Wow!! That is a badass 1m run kingpin.
Printable View
Wow!! That is a badass 1m run kingpin.
Congrats :)
What are we going to be seeing when you remove the IHS :slobber: , you are going to be removing it, right? :D
Thats really nice!
k|ngp|n do you have fully cooled CPU, or do you starve the pot.
I am askig this cause of cold bug, have encouter it with this proc.
Of course :). Could see 4ghz 3dmark runs and 4030mhz for 2d.Quote:
Originally Posted by mongoled
@zbogorgon:
Thats a great way to put it "starve the pot". You can't just fill the tube and hope for the best. Very controlled ln2 delivery is needed with the cold bugged chips.
i have experienced that just few days ago, but with your results, it could be possible, that your proc doesn't have cold bug until -150 or so. If it is no secret, can you tell us, what temp do you bench at.
Hehee, the timing of you hitting this landmark is perfect for me on a personal level! You have now made the CABNE 0530APMW the most desirable stepping on the whole planet :D, and my CABNE is on sale right now!Quote:
Originally Posted by k|ngp|n
I look forward to your naked results :p:
k|ngp|n
if you are not using fully coled proc, how is it possible, to gain sth with removing IHS, that ususall causes lower temp, but if you are as low as you can get ?
i am just curious :D.
No......Bad chips in the right hands......are through away...Quote:
Originally Posted by kiwi
this chip is totally sick! damn nice!
get a few new Wr :toast:
SO far for this chip when I hit a limit on how cold it can go, I figure out a way past it by doing things such as higher vcore, more load ,etc.Quote:
Originally Posted by zbogorgon
It took about -105c to hit 4gs 1m stable
Logically you would think thats the case but it isn't. Let say an fx with the IHS on can't go any lower than -80c base temps/-42c bios loaded temps without tripping out. Now you take the ihs off and maybe it can now go to -72c base temps/ -42c bios loaded temps because no ihs = same bios temps at warmer base temp. Again you would think that you would gain nothing and still get same max clocks with those same bios temps as before (-42c), but you gain mhz :). I think the ihs gets in the way of the container doing it's thing (especially if not making good contact) and at -42c bios temps with ihs off there is more cooling power/capacity and you get mhz.
I am not telling you to go and remove your ihs because it is risky. I have lost some damn good chips doing it. I will remove mine when the time is right and there is no more left with it on. It is so much easier to mount a big heavy container with it on. Like night and day.
Congrats there Kingpin. Thats too bad to hear about all those probs with your SPI hd. Below 21's on an FX would just be crazy.
thx, it's kinda funny how the things works sometimes in overclocking, and IHS are godly when comes to mounting evaps and containers.Quote:
Originally Posted by k|ngp|n
Congrats k|ngp|n! Incredible.
Just when i thought I had something to match you; you pulled 4GHZ out of your pockets. Truly outstanding!
Just found out all of the FX-57 0530 APMWs are sold out at ebay. :D
SPI @ 4G is totally inhuman. congrats. :toast:
Not really... I have a harder time actually. With an ARC mounting a bare die is dangerous though. very. With a regular hold down it's not that dangerous if you use insulation on the base as a "support" somewhat.Quote:
Originally Posted by zbogorgon
Also, win server 2k3 x64 is best but what about XP x64? I couldn't find a copy of 2k3 x64.
How about 3d at 4ghz? Could happen soon almost there. I have new high score in my 05' project manager ;)Quote:
Originally Posted by formyfaith
http://pic8.picturetrail.com/VOL256/.../125978317.jpg
Still not on solid gpu units..soon.
:eek:
holy :banana::banana::banana::banana:, sweet cpu speed :slobber:
wtg :thumbsup:
Mother of God..
Great Job K|ngP|n.... truly amazing work.
18956 is my bet :banana: thats suck KP!
Holy :banana::banana::banana::banana:...
that is sweet
go go vince , thake amd to a new level :slobber:
:slobber:
18.9k?
He won't stop until 19K :p: