nice!
290 with 1t is def nice, any idea what settings were needed for that?
does the board just hate bh5 for high 1t?
Printable View
nice!
290 with 1t is def nice, any idea what settings were needed for that?
does the board just hate bh5 for high 1t?
Quote:
Originally Posted by althes
Hey what LDT are you running? Im having very little luck running 300htt, no matter what divider I use? or multi? So far it seem I have to run 3x up to about 270ish, and then after that windows is very unstable unless I use the 2x (400mzh) LDT? You having the same symptoms? Also are you running southbridge overvolt? does this help, doesnt seem to help me at all...
Thanks
Anyone know how to check to see if the board is locking the PCI speeds corectly? I am getting alot of crackle from my audigy and wanted to see if that could be a reason
Thats what im thinking. It could explain why my rig can pass prime for 16 hours at 2.6ghz but then crash as soon as i use winamp or my tv tuner, both of which are pci devices. It could also explain why all my internet browsers crash since the LAN runs off the pci bus. Either way this board doesnt live up to the hype in my case.
Hmm, wonder if Sandra Sisoft will list the PCI bus speed?
OK.. Very disappointed so far.. Max stable HTT I can seem to get is around 275mhz... No matter what LDT or what memory divider im running.. With an FX and unlocked multies, i can live with that, BUT heres where Im stuck... I have tried UTT,UCCC, and Micron D modules in this board... All of them no matter what timings, what divider, volts etc they are maxing out around 235mhz?? The Micron did 280 no other boards, my gskill with the samsung are new so not sure what they can do, but I cant even get them to run stock 250mhz at any timings? :mad:
Whats everyone elses memory results so far, how the heck did they pull off 325 in that review? Starting to think more and more they had a cherry picked board.. Anyone found a chipset voltage readpoint? Wonder how much volts are running through it?
this is where i am right now, this is 1:1 but no 1T still.
http://www.xtremesystems.org/forums/...1&d=1135215824
What LDT are you running? southbridge overvolt on or off? Also what ram is that? Nice!! glad to see someone is atleast getting good results.
I am running it at 600Quote:
Originally Posted by Eradicator
I have 2gig of memory to run in it tomorrow some gksill amd twinmoss:p:
Board will run bh5 up to 245 for 2*256 at 1t and up to 235-240 for 1gb at 1t.Quote:
Originally Posted by saaya
The 3.2v is the limiting factor.
Goddamnit.
Funny how those review mobos always do so perfectly :(
LDT is 600, southbridge overvolt is on but i noticed if i set auto next time i enter the bios it sets itself on enabled don't know if it only starts acting like this at a minimum speed, ram is Centon TCCD 507 on B6U808, well, i would call it good results if it would run 1T but i wouldn't call it bad either.Quote:
Originally Posted by Eradicator
Just ordered the board. I'll receive it the 27th due to holidays and such.
I wont settle for anything less than 320HTT bootable! :toast: :D
Anyone have that beta bios, that supposedly hates bh-5? I cannot get my 2 gig set of gskill with UCCC to boot at anything over 225 and if I use A64 tweaker to try to change the divider to put it at 250 or anything over 225 I get instant reboot? But A64tweaker works fine when im at a lower fsb... Want to see if that bios will help..
sure, along with dozens of other features of your system, but its all a guess and not based on reading out your hardware.Quote:
Originally Posted by Eradicator
please uninstall sisoft sandra and forget you ever used it :D
its a really worthless tool, except for the memory bench, and even that only if you run unbuffered...
Ok wierd issue maybe someone can shed some light on here.. 300htt X 10 using the 166 divider my ram is at 250mhz... then using NF4 clockgen to change the multi to 11X and my ram drops to 235 using the same divider... Also verified when using 11X300 with the 166 divider via the bios, i get the same results 235.7mhz? Anyone have an idea of whats going on here?
Oh seems I resolved the UCCC over 235mhz, had to set Read Preamble to 9.5ns and Max Async Latency to 10ns.... these seem kinda high, but dont know whats normal for these modules? Anything less on either is unstable past 235.
Erh. Some math stuff related to the memcontroller... :)Quote:
Originally Posted by Eradicator
Stolen from trans am :D
So 1T works for you now?Quote:
Originally Posted by Eradicator
Nope.. No luck on 1T here either... Something else to note is if I use 1:1 with all the different ram I have tried in this board, I have major pains booting over 230 and when it finally boots keeping things stable is even harder.. As long as I use a divider I do not have this problem..
So far this is my superPI 32M, 3d/benchmark, and a few hours prime stable (need to let it run overnight) max clocks on this board:
http://i3.photobucket.com/albums/y85...newdesktop.jpg
The highest i have had HTT has been 330hz, didnt thouroughly test it for stability though.. 335 with LDT of 2X would not boot..
After a vcore mod and taking some time to play with memory timings/settiings boards not bad.. Hopefully Asus will address some issues in later bios releases like the 1T and maybe add the extra dividers that are in the beta bios... I have not tried the beta bios, cant find anyone that has a copy of it, but I heard it did not play nicely with BH-5/UTT but wonder how it is with CE-6 or UCCC?
bios screenshots?
Is anyone getting higher vcore with the bios going around?
If so can I get it?
The board wont boot with ldt 400.
I will test the other ram today see how it goes.See if my 1t holds
Quote:
Originally Posted by csimon
Well if someone happens to send you that bios could you please pass it onto me?
Thanks
And from what I hear it doesnt help with increased vcore, just gives you some of the extra dividers and some other stuff in the bios.
pft on the vcore ...I really don't want to vmod. I just can't get past this 2650mhz on this opti175 without more volts.Quote:
Originally Posted by Eradicator
I have a few pm's out now and an email to Wes ...it's gonna be rough since it's christmas eve. Mackanz at OCZ has been trying to get me this bios all week. Sure will pass it on though when I get it.;)
What kind of ram are we talking here?Quote:
Originally Posted by althes
ALso the 183 divider does not work for me