Enjoy!
http://img7.imageshack.us/img7/6360/dsc04521ng.jpg
Printable View
i have changed psu and hard drive....
http://img156.imageshack.us/img156/3408/deluxerig.jpg
What is that CPU cooler? I notice you have the same issue I have with mine. The fan gets in the way of one of the ram modules. It wasn't a big deal until I upgraded to the full 16Gbs. One of those modules is kissing the fan.Quote:
Originally Posted by Andrea deluxe
My rig ain't extreme but anyone want some pics? It's the stuff listed in my sig below. It's not the latest greatest but OK for a disabled old fart. :rofl: :ROTF:
:):)
Quote:
Originally Posted by dalek
it's a HR-02 http://thermalright.com/products/ind...at_id=27&id=95
what cooler is this?Quote:
Originally Posted by ragnarok95
i just got the p67 sabertooth board so im bouncing around ideas of what cooler to use.
Noctua C14
My Fractal Design R3, definitely not finished but it should be this way for a little while.(really need to do something with the ty-140 fans color wise)
http://a5.sphotos.ak.fbcdn.net/hphot...3_128379_n.jpg
Man that Shaman takes up a lot of place. Can you even fit a sound card?
yea i could easily fit a sound card, the angle does make it look like it sits very low but the two bottom slots are usable..i could fit another gpu i believe but with stock cooling which is too loud so it looks like im stuck with single gpu for eyefinity for now.
SilenX cooler? :)
great looking build seba.
i really should get my psu sleeved. going to start putting my build together soon.
Nice clean build Seba
Looks nice man. My R3 came damaged from UPS and I was so pissed that I just took a refund. Looking at your build makes me wish I had just got a replacement.Quote:
Originally Posted by InCredible
a quick pic from the start of my new build. only thing missing from the pic that I got finished last night was that I have a Scythe Himuro in one of the 5.25" drive bays for a hard drive.
http://i2.photobucket.com/albums/y43...2-20-13_79.jpg
All fans are Noctua NF-P12. Will be using a Noctua U12P SE2 as the heatsink.
emailed Martin at PsychoSleeve today to see what he can do about matching colors of sleeving to the Sabertooth P67 board.
Thanks man appreciate the comment, hardly get any cause I have a horrible camera haha...but that definitely sucks receiving a damaged case...i hate ups for that reason they are care less..the case is definitely great and I love it, few tweaks it'd be prefect but overall does very well and is super quiet..i just really need to do something with the fans color wise just haven't decided yet on what I should do..thanks againQuote:
Originally Posted by chuchnit
WOW !! Nice looking dust magnet. :rofl::rofl:
:):)
That might go well with the new deepcool assassin(?) cpu-cooler :)
its not a dust magnet... its an air filter :p:Quote:
Originally Posted by dalek
http://i2.photobucket.com/albums/y45...k/841ded91.jpg
http://i2.photobucket.com/albums/y45...k/635299a7.jpg
This case is old and freaking heavy.
Actual setup. I will paint inside mate black in a week or two.
Enjoy and sorry for the size....I will fix that asap.
http://img838.imageshack.us/img838/4710/dsc0967.jpg
http://img838.imageshack.us/img838/1897/dsc0963.jpg
My setup for now. I have lots of plans for this case that first require me to get a job. Specs in sig
http://dl.dropbox.com/u/464374/Photos/IMG_8141.JPG
I have a quick question. I have a Cooler Master case that hase the LARGE 230mm fans. It has holes for putting in either 120 or 140mm fans as a option. Would the 120 or 140mm fans blow more air than the large 230mm fans? The 230mm turns slow but it does move a lot of air. I'm sort of thinking tho that the smaller fans would blow more and would certainly be able to force more air through the case.
Thoughts?
the larger fans can move air but the smaller fans will have more static pressure. I don't think its worth the change. Stick with the 230mm fans.
I do run pretty cool. This case is not as cool as my old case but it stays fairly constant regardless of load. When I compile something or do something else that makes the CPU run at full load, it only gets a few degrees warmer. Right now, my ambient temp is 80F and the CPU is at 82F but it is idle. I don' t remember it going above about 90F even at full load. So, I'm not complaining any.Quote:
Originally Posted by vengance_01
My mobo controls the fan speeds. It does speed up the fans a bit when I get a load on it. I still can't hear it tho. This case is MUCH quieter than my old one.
Thanks much.
http://img703.imageshack.us/img703/2...04cutscale.jpg
It's not extreme but it is pretty swift for me.
Ill add mine to the mix more pictures http://img155.imageshack.us/g/dscn0129b.jpg/ gotta love the Phobya fans
http://img339.imageshack.us/img339/5...cn0086k.th.jpg
http://farm6.static.flickr.com/5070/...7fbebde7_b.jpg
How many Noctua P12s? 7. Changed the direction of the cooler to exhaust primarily out of the back.
Love that picture hieuhef! Nice =)
Heres my lovely well outdated rig also these are pretty old photos but the computer looks exactly the same.
I've never failed to love this case, had it since I first started my project nearly 4 years ago now
I've done a few mods.. dual 80mm's at the back, dual 120mm fans at the top which originally just consisted of one 80mm fan..
Cut a few pieces of alluminium here and there to improve air flow, cable management blow outs aswell.
I also removed the hard drive bay out of the bottom so the front fan has no restriction to blow cool air to the GPU and into the case.
If i could do anything else to the case id like to give it a fresh look inside and respray it all, but I am so lazy, i've only recently just got back into the whole computer scene again, as you can probably tell by my specs in my signature!!
anyway enough of the boring stuff heres some photos starting with the shell when i cut out the two fan holes.
http://i80.photobucket.com/albums/j1...337/holes1.jpg
http://i80.photobucket.com/albums/j1...7/DSC03259.jpg
http://i80.photobucket.com/albums/j1...7/DSC03245.jpg
http://i80.photobucket.com/albums/j1...7/DSC03250.jpg
http://s80.photobucket.com/albums/j1...7/DSC03244.jpg
http://i80.photobucket.com/albums/j1...7/DSC03243.jpg
http://i80.photobucket.com/albums/j1...7/DSC03242.jpg
http://i80.photobucket.com/albums/j1...7/DSC03260.jpg
Over the last week i've managed to scrap up the money to upgrade my computer slightly...
ive finally gone to Windows 7 from to many years on XP and went ahead to give the operating system a fresh foundation by also buying a Samsung F3 1TB drive.
Aswell as getting another matching 2gigs of ram, to equal 4, runs lovely.
Anyway enjoy, let me know what you think :)
Here's my little monster!
http://i3.photobucket.com/albums/y90...2/DSC01840.jpg
horrible horrible quality pic but my gpu died and found out while right after taking this one and only pic so its disassembled now but since i found out its dead it wont be back together like this for a while. anyway here it is..fractal design r3
Attachment 116117
@InCredible: sorry to hear about your gpu...but looking at that pic, it's really bent.
wow, never noticed that honestly...i think the 24pin was pushing it down since it comes right below it in the mobo and plugs in above it...need to look into a reroute if i even get one from rma(its diamond so i doubt expect it)
What cooler is that on your gpu?
Is the cooler not the reason for the bend?
I have seen more pics of people with heavy coolers and bending gpu's...
its a thermalright shaman isnt it?
yes its is the shaman, ive had it for probably 2-3 months...like said im not sure if it was the cooler or 24 pin connector which literally comes out right at the card and sits on top of the end of it...this could of been pushing it down or maybe the cooler..the reason im assuming the 24pin is because its the back of the card right where the 24 pin is at...idk though, either way i just hope Diamond gets me another one :(
Damn nice rigs guys.
Updated my RIG and some cable management
Attachment 116352
What case is that?Quote:
Originally Posted by Ar3s
And some management? =)
what case is this?Quote:
Originally Posted by blind_ripper
Looks like Lian-Li PC-V354
Windy Soldam Alcadia FX2000RQuote:
Originally Posted by AMD_Freak
Yup that's right, posted before but it didn't look like this.Quote:
Originally Posted by silis
my HTPC CPU cooler...
https://lh3.googleusercontent.com/-A...0/DSC_0034.jpg
Oh wow, nice sleeving man. all the way to the connectors.
indeed looks very nice! :D
oldschool :)
https://lh6.googleusercontent.com/-a...ianLifertg.jpg
What GPU & cooling? Looks just dandy! :up:Quote:
Originally Posted by martensch
it`s a small XFX 9600 GT with a Scythe Musashi passive... :) thanks...
https://lh4.googleusercontent.com/-J...800/9600_2.jpg
After a long time without cleaning the dust filters on my Fractal R3, this is the result :D
http://img40.imageshack.us/img40/5992/dsc00070au.jpg
But inside the case, there was almost no dust :)
I have that after 3 to 4 months already xD
Nice HEPA filter you have there! :DQuote:
Originally Posted by dacosta89
Gone from a watercooled X58 setup to an aircooled Z68 set up.
http://homepage.ntlworld.com/pauld.dalton/tj072.jpg
Nice rig matey
How is the transition from water to air cooling treating you.
Singature system
http://i.imgur.com/BIDDx.jpg
http://i.imgur.com/9XIu3.jpg
ps: terrible pic"s sry mobile phone
i flipped a 98gx2 inside out
not pretty but it works.
http://img204.imageshack.us/img204/1...0729132747.jpg
http://img21.imageshack.us/img21/186...0729132849.jpg
http://img508.imageshack.us/img508/5...0729132729.jpg
wrong section...
this is GHETTO MOD!!!!
:asd:
amazing rig pet! :up:
nice little red box :clap:
@emoners
thanks bro! :D
@freakya
thanks for appreciating my mod :)
Very (big) nice :clap:
Attachment 118746
Not Done yet..took me 4 months to get here..But Fun :D
My new RIG
http://www.abload.de/img/systemqu1j.jpg
Stumbled across this website while researching some things. What was I researching you ask? I recently just got into the whole PC-modding game. This is my first build, and it really got me interested in modding. My system sucks compared to the ones I've seen here, but it's a start! Cheapie CM212 for now. :D Will probably replace with something sexier or decide to go watercooling.
Tried my best to do wire management for a first timer. =)
http://img546.imageshack.us/img546/3075/dsk3.jpg
http://img97.imageshack.us/img97/1526/dsk6.jpg
Lame attempt at cleaning the back side. :p:
http://img7.imageshack.us/img7/5229/dsk2.jpg
Planning to replace the RAM coolers with some Arctic Cooling RC Pro, repainted white. As well as ordering a "few things" from MDPC to sleeve all the cables. Did I mention, I'm a total noob at this? I hope by attempting to sleeve now I don't set anything on fire (like myself) or break anything. The only thing that really bothers me is that little hump on the PCI connector by the video card. Don't know what it is, but it's solid. Don't think I can remove it. It's unattractive...
About them ram coolers. I made a little booboo with this. When I ordered the RC Pro's from Newegg, I thought each order was for 2 sticks of RAM. Newegg didn't specify. And it had a lack of reviews for it. I proceeded to google it to see if I could find an answer. I didn't, so just ordered one. Well. It's just my luck that 1 order = 1 stick of ram. So for anybody ordering it, or planning to. Take note. :)
http://img840.imageshack.us/img840/808/dsk5.jpg
By the way, anybody using those Zalman shark blade fans (black&white). It looks really nice, and comes with black sleeving.
What is that... thing cooling the CPU? It looks pure sex!:DQuote:
Originally Posted by RoughNeck
http://www.pctunerup.com/up/results/...7_IMG_4655.jpg
http://www.pctunerup.com/up/results/...4_IMG_4645.jpg
http://www.pctunerup.com/up/results/...0_IMG_4656.jpg
http://www.pctunerup.com/up/results/...2_IMG_4653.jpg
http://www.pctunerup.com/up/results/...3_IMG_4650.jpg
http://www.pctunerup.com/up/results/...6_IMG_4651.jpg
Patrock84 it looks absolutely fantastic..!!
What are the specs of the hardware? I supose the case is the new TJ08.
Thanks! ASUS Max. IV Z68 Gene-Z, i7 2600K, Dark Rock Pro C1 Cooler, 4x 4GB DDR3-1600, GTX570 Phantom, 256GB SSD, 2.5" 1TB HDD, Auzentech 7.1 Forte, Corsair AX-850 and yes, it's a TJ08-E(volution)!
what ram is that looks nice
i believe thats G.Skill Ripjaws. I have a 4GB(2x2GB) and it works great with the P67 Chipset:up:
NZXT Havik 140 up in smoke!
http://www.abload.de/img/havik140suxv.jpg
http://www.abload.de/img/havik140_2hucn.jpg
I love that be quiet cooler. You have a classy looking build!Quote:
Originally Posted by patrock84
I have the same ram kit. It does look good w/ the new Asus 1155 high end boards. :up:
new Corsair HX 750W
http://i55.tinypic.com/2e21nv6.jpg
Attachment 119996
Changed out the Cooler Master Hyper 212+ with a Thermalright HR-02 and added (lots) more RAM since the last pic.
New VGA :D ASUS ENGTX570 DCII with Thermalright Shaman <3
http://farm7.static.flickr.com/6176/...7fc681c6e8.jpg
ASUS ENGTX570 DCII von Tommy_Hewitt auf Flickr
http://farm7.static.flickr.com/6173/...a73e242a1d.jpg
ASUS ENGTX570 DCII von Tommy_Hewitt auf Flickr
couple more recent pics even though its dirty :(
http://a6.sphotos.ak.fbcdn.net/hphot...34084245_n.jpg
http://a3.sphotos.ak.fbcdn.net/hphot...39213123_n.jpg
Those are piece of art!!!
like mine....
I need to take a better picture but still;
Attachment 120317
:confused: Only the cooler and the fans are the same ^^Quote:
Originally Posted by Andrea deluxe
yea!Quote:
Originally Posted by Tommy_Hewitt
Just finished modding my new Fractal Core 3000 front panel and sleeving front panel cables:
http://i746.photobucket.com/albums/x...d/DSCF5673.jpg
http://i746.photobucket.com/albums/x...d/DSCF5681.jpg
http://i746.photobucket.com/albums/x...d/DSCF5680.jpg
http://i746.photobucket.com/albums/x...d/DSCF5679.jpg
http://i746.photobucket.com/albums/x...d/DSCF5676.jpg
http://i746.photobucket.com/albums/x...d/DSCF5651.jpg
^^Very nice, what fans are those on the front?
Thanx! those are nzxt fans and they look just like stock Fractal Design fans which this case came with. By the way the top fan is 140mm and the bottom one is 120mm.