If ECS would contact there colleagues here in holland about it :cheer: so i hope to get a board soon.
Printable View
If ECS would contact there colleagues here in holland about it :cheer: so i hope to get a board soon.
Hicookie
Those look very thick so that you cannot install four dimms. Cool looking design though. looks like lots of resistors along the connector edge.
ya,4dimm must mod vdimm vol..:(Quote:
Originally Posted by FUGGER
Any info about ECS OC options like max vcore, vdimm, fsb etc. (at least without mods)?
I also would like to know. With that information we know what to expect
sure there is a thread here someware with that ocz ram.
you connect the ram direct to a floppy power connector the copper heatpipe is for the vrm's will post the thread when i find it again.
edit :found it http://www.theinquirer.net/?article=30194
Clever move, Fugger. Could ECS be finding an enthusiast niche? They seem to be willing to bravely go where none have gone before.
Let's not forget who posted the ECS board info here first?
i did a quick comparison image, Dothan vs Yonah pinoutsQuote:
Originally Posted by FUGGER
as You can see, unfortunately pins are completely messed out.. not some of, but almost all of them :(
So, at most, You'll fry this yonah (or mb), nothing else.. :(
Greetings to all,
I am fan of MSI VGA cards. I don’t know much about MSI motherboards. I am sure that the following is OK for general use. For overclocking you will tell.
MSI 945GT Speedster Plus:
http://img55.imageshack.us/img55/896...erplus29ou.jpg
lol @ 2 attachable PCI slots. Yes, 945 are crap for OC
In Germany boards will be availble on 22-03-06 at Atelco.de.
Order the Aopen, or go for another one ?
my exprience.......msi not good at intel base overclocking...
I ordered one, but still hope to get the PF23 soon ;)Quote:
Originally Posted by Gamer
Any news now?
...Quote:
Originally Posted by Rudzer
Aint a i975X, so useless :(Quote:
Originally Posted by Rudzer
I have a new rig running Yonah on XP, cant give details yet.
I will work with Franck on getting a few things fixed for us in preperation of the competition. Im sitting on 955XM chipset, identification problems need to be worked out asap.
Tomorrow I drop in a new chip. CPUID doesnt even start on this mobo.
Is it the Asus N4L-VM DH ? please, just a tiny hint...;)Quote:
Originally Posted by FUGGER
Would be nice to see some boards out there
Duo from Aopen......
http://img452.imageshack.us/img452/5808/aopen10xi.jpg
More specs....http://usa.aopen.com/products/mb/i945GTm-VHL.htm
a simple question: in a aopen i975xa-ydg will work the old pentium m (dothan) or only the core solo/duo? thx
No, Yonah and Dothan are not pin compatable.
They are made so if the mistake is made in the wrong socket the CPU will not fire up and no harm will come to the CPU by design.
I have tested both directions
thx
would an adapter be possible (like what asus made for 865/875), or does yonah not support the 865/875?Quote:
Originally Posted by FUGGER
an adapter is possible, but the problem would be compatable motherboards, just like how an adapter is possible for dothan but most mobos arent compatable with the adapter.