Alphaone, thanks again for your help. Unfortunately there were no breakthrough with these settings.Quote:
Originally Posted by alpha0ne
Printable View
Alphaone, thanks again for your help. Unfortunately there were no breakthrough with these settings.Quote:
Originally Posted by alpha0ne
Sorry m8, settings are different from board to board and CPU so only way is keep trying :)
is there a store where you can pick your steppings?
2700mhz prime stable @ 1.5vcore on crappy air. Might get it down to 1.475 if I tried. Haven't tried between 1.425 and 1.5 yet. 1.425 gets ~ 2600mhz.
week 20 FPBW
1200+ batch code
hey guys i recently just bought a 3000 venice with this stepping
LBBLE 0520CPMW
NOW I own a week 16 that and im getting 2.6 ghz with hyper 6 100% prime 95 stable with 1.5 v..
so i will appreciate if someone can tell me or have test this stepping, cause if isnt good i probably sell it ( is still sealed in box hehe)
so if anyone having luck with this stepping
please post :toast:
I've got:
LBBLE 0520 EPMW (amd 3000+)
Prime stable for 1 hour @ 2808 mhz @ 1.47 vcore (312x9)
Quote:
Originally Posted by Xiled
wow thats a nice stepping dude, guess if you aply 1.52 v you will get it stabilized for 24/7.. wich cooling method are you using???
hope my CPMW can get close to that... :D
congrats dude nice processor you got there :toast:
Hey guys, i have the same CPU as alphaOne! Would you consider it stable if it can run 3dmark03 and SP32m and not prime ? Prime fails in 5 mins @ 270x10 @ 1.48 but will run 24/7 @ 267x10 @ 1.48. Should i push more juice through this chip ? thanks.
- Michael.
No. Stable means it runs as flawlessly as if it were @ stock.
My chip does the same plus Prime @ 1.52 Vcore 10x2800 24/7 BUT I have found after playing Colin McRae Rally '05 for ~ 1 hour can make it not 100% stable, though only occasionally, so I use 1.536 Vcore for intensive gaming :DQuote:
Originally Posted by bobbobson
You should bump up your Vcore to 1.52v if not 100% stable as the difference is minimal, just make sure you always have adequate cooling and the extra 3% Vcore will do no harm :)
I'm using a cheap aircooler (9 euro :stick: )Quote:
Originally Posted by FiNcH64
Yep those epmw's are pretty good, a other guy on got.tweakers.net got the same stepping and he got almost the same result as me ;)
what about week 24/25 ?
How would we or anyone else know ??, its a new stepping, so why dont you see what it will do and then tell us so that we know :)Quote:
Originally Posted by ReelMonza
My week 24 performs about on par with my old week 16. ~ 2700 max stable, 2600 is where it starts chewing up vcore to get gains.
I hope that's not its max lol. Keep pushing her. DPMW is a good stepping.Quote:
Originally Posted by Swuacheneger
Just got mine yesterday and I have to admit that it kicks @ss compared to toasted CBBID Winnie. Memory controller also kicks @ss, It will only work with tightest timings, good for BH-5, Winbond etc., but I'm on TCC5. This chip needs a lot of tweaking when it comes to latencies, if you will loosen anything up it will error out :confused. I'm very new to DFI, Venice but I tweaked my memory for 3h to DRR650 mem86 stable with same timings and crazy 3.0v+ RAM voltage. Definitely more to come: Believe this just beggining: screenie :p:
System:
Venice 3000+ LBBLE 0520 APMW, Retail bought at newegg 07-31-05
DFi NF4 SLI-DR, 623-3 BIOS
Thermaltake Venus12 CPU Cooler at ~5000RPM + AS5
OCZ PowerStream 520W
OCZ PC3200 Rev.2 TCC5, DRR612 ~2.77v
Win x64 stable :woot:
http://www.xtremesystems.org/forums/...id=35343&stc=1
More to come from Venice for sure, RAM starts to cap out :slapass:
I tried a 3000+ LBBLE 0521 GPAW. It was nothing special. Required 1.5V to do 2.4GHz and maxed out at 2.5GHz in my DFI Ultra D