Venice, Stepping and Oc Database

Printable View

Show 100 post(s) from this thread on one page

05-26-2005, 11:32 AM
TEDY

geeze

04/14-3

300*9 not even 1.475/1.5/1.525v

am i doing something wrong here ?
05-26-2005, 11:41 AM
dave164

Ive got "LBBLE0517GPHW", never heard of this GPHW before
05-26-2005, 11:50 AM
2||Para

Hi people! first post :D

Somebody recommend me some new RAM to replace this please.

http://img197.echo.cx/img197/6324/cg5wo.png

Wont go much higher even on a divider and lower multi. Budget is £150/$300

Thanks
05-26-2005, 03:14 PM
faruquehabib

1 Attachment(s)

ok, this is in my shuttle SN95G5 Nforce 3 ultra chipset xpc...HTT maxes out at 280 in bios, and i needed a divider on my crappy ram, but....

Venice 3000+ retail from newegg

LBBLE 0515FPDW

motherboard is definitely holding this cpu back, no doubt. if i could raise HTT higher (maybe with clockgen i can) i bet it will go higher. rig is silent as well...

EDIT: here is the link to my validation screen:

http://valid.x86-secret.com/show_oc?id=19844
05-26-2005, 04:07 PM
BadlyDrawnBoy

Clockgen will let you go above 280 with the SN95G5.
05-26-2005, 04:14 PM
faruquehabib

Quote:

Originally Posted by BadlyDrawnBoy

Clockgen will let you go above 280 with the SN95G5.

i hit 300 with clockgen with stock voltage and then 30 sec. later it reboot. i will try again later with more vcore.
05-26-2005, 04:18 PM
coop

I got a new stepping, 3500 LBBLE 0517 APOW. Just set it up and ran a couple 1m pi. Running at 2.6@1.37v and 29C. I wish the temp would stay down there when it gets a little voltage. I have pic when I get on other comp. Also got a 3500 LBBLE 0515 FPAW. Have not tried yet.
05-26-2005, 04:29 PM
gocchin

3200+ 0517BPDW
2700mhz 10x270 @ 1.36v air cooled XP-90 2-2-2-5

http://www.jpop.com/gocchin/venice2700.JPG
05-26-2005, 05:55 PM
alpha0ne

these new Venice cores (IF I could get a good one) are really starting to tempt me away from my beloved 2.8c M0
05-26-2005, 07:08 PM
SET

Apparently the 0517 make very good work. It is at least much improves that my 0516EPEW that does 2.8@1.75v.

Somebody knows of where are dispatching the new weeks but in U.S.?

Thanks
05-26-2005, 07:14 PM
TheMeatFrog

I think I'll drop by Monarch tomorrow and see if they are still on the 0516s or if they have moved on to the 0517s :)
05-26-2005, 09:01 PM
TEDY

is it heat my problem i can't get it to run 300*9 ?

i have zalman 7000b alcu

i can run it easily 280*9 at 1.375v
05-26-2005, 10:42 PM
alpha0ne

Quote:

Originally Posted by TEDY

is it heat my problem i can't get it to run 300*9 ?

i have zalman 7000b alcu

i can run it easily 280*9 at 1.375v

I am no expert regarding Venice but your cooler is certainly not classified as being "high end" such as the Thermalright XP90 or XP120 :)
05-27-2005, 03:27 AM
TEDY

i know :P but my old winnie did ran 300*9 at 1.55v just fine :)
05-27-2005, 03:43 AM
dave164

So no one knows anything about my GPHW? I dont have a clue what this can do and i see everyone with differnt ones..

I might sell and get a better stepping one?

Ill wait to make my conclusion next wek when my PC4000 arrives...
05-27-2005, 05:03 AM
RafaDel

Hey Sobo, nice work to put this list together. Now how about to sort this out by stepping AND week so we can see the progress of new batches...
05-27-2005, 05:34 AM
sobol

Aint problem for me, i have such sortings in docs but i though that public 3 differ sorting will be big flood,especialy that the list is large now and might be eaven bigger.
05-27-2005, 05:36 AM
TEDY

Flashed to 5/10-3.

So far 285*9 at only 1.35v (1.31v windows)...I know just set 300 and try....well i'm the kinda guy which progresses step by step......next 290...295...etc...hehe
05-27-2005, 05:53 AM
faruquehabib

1 Attachment(s)

update on my LBBLE 0515FPDW

300HTT at 1.4 volts ran 3dmark and superpr and about to run prime95 with aquamark...

validation:

http://valid.x86-secret.com/show_oc?id=19909
05-27-2005, 06:12 AM
TEDY

please post voltage as set in bios not in windows....all mobos undervolts...please put into consideration :=)
05-27-2005, 06:14 AM
Napoleonic

so where is the right volt? BIOS or softwares?
05-27-2005, 06:35 AM
faruquehabib

Quote:

Originally Posted by TEDY

please post voltage as set in bios not in windows....all mobos undervolts...please put into consideration :=)

well, i left the voltage at stock in BIOS (3.5 vcore) and raised it using clockgen. my rig is stable so far at 280HTT with stock voltage. i raised it by .5 volts in clockgen, so i assume it is at 1.4 vcore, but i can raise it in bios instead later when i decide to reboot.
05-27-2005, 06:39 AM
TEDY

that makes sense then :)

yupiiiiiiiiiiiiiiiii

290*9 works now at 1.375 bios...1.32 windows :woot:

damn 04/14-3 ... :toast: viva 05/15-3 :toast:
05-27-2005, 06:53 AM
Th3__W00T_GuY__

ok guys, I'm getting the CBBLE 0512DPBW one^^ i'll post my results when i get my 2x512 OCZ el platinum rec.2 from RMA!
05-27-2005, 07:11 AM
Dani

I bought two week17 3200+ Venice today:

- LBBLE 0517BPDW 0963
- LBBLE 0517BPEW 0057

I set BPEW under Zalman 7700cu and first boot to the CPU@251*10 1.4Vcore and straight to StressPrime2004 :D

- 3200+@2510MHz, did 24min and then I went to job...
If everything is ok, SP2004 should be working on 5h30m now

Show 100 post(s) from this thread on one page

All times are GMT -8. The time now is 01:19 AM.

XtremeSystems