Printable View
@amrgb
If you don't mind, I'll wait for next screenies. What I need to be on the screenshot are: SuperPi window, A64Tweaker and 2 instances of CPU-Z (CPU and Memory Tabs). On both CPU-Z windows, version (e.g 1.28.6 or 1.29) should be visible. Thanks!
OK, just fine for me (and you save some work :) )
I guess that I have to increase my screen resolution in order to get all that in one screenshot :p:
I will try my best for the first place. 301 @ 2.5-3-3-7 (keep on dreaming, it pays no tax... yet :D )
Here are some TCC5 results, I think I got everything I need in the SS, if not let me know and I can rerun the 32M. Using BIOS 0510-3 and the gear in my sig.
DDR 614 @ 2.5-4-3-5, 3.04v (DMM).
This is 24/7 stable. I can squeeze a few more Mhz if I loosen timings more but its not worth the performance loss IMO.
http://members.shaw.ca/Eldonko/306-2.JPG
I don't see many posts with trcd of 3, so I thought I would post one. 10x270 2.5-3-3-8. I can run 3dmark, pcmark, sandra, up to 8m pass of super-pi 10x280 2.5-3-3-8, just can't get 32m to pass.
@bachus_anonym
You can now create an entry with my score. I think that I could do a little better, but it will take me much more effort than to get this one.
Score: 2.5-3-3-6@296 1T 1:1 2.9v
Memory: G.Skill 4400 LE, TCCD 440
CPU: 3500 Whinchester @ 2367 (296x8)
Board: DFI NF4 Ultra-D
http://img39.echo.cx/img39/226/29621dh.th.jpg
PS: I can put this sticks to work (flawlessly) with CAS 1.5 @ 200-205 2.6v. Is this a common result for TCCD? I thought that TCCD couldn't do CAS 1.5 :p:
EDIT: bios 510-2
I was hoping more of you would list the BIOS revision that you're using to achieve such clock speed. Anyone here have a general consensus on what BIOS revision to use besides 3.10P?
Here's some OCZ EL PC3200 Platinum rev2, results on their newer version 1.1 [TCC5]...
Quote:
Originally Posted by bachus_anonym
Didn't noticed it till saw this...mine is the GKILL PC4800 512LA 2x256MB, not Centon or Gemini....never heard of those before :lol: :D ;)
here my geil ultra x :)
its not the max ists my allday setting :D
http://img153.echo.cx/img153/5631/dsc002527kq.jpg
I've flashed from 510-3 to 510-2 and gain 1MHz with a little bit better alpha timings :D
2x512MB G.Skill PC 4400LE (437 chips)
http://picserver.student.utwente.nl/.../picserver.gif
Update :D
TCCD 2x512MB DDR636 Super PI 32M stable
Corsair 3200XLPT Rev 1.2 /346mhz@3-4-4-8-1T/Vdimm 2.8v
DFI Lanparty NF4-D / bios 310
Venice 3200+ (LBBLE 0515 GPBW)
Air cooling / Coolermaster Hyper6
DDR692 32m pass :D :D
Shown as bellow screenie. :)
Test Rig:
- AMD A64 San Diego 3700+
- G.Skill F1-4800DSU2-1GBFF, DDR600 @ 5-3-3-2.5-1T
- OCZ Powerstream 520
- XP-90C + Vantec Tornado 38T 92mm
All valid entries have been added!
@KenLau
:welcome: to XS, man! Oustanding clocks there :slobber: :toast:
abit an8 sli
gskill 2x256mb f1 la
I have another screenie of 330mhz but with looser timings if you want it
http://members.cox.net/italygirl25/tccd%20325.bmp
heres the screenie of super pi bachus. had to drop down to 300mhz as i have a bunk memory controller on this 3500 claw however if you would like i can loop memtest for 24 hours and snap a shot of it for tccd at 325mhz stable.
http://members.cox.net/italygirl25/super%20pi.bmp
Howdy bachus and others !
Results below with 2 x 512 MB PDP Patriot XBLK at DDR580 2.5-3-3-8 w/ CPU speed = 9 x 290 MHz, vdimm @ 2.7V.
http://img41.echo.cx/img41/1126/x9h2...all24wk.th.png
CPU-Z validation here:
http://valid.x86-secret.com/show_oc?id=24289
Hi @ All !!! So this is my first post in here!
When I made my system, based on S939, I've been trying from the very beginning to overclock it 1:1 and this is what I've managed so far with
my A-DATA DDR566 sticks. Normally they do @283MHz with 3-4-4-8,
I succeeded stable use @285MHz with 2,5-4-3-7.
I'm gonna try in the future to push the system a little bit further :)
What do you think of the results? If you have any suggestions tell me please.
The settings I use in Genie BIOS are the following:
Tcl........2.5
Trcd......4
Tras......7
Trp........3
Trc........9
Trfc......14
Trrd.......3
Twr.......2
Twtr......2
Trwt......2
Tref.......3072
Twcl......Auto
Interleave............Enabled
DQS Control..........Increased
DQS Value............255
Drive Strength.......7
Data Strength.......2
Max Async............8
Read Preamble.......5
IdleCycle Limit.......256
Dyn.Counter..........Enabled
R/W Queue Bypass.16x
Bypass max...........7x
32Byte Gran..........Disable
bachus, I've got some fresh stuff for your thread:
1. 2x512 DDR604 2.5-3-3-6 1T (going for the top :D )
2. 4x512 DDR572 2.5-3-3-8 2T
Rig:
- A64 3500 Winchester (CBBID 0451 EPMW) + XP120 + Delta 120mm 190CFM
- DFI NF4 Ultra-D (Bios 510-2)
- 4x512 GSkill 4400 LE (TCCD 440 chips)
- CM Stacker (case temperature 30-31ºC)
DDR 604 2.5-3-3-6 1T 2.9v
http://img176.echo.cx/img176/7305/ddr6049eu.jpg
DFI memory timings (from top to bottom):
200-E-2.5-3-6-3-12-16-3-3-2-3-2336-1-E-A-0-7-2-9-F-6-256-E-16-7-D
:D :cool: :woot: :D :cool: :woot: :D :cool: :woot: :D :cool: :woot: :D :cool: :woot: :D :cool: :woot: :D :cool: :woot: :D :cool: :woot: :D :cool: :woot:
DDR 572 2.5-3-3-8 2T 2.9v Bank Interleave Enabled
http://img128.echo.cx/img128/1038/ddr5722gb9no.jpg
DFI memory timings (from top to bottom):
200-D-2.5-3-8-3-16-22-3-3-2-3-2046-1-E-A-0-7-2-9-F-7-256-E-16-7-D
2.5-4-3-8 OCZ platinum rev. 2 TCC5 running 300x9 with 3000+ Venice 0517 APJW .
ram cooled by 120mm Sunon
@amrgb
Nice results man!!!
Could You tell me what are Your's everyday settings of these 4x512 2T?
I'm concerning to buy another pair of LEs and wonder if they clock high enough :D I'm interested what is the max stable (gaming, win apps) MHz with 2,5-3-3-6 and tightest alpha timings as possible.
Using a mixed set of G.Skill LE 4400 with 440 chips and G.Skill LA 4800 with 440 chips. Maximum Memetest stable was 290mhz and the best I could get in Windows was 285mhz PI 32m stable.
Using a DFI NF4 SLI with 3700+ SD (see server in my sig)
Thanks Ziku.Quote:
Originally Posted by Ziku
Well, it's difficult to say what are my everyday use settings with 4x512 since I started to use 4x512 only a couple of days ago :D
But I have already two profiles: default and max overclock.
At default I run my cpu at 2200 with memories at 200 2-2-2-5 2.6v and following timimngs (bios 510-2):
200-D-2-2-5-2-7-9-0-2-1-1-3072-1-E-D-0-7-2-6-F-4-0-E-0-7-D
At max overclock I run the cpu at 2600 with memories at 260 2.5-3-3-7 2.7v and the following timings:
200-D-2.5-3-7-3-12-16-3-3-2-2-3072-1-E-D-0-7-2-8-F-6-128-E-16-7-D
The default profile is fully tweaked and I cannot tight any further. I should note that it's the exact same setting I was using with 2x512 (except for the 2T). So here no loosening due to the 4 dimms.
The max overclock profile is still in a "alpha" state and is my start point.
I used to test my settings with 4 instances of superpi32M running simultaneously and both profiles can pass this test and everything I've thrown to them so far.
With a good memory controller, you should have no problems with 4 dimms, and you can also pick the best 2 to set new 2x512 records, like I did :D
If you want more info just ask.
an old screen with gskill LA 2*512 2.5-3-3-6-T1@300mhz
-> http://users.skynet.be/bk265593/wooot.JPG
I think i can do +-305mhz 2.5-3-3-6
@ L@TrO
You have to provide a screen with a superpi32M run and two cpu-z screens, showing the cpu and memory tab (make sure that the cpu-z version is visible) in order for your result to be comparable with the results in this thread. Superpi2M stability is way far from 32M stability.
Take the opportunity and give a try to 305 ;)