SuperPi32m 5Ghz Ivy All Out Challenge!

Quote:

---

Originally Posted by nachtfalke

memory cpu-z tab - tRAS20 , timming configurator tRAS18 ....

I havent seen before 1327 mhz with psc and tRAS 18 ...

---

Yeah didn't notice that until I posted, its actually 20 for the run. I setup the screen, took a picture with my phone since it would occasionally crash while taking a screen and forgot to save a screen before I started setting up for the next run. Set tRAS to 18 to test for the next run then realized I forgot to save the screen and went back to do it but forgot to change it back in memset.

http://i.imgur.com/8k6GCwY.jpg

I also haven't seen psc run 1327MHz tRAS 18, crashed as soon as I hit apply :p:

Awesome run Deux:up:

@Deux - awesome psc kit and nice score:up:

Another sick low 16s run for the scorebooard well done guys & deux.

It's getting better and better :D Excellent run deux ;)

Hey guys,so whats the go with a new Haswell 5GHz challenge,has there been any talks on this.If and when one will take place
Nice runs Nachtfalke and Deux :up:
Thanks Don_Dan for update mate :up:

I think we should keep the same format for haswell 32m

5ghz +/- 3mhz
Use Super Pi Mod v1.5
aida64 cache and memory benchmark - run this after sp32m for obvious reasons.
cpuz: cpu tab + memory tab + motherboard tab
Memory utilities: Asus MemtweakIt! and or Gigabyte TweakLauncher Or MSI Control Center, Asrock and Biostar

I've had loads of fun with this thread & would 100% be in for a 32M challenge thread with Haswell @ any clock or format.

IMO the original format was great when only your best score was shown. I do however very much like the idea of every score/ic/chip variant, ability etc having a place which would also be great for comparison like the current format is.

Maybe have a top ten & then all posts including few too many MHz, lack of proper screen etc taking up the rest of the page. Perhaps first post is the challenge 2nd post for everything else idk.....

not sure if all retails can do 5ghz :( , we will see

i think 4.5g is more reasonable for haswell...

Quote:

---

Originally Posted by crustytheclown

i think 4.5g is more reasonable for haswell...

---

Quote:

---

Originally Posted by hiwa

not sure if all retails can do 5ghz :( , we will see

---

That would have been my question. Should we stick with 5 GHz or switch to something a bit lower, like 4.5 GHz?

I thought Splave might want to use his thread for Haswell, or I'll make a new one for Haswell with the same format as this one.

not all ivy could do 5 ghz either,i had two that topped at 4900&4950,golden ones :(

Quote:

---

Originally Posted by Don_Dan

I'll make a new one for Haswell with the same format as this one.

---

That will be awesome Don:up:

Honda City's original thread was good because it eliminated unnecessary post and rank the best timing from each peep with periodic updates. Simple, easy to read and to find particular info.

5Ghz +/- 3Ghz or up/down will make submissions uniformed. As long as limitation set then it will be ok.

No time limit for submission? Probably until next gen. cpu release:)

Just my 2C

Not much but at list I cracked 18
xBrytanx - 6:17:969 - 50x100.0 - 1300MHz - 7-10 -6-22 ASRock OC Formula -Adata 2000x (BBSE) CL9 2x2GB - 2.1v - Cpu -60/RAM -130c LN2
http://imageshack.us/a/img12/5237/lastday3c.jpghttp://imageshack.us/a/img824/8594/cimg1471f.jpghttp://imageshack.us/a/img839/3632/cimg1480dj.jpg

Nice pic man :) and good score:D

TaPaKaH - 6:18.390 - 50x100 - 1300MHz - 7-10-7-24 - M5G 0086 - 2x2Gb PSC 1.92V - cpu air, mem -50

http://abload.de/img/snaphsot0013tkcni5hovc.png

I must have done something wrong with the OS since my last loop is constistently 13.4-13.5s whereas everyone else has it under 13s at same sort of speeds.

Quote:

---

Originally Posted by TaPaKaH

TaPaKaH - 6:18.390 - 50x100 - 1300MHz - 7-10-7-24 - M5G 0086 - 2x2Gb PSC 1.92V - cpu air, mem -50

http://abload.de/img/snaphsot0013tkcni5hovc.png

I must have done something wrong with the OS since my last loop is constistently 13.4-13.5s whereas everyone else has it under 13s at same sort of speeds.

---

isnt it maybe the 700 maxmem? fast start slower end, and or ramdisk? i wouldnt know tho you thought me :P

Update.

^^^ Thank you Sir

So had few lrts Ln2 left the other day and decided to give ivy 5Ghz another shot,not quite there,this was .172s faster then my best time at loop 13 and with my last loop sorted out(thanks to forum member) this would of been easy 6m 15.7-- or maybe 6M 15.6-- Next time :up:
Attachment 131177

back in the days where lower timings where better, and runs would fail instead of being slow when too tight,,,,,, sigh

Quote:

---

Originally Posted by Splave

back in the days where lower timings where better, and runs would fail instead of being slow when too tight,,,,,, sigh

---

Yeah lol,I needed bit of Pi while waiting to get a new Haswell chip

TaPaKaH - 6:16.062 - 50x100 - 1333MHz - 6-9-6-24 - M5F 0701 - 2x2Gb PSC 2.10V - LN2/LN2

http://abload.de/img/copyof5000-616062u5u3b.png

couldn't get a pass with 1360 and CW unless tWCL was 7 or 8

http://abload.de/img/copyof5000-615xxx8zub3.png

Nice sandbagging lol :D

This score is new ;)

P.S. Grats on new #1 spot, very good run