Posted by zalbard

Enjoy the OP update! :D

Oh, yes, it surely does! It proudly kept #1 for a bit, actually! Ended up being 2MHz too slow, though! :mad:

---

+3MHz FTW? :up:

PS
Somehow I don't think so :D

Fire extinguisher at the ready............
L042B076
GA-P67A-UD7
Water
Win7-64bit AVX (SP1)

I have noticed that nearly all the submissions start "L0" for the batches. I know that in the big wide world you can see various batch numbers but it does seem a bit (OK, a tiny bit :)) interesting that on here "L0" starts the majority of sandybridge submissions.

ac001 | Core i7 990X [6C 6T] @ 4605MHz | 1.468 | ASUS Rampage III Black Edition | Water | -

http://picload.org/image/olrooi/linx4600.png

regards ac001

Quote:

---

Originally Posted by newhit

I have noticed that nearly all the submissions start "L0" for the batches. I know that in the big wide world you can see various batch numbers but it does seem a bit (OK, a tiny bit :)) interesting that on here "L0" starts the majority of sandybridge submissions.

---

Our batch is the best so far for low volts OC :up:

Dont kill him with so much volts :D , for high multi my does 55x ( max bench 5560 ) what can yours do ?

http://upic.me/i/mu/yociexp83.gif


Core i5 2500k [4C 4T] @ 5341.9 MHz | 1.608 v. | ASUS P8P67 PRO | Water (EK) | L051B314 |< Over 100 GFlops >


http://upic.me/t/4w/5341.9.jpg

Quote:

---

Originally Posted by st0ned

Our batch is the best so far for low volts OC :up:

Dont kill him with so much volts :D , for high multi my does 55x ( max bench 5560 ) what can yours do ?

---

55x is dreamland for me. Mine is now warped at the corners at 5332 :D

Can you get a LinX 20+ at 55x? That has got to be a killer chip or maybe 56x :up:

UPDATE: this is the absolute max i can do until i fix some thermal walls.

4.710ghz

same everything else. mem speed at 1884 and uncore at 2x (3768) CL9 T2
gflops at 101.2, down from 102.2 so there's a bit of a wall there too.


980x BATCH: 3013A540 | 6C/6T | 188x25 (4.710ghz) | 1.55625v | Asus Rampage III Extreme | Water (Koolance cpu360)

http://i3.photobucket.com/albums/y71...s/Jackpot2.jpg

Quote:

---

Originally Posted by newhit

55x is dreamland for me. Mine is now warped at the corners at 5332 :D

Can you get a LinX 20+ at 55x? That has got to be a killer chip or maybe 56x :up:

---

I wasnt talking about linx :rofl:

I wont put my chip under linX with 1.6v :shrug: But it can run at 5561 anything you throw him, 2D , 3D you name it :p: But Linx doesn't worth the LN2 :D

i7-2600K
1.360v (under load)
batch: 3101A112 (that's what the box says)

ASRock extreme6
Air (Silver Arrow)

Win7 64bit SP1

I also did it with HT on but the GFlops are lower and there's quite a bit of variance so I posted w/o HT

http://i52.tinypic.com/ofszrt.jpg

Quote:

---

Originally Posted by vafan13

i7-2600K
1.360v (under load)
batch: 3101A112 (that's what the box says)

ASRock extreme6
Air (Silver Arrow)

Win7 64bit SP1

I also did it with HT on but the GFlops are lower and there's quite a bit of variance so I posted w/o HT

---

Nice low voltage Costa Rica sample @ 50x. :up:

Quote:

---

Originally Posted by PolRoger

Nice low voltage Costa Rica sample @ 50x. :up:

---

Yeah I'm pretty happy with it. Apparently Costa Rica is good for more than just coffee. :D

Hi guys! It's been a while since I posted here, but I got a new toy and was thinking of joinin' it too.

donmarkoni | i7 990X [6C 6T] @ 4811MHz | 1.5V | Rampage III Extreme | Water | 3028A486 (not sure, forgot to take photo, will check)

http://img94.imageshack.us/img94/678...x48ghzlinx.jpg

Donmarkoni in the hiz-ouse! Your poor 990X :D Very nice run. Remember you cant RMA an ES!

EDIT - whats it need for 4.5GHz? Whats your loop consist of and what was the ambient temp for that run? Temps are nice given the vcore & speed.

^^
good example of how LinX shouldn't be used as a performance check. i scratched at 103gflops with 4.672ghz, 101 range with 4.710 and Donmarkoni there with 103 at 4.8 AND higher uncore / mem speed at the same time. i tell ya... somethin about those sandy's, they have their way with gflops.

Quote:

---

Originally Posted by st0ned

I wasnt talking about linx :rofl:

I wont put my chip under linX with 1.6v :shrug: But it can run at 5561 anything you throw him, 2D , 3D you name it :p: But Linx doesn't worth the LN2 :D

---

Sorry. I know I'm missing something. Are you saying that LinX is not worth the bother or that LinX is putting too much stress on the chip?

With your chip I'm sure you wouldn't need 1.6v........for one hell of a good submission.:up:

Also, I'm reading on various forums that Freezing doesn't do much that's why I've not connected my new SS yet...........but, what if I did?........ ;)

Thanx

PS
I have a backup chip (yes, only one) that runs Prime Blend and SST's for hours (yawn!) and handles all the usual benches without trouble at 5GHz which I keep for daily use. I use this chip for testing.

Quote:

---

Originally Posted by CryptiK

Donmarkoni in the hiz-ouse! Your poor 990X :D Very nice run. Remember you cant RMA an ES!

EDIT - whats it need for 4.5GHz? Whats your loop consist of and what was the ambient temp for that run? Temps are nice given the vcore & speed.

---

Thanks! I guess that X in 990X stands for extreme :D so I hope it can take the punishment. :hammer: Thanks for the reminder, of course.

I'll need to test at 4.5GHz, but for 4.6GHz HT ON it needs 1.425V and everything else pretty much the same as on the 4.8GHz screenshot.

WC loop goes like this: reservoir - 500lph pump - EK Supreme (restricted) - EK VGA Supreme (restricted) - 3x120 crossflow radiator - and back to res.
Outside was around 9-10°C according to forecast and ambient was around 15°C I guestimate. Standard spring night, t-shirt and shorts.

Quote:

---

Originally Posted by skuldarin

^^
good example of how LinX shouldn't be used as a performance check. i scratched at 103gflops with 4.672ghz, 101 range with 4.710 and Donmarkoni there with 103 at 4.8 AND higher uncore / mem speed at the same time. i tell ya... somethin about those sandy's, they have their way with gflops.

---

Well, yes and no. It all depends on system optimization and feeding CPU enough voltage. I got 100GFLOPS at 4560MHz, so I see your point, GFLOPS should be higher for 4.8GHz.
My theory is when CPU frequency stops scaling with voltage and GFLOPS are less then expected, then you have went over sweet spot.

I5 2500K-3048A446 @ 5.5 GHz
Asus P8P67 Pro
Custom build SS.

http://img855.imageshack.us/img855/2...3175928.th.jpg

Time for 5.5GHz LinX Stable Club.

Quote:

---

Originally Posted by lkozarov

I5 2500K-3048A446 @ 5.5 GHz
Asus P8P67 Pro
Custom build SS.

Time for 5.5GHz LinX Stable Club.

---

WHOA!!

So, there is an SS mark-up on SB's :up:

Now where did I put that rubber matting :)

I need a reality check please................

If my SB wont get into windows at 55x on water would it be useless to hook up my SS because my ceiling is still 54x whatever the cooling?

Was testing 1208 bios for my new 24/7 and decided might as well to submit :)

I7-990X 3045A643

Running
Attachment 113936

Finished
Attachment 113937

Tried to get 4.8, only passed 11 loops. Just 60MHz :shrug:

Core i7 980X [6C 6T] @ | 4.794.2MHz | ASUS Rampage III Extreme | Water | 3005F801

http://dl.dropbox.com/u/22074005/Xtr...tems/4.794.png

Update, I did it. Got my 4.8

Core i7 980X [6C 6T] @ | 4812.8MHz | ASUS Rampage III Extreme | Water | 3005F801

http://dl.dropbox.com/u/22074005/Xtr...ms/4.812.8.png

Updated! :cool:

Quote:

---

Originally Posted by newhit

Fire extinguisher at the ready............

---

:D
Good job! Tight competition, almost HWBot scale! :up: :ROTF:

Quote:

---

Originally Posted by ac001

ac001 | Core i7 990X [6C 6T] @ 4605MHz | 1.468 | ASUS Rampage III Black Edition | Water | -[/IMG]

---

How do you like your ASUS RIIIBE?

Quote:

---

Originally Posted by donmarkoni

Hi guys! It's been a while since I posted here, but I got a new toy and was thinking of joinin' it too.

---

Nice toy, and glad to see you back! :)

Quote:

---

Originally Posted by lkozarov

I5 2500K-3048A446 @ 5.5 GHz

---

Outstanding, congrats on such a huge milestone! :eek: :up:

Quote:

---

Originally Posted by lkozarov

Time for 5.5GHz LinX Stable Club.

---

You'd feel a bit lonely, wouldn't you? ;)

Quote:

---

Originally Posted by McDown

Was testing 1208 bios for my new 24/7 and decided might as well to submit :)

---

Nice job, but please remember to mention the way you're cooling your CPU. I had to look up some other posts of yours to find out.