DFI NF4 Ultra/SLi-D BUGS and Fixes Thread

Printable View

Show 100 post(s) from this thread on one page

02-07-2005, 01:35 PM
HARDCORECLOCKER

Quote:

Originally Posted by uranium

You'll be fine HCC :)

Have you got your waterblock yet?

:toast:
Geoff

:D No, the board has been shipped today and will arrive Wednesday, I hope to get the waterblock also in time........ :toast:
02-07-2005, 02:05 PM
Zac89

My sticks of VX are going worse and worse... :brick: :brick: :brick:

Yesterday night they pass 720 loop of memtest #5, today they have some errors @260...

Maybe the memory controller of my winchester is going to burn??? :confused:

(sorry for my bad english...)
02-07-2005, 02:31 PM
uranium

Quote:

Originally Posted by xgman

Hmm, 1.55vcore at almost 3 gighz? Nice work!

I have the 24pin plus the molex plugged in near the chipset.

Do you think the Molex is important? You've been at this sort of thing longer than I have....

I just tried 2.5 3 3 8. No go even at 3.1 volts. Lots of errors in Memtest. Then no post on return to previous settings :mad: But I fixed eventually, several CMOS clears + a battery removal later :)
02-07-2005, 03:13 PM
Blue078

Quote:

Originally Posted by uranium

Do you think the Molex is important? You've been at this sort of thing longer than I have....

I just tried 2.5 3 3 8. No go even at 3.1 volts. Lots of errors in Memtest. Then no post on return to previous settings :mad: But I fixed eventually, several CMOS clears + a battery removal later :)

So you haveing trouble with OCZ TCCD's??
I thought my TCCD problem might only be because I PDP mem with TCCD's..humm
02-07-2005, 03:25 PM
uranium

Quote:

Originally Posted by Blue078

So you haveing trouble with OCZ TCCD's??
I thought my TCCD problem might only be because I PDP mem with TCCD's..humm

Not at 2.5 3 4 7 - see post 143 ;)
02-07-2005, 03:29 PM
flutie98

hmm hopefully my new Gskill TCCD will play nice with this board
02-07-2005, 04:15 PM
ENGiN

hy guys, im new here :toast:

I have veryy stupid driver/hardware problem.....

if I a program to start want and it double-click have I a delay of 1-2sek or I must around a program to start sometimes want 3-4 times on it to click

i installed usb 2.0 driver but not help ... :confused:

pleeease pleeeeeeeeeeeease help me :(
02-07-2005, 05:54 PM
apu673

Is there anyway to update BIOS through windows with this motherboard? (don't have a floppy drive)
02-07-2005, 06:32 PM
flutie98

Quote:

Originally Posted by apu673

Is there anyway to update BIOS through windows with this motherboard? (don't have a floppy drive)

yep, winflash
02-07-2005, 06:37 PM
flexy

Quote:

Originally Posted by apu673

Ok, small update. Slots 1 and 2 beep once, but then wont get past DFI logo (3 out of 4 Diagnostic LEDs). Slots 3 and 4 won't post at all and has long continous beeps. I've tried (512mb)Corsair BH-6 as well as my (256mb)GSkill TCCD. I have no idea what to do now, i've played musical chairs with all the dimms and cleared CMOS several times!

RTFM :)

for dual channel use Slot 2 and 4, (OR, but might be flakey) Slot 1 and 3
Slot 2 and 4 are the orange/reddish ones. (not yellow)

Put ONE dimm only in Slot 2

---> NO slots 1 and 2 and NOT slots 3 and 4

Please read the manual its in there and this is essential.
02-07-2005, 06:38 PM
flexy

Quote:

Originally Posted by apu673

I had my 2x256mb in slots 2 and 4 at first. Then I tried just one dimm in slot 2, still no luck getting past Logo.

sry..just read that later after i replied :)
02-07-2005, 07:21 PM
coldcase

What do you guys use to flash the board to the new beta bios if it doesn't post because of the tccd memory issue? I'm suppose to get an Ultra-D this week and I have 2 X 512 OCZ 3200 plat. rev.2. Thanks.
02-07-2005, 07:37 PM
Awperator

Quote:

Originally Posted by coldcase

What do you guys use to flash the board to the new beta bios if it doesn't post because of the tccd memory issue? I'm suppose to get an Ultra-D this week and I have 2 X 512 OCZ 3200 plat. rev.2. Thanks.

Use winflash. Do a google search. First hit. Very easy and intuitive.

- Awperator
02-07-2005, 07:59 PM
quicksilverXP

I'm using the Feb. 1 bios... it is the best... look here...
http://www.xtremesystems.org/forums/...ad.php?t=52557
02-07-2005, 10:38 PM
coldcase

Quote:

Originally Posted by Awperator

Use winflash. Do a google search. First hit. Very easy and intuitive.

- Awperator

Thanks but isn't Winflash a windows program? If you can't boot you need to flash before windows gets installed no?
02-08-2005, 12:41 AM
pudds

It boots with one stick of memory just not two. Boot with one,flash,unplu,rest cmos, install 2nd.
02-08-2005, 12:57 AM
coldcase

Quote:

Originally Posted by pudds

It boots with one stick of memory just not two. Boot with one,flash,unplu,rest cmos, install 2nd.

So you actually boot and need to install windows with one stick then flash, clear cmos and install the 2nd stick?
02-08-2005, 03:35 AM
psycho303

Quote:

Originally Posted by xgman

Mine is a pre-release version board (r.pr32). my specs are in my sig, but I already sent it back for a retail release that they are overnighting me, but at least my tccd sticks worked up to 300htt on the sample board. Now I am worried that the reatail board won't work as well.

i got the thing to run ! sounds stupid , but my "anubis / typhoon" usb 2.0 hub was it ! just changed with "cytronix" 2.0 hub and no more problems, except when you turn on usb devices during power on machine it hangs, can live with this :D

just one problem left with VX/BH5 @ high voltages :rolleyes:

i love this board more & more :banana:
02-08-2005, 04:18 AM
Enz0

I posted this once to DFI-STREET.COM but Angry_Games replied like this.

Quote:

Originally Posted by Angry_Games

you probably have a better chance of getting an answer from him at xtreme forums than I do lol

i cant answer because i have only had my hands on a single 939 board (the nf4 sli)

So, I post it here too.

My friend CIMA did this amazing thing.
http://blog.livedoor.jp/cima/0dbd7629.png
M/B:LANPartyUT NF4 Ultra-D
BIOS:201
CPU:Athlon 64 3200+ CBBID 0441MPMW
CPU Cooling:XP-90
Memory:TwinMOS PC3200 BH-6 256MB x2
VGA?ATI XPERT 98 PCI 8MB
HDD?MAXTOR 6Y80P0
PowerSuplly?Zippy-460WS
Vcore:1.51V / Vdimm:3.80V / Vio:3.46V
OS:Windows Server 2003

But, when he sets Trtw to 1, it maxes out at memory clock of 250 or so whatever Vdimm is.
With other boards, like Epox EP-9NDA3+, we can reach higher memory clock with Trtw 1.
Like this (By my friend New Beetle).
http://cal930.sakura.ne.jp/cgi-bin/c...57S_DDR333.gif

Could someone ask Oskar what's going on?
02-08-2005, 04:23 AM
ominae

Quote:

Originally Posted by uranium

Not at 2.5 3 4 7 - see post 143 ;)

hehe, i've got same RAM as you - I'm stuck at 290 (haven't tried 295 like you) it can't seem get it stable at 300HT, I tried OPB's settings, still no go, any setting suggestions? WE GOTTA MAKE THIS RAM >= 300! :D
02-08-2005, 04:34 AM
uranium

Quote:

Originally Posted by ominae

hehe, i've got same RAM as you - I'm stuck at 290 (haven't tried 295 like you) it can't seem get it stable at 300HT, I tried OPB's settings, still no go, any setting suggestions? WE GOTTA MAKE THIS RAM >= 300! :D

I'll have a play later- at work at the mo ;)
02-08-2005, 04:48 AM
ENGiN

Quote:

Originally Posted by ENGiN

hy guys, im new here :toast:

I have veryy stupid driver/hardware problem.....

if I a program to start want and it double-click have I a delay of 1-2sek or I must around a program to start sometimes want 3-4 times on it to click

i installed usb 2.0 driver but not help ... :confused:

pleeease pleeeeeeeeeeeease help me :(

:( need help
02-08-2005, 04:48 AM
Orker

Im having soooo many issues with CSS and SLI.... anyone else??
02-08-2005, 06:06 AM
Nube

DFI Website down at moment,, butU can download the bios here...

http://www.ricco.karoo.net/down/

I'm a nube yeh,, got new hdd's and win xp pro,,
To flash the bios to the latest bios,, I just put the 2 bios files
(NF4LD201) & (AWDFLASH) on a floppy

start dos mode, and type "NF4LD201" to flash bios ? do i need 2 make floppy bootable some how ?
then shutdown, and install XP?
02-08-2005, 06:11 AM
Nube

test sig

Show 100 post(s) from this thread on one page