Official DFI Lanparty UT RDX200 CF-DR Thread

Printable View

Show 100 post(s) from this thread on one page

07-08-2005, 04:13 PM
xs64

Quote:

Originally Posted by The Mofo

Alot of you guys sure throw in the towel early, jeeezzz

Heres your adapter for 4 pin P4 to 8 Pin...

http://www.xoxide.com/tt-psu-adaptor-cables.html

I highly recommend that DO NOT using any Adapter , they are just suck :fact:
07-08-2005, 04:51 PM
dippyskoodlez

Quote:

Originally Posted by xs64

I highly recommend that DO NOT using any Adapter , they are just suck :fact:

whyso? the 24pin psu adaptor I have works perfectly fine. :nono:
07-08-2005, 05:03 PM
xs64

Quote:

Originally Posted by dippyskoodlez

whyso? the 24pin psu adaptor I have works perfectly fine. :nono:

Oh God , i have one 24pin adaptor and it makes my 5v rail lower at 4.95v ( according from Digital Multimeter ) , without that sucker , my 5v rail = 5.08v :slapass:
07-08-2005, 05:08 PM
dippyskoodlez

Quote:

Originally Posted by xs64

Oh God , i have one 24pin adaptor and it makes my 5v rail lower at 4.95v ( according from Digital Multimeter ) , without that sucker , my 5v rail = 5.08v :slapass:

measuring where? native 24pin psu? I didnt notice a difference when I used mine.

hell, I'm even using a skimpy 350w psu :rolleyes:
07-08-2005, 05:15 PM
xs64

Quote:

Originally Posted by dippyskoodlez

measuring where? native 24pin psu? I didnt notice a difference when I used mine.

hell, I'm even using a skimpy 350w psu :rolleyes:

http://xtremesystems.org/forums/show...631#post777631

edit : Oops , sry , that link is how to measure Vdimm , Vcore ... :D

Measuring the rails of PSU is easy , this link is good to see : ;)
http://forums.extremeoverclocking.co...d.php?t=137886
07-08-2005, 05:28 PM
dippyskoodlez

Quote:

Originally Posted by xs64

http://xtremesystems.org/forums/show...631#post777631

edit : Oops , sry , that link is how to measure Vdimm , Vcore ... :D

Measuring the rails of PSU is easy , this link is good to see : ;)
http://forums.extremeoverclocking.co...d.php?t=137886

I know how to measure my psu... I have a $75 DMM ;) along with a nice set of vmodding supplys.. :p:

was asking where you measured it from.
07-08-2005, 05:34 PM
xs64

Quote:

Originally Posted by dippyskoodlez

I know how to measure my psu... I have a $75 DMM ;) along with a nice set of vmodding supplys.. :p:

was asking where you measured it from.

So we're misunderstabding each other :D
Off course i measure the rail at the Adaptor direct to mainboard plugin , when the power is on
Just a bad picture

http://img201.imageshack.us/img201/7...07522pq.th.jpg
07-08-2005, 05:37 PM
dippyskoodlez

Quote:

Originally Posted by xs64

So we're misunderstabding each other :D
Off course i measure the rail at the Adaptor direct to mainboard plugin , when the power is on
Just a bad picture

http://img201.imageshack.us/img201/7...07522pq.th.jpg

hmm.. strange.. :stick: is it all 18ga wire on that adaptor? an adaptor shouldnt drop the voltage that much :eek:
07-08-2005, 05:40 PM
IvanAndreevich

20->24 pin adaptors are utterly worthless because of the whole point for having 24 pins :)
07-08-2005, 05:41 PM
xs64

Quote:

Originally Posted by dippyskoodlez

hmm.. strange.. :stick: is it all 18ga wire on that adaptor? an adaptor shouldnt drop the voltage that much :eek:

You know , at first i have used the adaptor and my BH5 can run @ 270 3.6v , but 275 is no go .
So i checked my Rails , 4.95v in 5v rail is nightmare , so decided to put out the Adaptor and checked again , it was 5.08v :woot:

After all , i can bench at 281 3.7v and stable at 275 3.6v , the rails are rock without the adaptor :banana:

And my PSU is a Enermax 465 460W
07-08-2005, 05:46 PM
dippyskoodlez

Quote:

Originally Posted by xs64

You know , at first i have used the adaptor and my BH5 can run @ 270 3.6v , but 275 is no go .
So i checked my Rails , 4.95v in 5v rail is nightmare , so decided to put out the Adaptor and checked again , it was 5.08v :woot:

After all , i can bench at 281 3.7v and stable at 275 3.6v , the rails are rock without the adaptor :banana:

And my PSU is a Enermax 465 460W

running 20 pin I couldnt install windows for nothin. using the adaptor, and my custom hard mod, I can run perfectly fine.. my rails never changed :confused: my max oc doesnt change a bit wether I run 20 or 24 pins, but using 20 windows craps out in the install... after install tho.. it runs perfectly fine :stick:
07-08-2005, 06:15 PM
IvanAndreevich

and my custom hard mod
Link to that? That's what makes it useful
07-08-2005, 06:20 PM
PicaXuu

Any news about the new revision of NF4 SLI-DR ???
07-08-2005, 06:28 PM
dippyskoodlez

Quote:

Originally Posted by IvanAndreevich

and my custom hard mod
Link to that? That's what makes it useful

http://tinypic.com/6yihdk.jpg
I'll be writing an in-depth article on how its done with better pictures as soon as I get a camera ;)
07-08-2005, 10:36 PM
IvanAndreevich

Ok, that's different from a useless adaptor :p
07-14-2005, 05:06 PM
Doumz

Can't wait to see this board review................

hope it will be rock stable and too buggy like the nf4..........

Always been fan of Nvidia,but i may change for once ;p
07-14-2005, 09:20 PM
IvanAndreevich

Talked to ATi rep at AMD tour today.. he said Crossfire will be out middle of August. DFI & Gigabyte boards to be the first out. Sapphire to follow soon after ;)
07-15-2005, 05:23 AM
LowRun

He, finaly the waiting game will eventualy payback with lots of new hardware to be released in August/September (ATI mobos, R520, cheap AMD dual core, Creative's X-Fi wich should set a new landmark in PC sound).
Bob was right!!!
"Good things come to those who wait" :hehe:
07-15-2005, 05:24 AM
rsGTS

hey Ivan, you have any linkie to confirm that? I want a Grouper board really bad, but now that the Abit AN8 Ultra is out in US I am seriously thinking of getting it so I can finish system. I would rather go ATI if possible though, but I have been waiting patiently for like 3 months now ;-) If it will only be another month i can wait, and then go X2 at the same time with the extra time to save up =P
07-15-2005, 03:05 PM
IvanAndreevich

No linkie, it was an oral conversation in person. DFI should definitely hit the streets at crossfire launch in mid august.
07-15-2005, 03:44 PM
187(V)URD@

Quote:

Originally Posted by xs64

You know , at first i have used the adaptor and my BH5 can run @ 270 3.6v , but 275 is no go .
So i checked my Rails , 4.95v in 5v rail is nightmare , so decided to put out the Adaptor and checked again , it was 5.08v :woot:

After all , i can bench at 281 3.7v and stable at 275 3.6v , the rails are rock without the adaptor :banana:

And my PSU is a Enermax 465 460W

So you used the +5V jumper with your 20pin psu without the adapter?
Didn't know its safe, if you did i'll give it also a try :)
07-15-2005, 08:32 PM
eva2000

Quote:

Originally Posted by babalouj

yes, i have one and it has the 8 pin connector

you sure ? my 510W PC Powercooling SLI psu doesn't have one nor does the web site specs

http://www.pcpowercooling.com/produc...iag_T51SLI.gif
07-15-2005, 09:33 PM
situman

yup got the same pcpc 510 sli. I aint giving this baby up only cause a mobo manuf decides everyone should get a new psu if they want to play with their boards. If the board requires an 8pin im going to plug in an 8pin, not a 4pin and risk stability.
07-15-2005, 09:37 PM
eva2000

Quote:

Originally Posted by situman

yup got the same pcpc 510 sli. I aint giving this baby up only cause a mobo manuf decides everyone should get a new psu if they want to play with their boards. If the board requires an 8pin im going to plug in an 8pin, not a 4pin and risk stability.

so yours have 8pin connector ?
07-16-2005, 06:17 AM
situman

nope. o nly the four pin like yours. If this board does come out with the 8pin it would get mighty expensive to do a conversion.

Show 100 post(s) from this thread on one page