just installed latest rivatunner...now what ?
Printable View
just installed latest rivatunner...now what ?
click on the little arrow next to 128-bit NV43....
click on the low-level system settings
click install near the bottom
check allow enabling hardware masked units
click customize
click to the left to check the stuff
my checked ones are:
00,01,08,09,10,16,17,18,19
wow many thanks!!!!!!
i got 3814 default in 2003....
why i dont have temperature readings ?
3dmark 2003
All Default
3814 -> 4796
Weeeeeeeeeeeeeeeeeeeeeeeeeeeeeee
Works
Tedy - read back a few pages regarding the temp readings..6600/6200 doesn't have temperature reading enabled in the bios although this feature is available on the pcb. There is a link describing how to hex edit the bios and enable this feature. Both Ackbar and myself have done this successfully. :D
i'm too dumb :D
would you be so gentle to PM with details :)
thanks
My testing so far...this 6200 OWNZ YA ALL :D
Leadtek A6200 128 TD
@ 300/550 (stock) - 3814
@ 300/550 c/8 pipes - 4796
@ 345/645 c/8 pipes - 5727
@ 400/655 c/8 pipes - 6174
@ 450/655 c/8 pipes - 6435
think i'm gonna hit 550/700 with this baby and 7k+ 3dmark 2003 ...what a card...:)
imagaine watercooling and vmod it :) 600/800 ?? :P
congratulations tedy - thats some nice OC...i just sent you the pm regarding the temperature monitoring...good luck with that...if you hit 700 on memory i will be very jealous!! lol..thats my holy grail as of right now...i can't wait to get back to my computer and start tweaking more... :) thats all for now - good luck tedy - keep cranking that card :toast:
Glad you got all that figured out Tedy! Feel free to PM me as well if you need some help with some of the trickier things. I don't see any point in spending even $10 more on a 6600 when the 6200 overclocks like crazy.
Great job! :toast:
WOW!!! I have the same Leadtek card you have but have been afraid to try clocking the core higher then 375. Guess I'm going to have to give it a shot. I can tell you that you can go higher with the memory. I have the memory at 685 now with no problems.Quote:
Originally Posted by TEDY
Also, I would like to know about getting the temp readings working as well.
Some great results guys.
I wounder when a manufacturer will catch on and fit this card up with some faster Ram :)
Just overclocked the core to 400 and ran 3dmark03 again with good results.
375/685 c/8 pipes - 5537
400/685 c/8 pipes - 5709
I'm a little conserned about the exclamation point. Have to get the temps to see whats going on.
Ok, got the temp monitoring mod working. :)
my core is running at 65c, which I'm assuming is pretty hot. Thats with core core @ 400. Should I be concerned??
65C at load isn't anything to worry about; my X800XTPE at stock would regularly reach 75C at load, but that is in spec.
thank you guys....will try this bios thing today after job...is it hard ? :D
It's very simple, but just make sure you keep an unaltered backup of your original bios in case anything happens (power goes out while flashing) and also have a spare PCI card handy if possible.Quote:
Originally Posted by TEDY
I'm beginning to think that the AGP cards don't overclock as well as the PCI-e cards. I seem to be running pretty stable at 400/685 and I think I can live with that. My idle temp is 62 celcius though so that makes me a little nervous. I don't know if I'm brave enough to try replacing the heatsink/fan. Isn't the heat sink clued to the GPU??
no pci gfx tho :)
is it possibel to unlock the pipelines on a AGP card to?
What card is better Asus GeForce 6200 EN6200GE/TD 128mb 3,6ns Hynix or Gigabyte GeForce 6200 128Mb 4ns Hynix
I'd go with the asus - 3.6ns ram is always better than 4ns :)
Blueberry - unfortuantely, it seems that most people with 6200 agp cards are unable to unlock the pipes as they are locked on the actual chip - you can check in rivatuner though..you might be lucky :)
AlterBridge86, I have a AGP 6200 and had no problem unlocking the 4 extra pipes. I have the Leadtek AGP 6200.Quote:
Originally Posted by AlterBridge86
weeeeeeeeeeeeeeeeeeeeeee
300/550 53°c :)
I stand corrected - blueberry, you can unlock pipes - take a look in rivatuner :)Quote:
Originally Posted by JamesDax
A64 3000+ (1800Mhz) ==>> 2500Mhz equal with A64 3800+
DFI LanParty NF4 Ultra D
2 X 256 ADATA vitesta PC 480
GF 6200 ==>> 6200 GT with softmodd
80 Gg 7200 rpm
aogem 450 w
just with polo 735 by thermaltake