TYROU breaks into the 15.xxx Pi 1M !

Printable View

Show 100 post(s) from this thread on one page

05-03-2006, 04:21 AM
Tyrou

very nice :woot:
05-03-2006, 04:44 AM
VictorWang

Quote:

Originally Posted by Tyrou

very nice :woot:

If 300fsb benchable... maybe break 16min :eek: :woot:
05-03-2006, 05:31 AM
kyosen

Quote:

Originally Posted by Tyrou

Does anyone have saved the Vcca mod pic from kyosen, the image link in the thread is broken, and I'd like to do that mod :)

Sorry, now I've fixed several my posts, and re-post it here:)
<img src="http://222.151.144.54/c-board/file/i975Xa-YDG_Vcca_mod.jpg">
You can check my mods&results also from here...though in Japanese:
http://www.oohashi.jp/c-board/c-boar...ne;no=4333;id=
In the picture above, I had added the 100ohm-VR with original R151(20ohm),
Now I replaced them(=R151 + 100ohm-VR) with 200ohm-VR.
And this mod depends on Vio...higher Vcca needs higher Vio.
Good luck!!!;)
05-03-2006, 06:38 AM
Ekren

:banana::banana::banana::banana:!!
Thats nice!
05-03-2006, 06:50 AM
neoman

Nice work there . :) well done
05-03-2006, 08:28 AM
runmc

Quote:

Originally Posted by Dumo

What temp. in bios after the mod?

Temp read 42 in bios. Probe on evaporator read -105C After I did the mod I was able to get into the bios while chip was freezing.
05-03-2006, 09:30 AM
Santo

gg Tyrou :D

Your Yonah with my 7900GTX EE, we could make anything... ;)
05-03-2006, 02:10 PM
Tyrou

thanks for the mod kyosen :toast:
santo -> it's only a matter of time, come when you want...

I'm pleased to tell you that the CF bug is now fixed :woot: Tomorrow will be a long, long day :D
05-03-2006, 02:46 PM
runmc

What was the problem causing the CF bug??;)
05-03-2006, 08:06 PM
Sesto Sento

Quote:

Originally Posted by Tyrou

thanks for the mod kyosen :toast:
santo -> it's only a matter of time, come when you want...

I'm pleased to tell you that the CF bug is now fixed :woot: Tomorrow will be a long, long day :D

That's some great news :D:D
05-03-2006, 09:22 PM
Jort

ohh yeah baby!!! show us french benchies:D

GG:D
05-03-2006, 09:29 PM
lowfat

Definately waiting for some CF results.
05-03-2006, 09:49 PM
Tyrou

Quote:

Originally Posted by runmc

What was the problem causing the CF bug??;)

Catalyst drivers, and more accurately, every catalyst release until the 6.4. It now works under Windows XP, with the 6.4 :)

6.2/6.3/6.4 + W2K3 : works, but 3DMark05/06 bug
6.2/6.3 + WXP : crashes the OS when the second card is plugged
6.4 + WXP : works fine.
05-03-2006, 09:49 PM
mursaat

Tyrou get up! its 8:45AM :D j/k. We want to see those scores now you've fixed CF hehe. Keep up the good job :)

//EDIT: beaten by seconds :D:D
05-03-2006, 10:49 PM
[cTx]Philosophy

I def wanna follow this
Its gonna be good :P
05-04-2006, 01:57 AM
mursaat

Yay man you're so close to Jason!

I won't spoil you the news... you better post results soon! :D
05-04-2006, 02:00 AM
lowfat

check out his thread in Xtreme 3D. You won't be dissapointed.
05-04-2006, 03:27 AM
cupra

wow, great one tyrou, great chip you have there :toast:

Quote:

Originally Posted by Tyrou

actual vcore was 1.64v

I didn't measure the temps, evap temp is in the -105c range, and this cpus doesn't put out a lot of heat, so -100c @ load is not impossible

the fsb is the limitating factor, the cpu is rock stable @ 3830, but no way to make even a cpuz validation @ 3850 :(

omg, that is a cold, its mean that the cpu is very near to the evap temps :slobber:
05-04-2006, 06:15 PM
georgekh

good stuff

Its amazing to see what these new chips are capable of doing!!!
05-04-2006, 07:44 PM
VictorWang

Quote:

Originally Posted by Tyrou

Catalyst drivers, and more accurately, every catalyst release until the 6.4. It now works under Windows XP, with the 6.4 :)

6.2/6.3/6.4 + W2K3 : works, but 3DMark05/06 bug
6.2/6.3 + WXP : crashes the OS when the second card is plugged
6.4 + WXP : works fine.

i've tried 10more times yesterday , wanna enable CF on 975xa-ydg.
6.4 dd+ccc,
disable "write xxx"
everytime as I plug the 2nd card, system crash or very very slow
05-04-2006, 09:50 PM
Tyrou

yep, write combination is disabled :)

I'm experiencing the same issues, crashes or very slow system :(
05-05-2006, 11:06 PM
Boble76

:toast:

Congrats!

8M next?
05-06-2006, 02:29 AM
dogsx2

Quote:

Originally Posted by VictorWang

i've tried 10more times yesterday , wanna enable CF on 975xa-ydg.
6.4 dd+ccc,
disable "write xxx"
everytime as I plug the 2nd card, system crash or very very slow

I had to reinstall the drivers and then it worked fine.:)
05-06-2006, 02:35 AM
jdam

how in the world do you get that memory clocked so high :P 491Mhz for pc5400 is insane afaik.
05-06-2006, 06:48 AM
VictorWang

Quote:

Originally Posted by Tyrou

yep, write combination is disabled :)

I'm experiencing the same issues, crashes or very slow system :(

I've found the problem.
Do not optimize perfomance for SYSTEM CACHE.
leave it at DEAFULT ( Programme )
CCC cannot start if we do the optimize
that's why the system becomes slower and even crash

Show 100 post(s) from this thread on one page