There it is! BH-5 is back again!

Printable View

Show 100 post(s) from this thread on one page

02-22-2005, 05:29 PM
Sentential

Quote:

Originally Posted by stevemedes

Sent, can u point me in the right direction of which to get? I'm thinkin of goin with either the 256meg or 512meg sticks of twinmos SP... they seem to be out of stock though.

If you want the best shot it would be any of the PC3200. The pure infineon garbage wont do PC3200 speeds with any sort of tight timing.

from what im told 4-4-4 is typical for Infineon based stuff, ie the PC2700
02-22-2005, 05:34 PM
stevemedes

So even though this stick of 512 has the MTEC chips, theres still a decent chance its UTT? just wanna 2x check before I order. I'm a noob to the A64 platform. Not used to being so picky about RAM lol.
02-22-2005, 05:37 PM
Sentential

Its possible that is UTT, however THIS:
http://www.newegg.com/app/ViewProduc...218-062&depa=1

IS utt. Hell just look at the reviews ;)
02-22-2005, 05:40 PM
esdee

Quote:

Originally Posted by Sentential

Its possible that is UTT, however THIS:
http://www.newegg.com/app/ViewProduc...218-062&depa=1

IS utt. Hell just look at the reviews ;)

lol
02-22-2005, 05:45 PM
jinu117

Is it? Haven't bothered, my 2nd and 3rd rig is using this memory due to cheap cost :P Gotta take some time to play with it later. :)
02-22-2005, 05:46 PM
Sentential

Quote:

Originally Posted by esdee

lol

:doh:I had meant that it is possible that the PC2700 is real UTT, however the PC3200 GB pack is.
02-22-2005, 05:48 PM
stevemedes

I bit the bullet and ordered the 1gb kit that Sent recommended. I doubt I'll regret it. Thanks for the help.

When I get my system all set up I'll post my results.
02-22-2005, 05:50 PM
Sentential

Quote:

Originally Posted by stevemedes

I bit the bullet and ordered the 1gb kit that Sent recommended. I doubt I'll regret it. Thanks for the help.

When I get my system all set up I'll post my results.

Not a problem. In a couple hours / tommorow Ill have those serials you guys have been chomping at the bits to get.
02-22-2005, 06:15 PM
Shroomalistic

I dont think you'll regret it. thats what I got and it works great. HAHAHa that one of those reviews on newegg are mine.
02-22-2005, 06:15 PM
stevemedes

AFAIK, the Chaintech VNF3-250 mobo im getting only allows up to like 2.8vdimm. These UTT chips like much higher voltage than this correct? If true, can someone point me to a Vdimm mod that works (or someone they know who did it and it worked.) I have relatively limited soldering skills. All i've really done was make my own baybus. Hopefully this should be enuff soldering knowledge to get this mod done, cause I wanna o/c the hell outta my system. :banana:
02-22-2005, 06:18 PM
Magnj

so these UTT chips are good for DFI NF4?
02-22-2005, 06:26 PM
vapb400

Quote:

Originally Posted by stevemedes

AFAIK, the Chaintech VNF3-250 mobo im getting only allows up to like 2.8vdimm. These UTT chips like much higher voltage than this correct? If true, can someone point me to a Vdimm mod that works (or someone they know who did it and it worked.) I have relatively limited soldering skills. All i've really done was make my own baybus. Hopefully this should be enuff soldering knowledge to get this mod done, cause I wanna o/c the hell outta my system. :banana:

http://forums.techpowerup.com/showthread.php?t=129
Im gonna be doing that in the next few weekends, whenever I have time to my VNF3-250
02-22-2005, 06:37 PM
kryptobs2000

Quote:

Originally Posted by Magnj

so these UTT chips are good for DFI NF4?

;) ;)
02-22-2005, 06:50 PM
Sentential

UTT works well in just about any AMD board....which remids me I outta ask this person what the deal is with the compatability issues on Intel.
02-22-2005, 07:04 PM
kryptobs2000

I havn't heard of any bh5 (or utt) problems with intel, only tccd problems.
02-22-2005, 07:23 PM
Rabbi_NZ

Quote:

Originally Posted by kryptobs2000

I havn't heard of any bh5 (or utt) problems with intel, only tccd problems.

They exist for sure.
Some boards have the timing options to get UTT working, but those that dont have enough tweaking options simply wont play
02-22-2005, 10:44 PM
jinu117

Friendly word of warning on the memory from newegg... 4 sticks I have doesn't behave well at all... It definitely is not for low timing etc. I am wondering if there were different revisions of this memory, etc. I believe I got these 4 sticks about a month ago or so. (same part# etc though).
Still cheap memory for my 2nd and 3rd rig :)
02-23-2005, 03:38 AM
Sentential

Quote:

Originally Posted by kryptobs2000

I havn't heard of any bh5 (or utt) problems with intel, only tccd problems.

Ive actually seen and heard the opposite. If anything TCCD does perfectally fine in Intel. Granted it doesnt clock as high for chipset reasons but hey it gets teh job done.
02-23-2005, 05:03 AM
The Stilt

Just ordered 30GB´s of this 1A4T stuff from TwinMos europe (via distributor) :D
ETA less than two weeks.
02-23-2005, 05:13 AM
VoRtAn_MaDgE

Quote:

Originally Posted by The Stilt

Just ordered 30GB´s of this 1A4T stuff from TwinMos europe (via distributor) :D
ETA less than two weeks.

OMFG :owned:

Damn you gonna swimm in memories :D
02-23-2005, 05:28 AM
The Stilt

Quote:

Originally Posted by VoRtAn_MaDgE

OMFG :owned:

Damn you gonna swimm in memories :D

Nope, we have sold over 150GB´s of TwinMos UTT sticks in less than two months, so I don´t have enough time to swimm in them before they´re gone :D

**Waiting for "reseller of the year" award to arrive from TwinMos**
'Wink' Alonso 'Wink' ;)

I´m dying to see if the new process (0.175µ -> 0.15µ) brings any increase in overclockability of these new BH-5 chips.
02-23-2005, 05:32 AM
Sentential

Quote:

Originally Posted by The Stilt

Nope, we have sold over 150GB´s of TwinMos UTT sticks in less than two months, so I don´t have enough time to swimm in them before they´re gone :D

**Waiting for "reseller of the year" award to arrive from TwinMos**
'Wink' Alonso 'Wink' ;)

I´m dying to see if the new process (0.175µ -> 0.15µ) brings any increase in overclockability of these new BH-5 chips.

They are building em on a new process now? Hmmm maybe I should get a set.
02-23-2005, 05:37 AM
Magnj

i wanna buy my stuff from the egg but all i hear are bad reviews about the overclocking-bility of theirs products ( CPU's and now RAM) whats a good retailer Monarch?
02-23-2005, 05:37 AM
esdee

Quote:

Originally Posted by Sentential

:doh:I had meant that it is possible that the PC2700 is real UTT, however the PC3200 GB pack is.

the lol was about the reviews ;)

@the_stilt
damn the_stilt :D ... what happend to all those UTT anyway!?!?
02-23-2005, 05:41 AM
The Stilt

Quote:

Originally Posted by esdee

the lol was about the reviews ;)

@the_stilt
damn the_stilt :D ... what happend to all those UTT anyway!?!?

Sold them :D

Show 100 post(s) from this thread on one page