Well what about him?Quote:
Originally Posted by Kriller
Printable View
Well what about him?Quote:
Originally Posted by Kriller
Quote:
Originally Posted by Dirt
that I presume?Quote:
Originally Posted by Fewture
Well I got that part, whats so special with this guy??
What makes him special is he's a XtremeSystems Forum Member:DQuote:
Originally Posted by Dirt
http://www.xtremesystems.org/forums/member.php?u=5267
http://www.xtremesystems.org/forums/...earchid=196553
OPP
He is the DaVinci of designing overclockable boards.
280 @ 3.5v would be fine by me if it can hit it. were you thinking 3-2-2 or 3-2-3 on your guess???
hummm ***dreams about 360 FSB with a 4/5 divider***
ahh, good :)
the board for me is the LP-UT nF4 SLI-D or the LP-UT nF4 Ultra-D :)
(who the hell needs the silicon-raid-controller :rolleyes: - the nF4-SLI/nF4-U-chipset is sATA300-ready ;))
3-2-2, I know it can be done with one stick.Quote:
Originally Posted by iboomalot
280 may be really pushing it in dual mode:D
OPP
Good exponation, thnx :banana4:Quote:
Originally Posted by MIN_Roadkill
He's a genius and makes fast boards and biosses to go with it :D Basicly.. :PQuote:
Originally Posted by Dirt
hummm I might have to spend the money on this
I figure my X800XT @ PE+ speeds will work until the R520 comes out this summer and I bet this board should ROCK with future upgrades.
R520 this summer and trade my 3500+ in for a FX-55 after the FX-57 has made the FX-55's prices drop below 700.00 USD :D
Might not be close to OPP's Phase change super cooled monster but a 3ghz 1mb cache FX-55 with two R520s in AMR config will be a decent gaming rig at the end of the summer. :D
Quote:
Originally Posted by Kriller
Oskar Wu is "made in Taiwan" :D
same :banana::banana::banana::banana: ;)Quote:
Originally Posted by Onepagebook
LOL :DQuote:
Originally Posted by Onepagebook
Some spec of DFI LanParty NF4 SLI :
NVIDIA nForce4 SLI
CPU : Athlon 64 FX/Athlon 64
PCI Express : 20X
NVIDIA SLI Multi-GPU
Ports USB : 10
Disques durs : 4 PATA (UDMA133) + 4 SATA1 (1,5GB/s) + 4 SATA 2 (3GB/s)
RAID Morphing
Cross-Controller RAID
NVIDIA ActiveArmor
Native Gigabit Ethernet
NVIDIA Firewall
NVIDIA nTune
8 channel audio (Dolby 7.1 Karajan)
DFI CMOS Reloaded
DFI Genie Bios
Jumper to select SLI mode or not
http://img.photobucket.com/albums/v5...DFI-bridge.jpg
7.1 Karajan Sound :
http://img.photobucket.com/albums/v5...FI-karajan.jpg
http://img.photobucket.com/albums/v5...-karajan-2.jpg
First Screenshot @370@1T : / edit : not me :D
http://img.photobucket.com/albums/v5...set-FSB370.jpg
how high can the FSB go when the bus multiplier when set at 5x ???
I heard the a8v for example becomes unstable above 1150mhz
ouch 370 and only 7400 sandra those 6-6 clocks sure are hurting things.
what LDT did you use at 370?????
Just AWSOMEQuote:
Originally Posted by Zanr Zij
:slobber:
who can confirm that this mobo can lock PCI Express clock ? Thanks :)
I think the jumper would be bit different from the new version.;)
I think more importantly, 3-6-6 is not that necessary for everyone :D , from several conversations with oskar,
we all think that's just the confirmation that how high the fsb this board can reach.
As long as board can do stable @ DDR600~650 with CL 2.5, I think that's good enough.
maybe b'coz admin of dfi-street said that this mobo first release about Feb/ March may be June :D...Quote:
Originally Posted by Onepagebook
I too am glad about the 5v rail.
If the board can only use nvidia cards which was expected why the hassle of the massive jumpers? No other SLI board has this to enable SLI.
Quote:
Originally Posted by Kriller
:D
Nice board but i think i get a new aprilia rsv mille 04a instead.
Quote:
Originally Posted by Onepagebook
most Important in performance is Command Rate ( 1T ) and ratio of CPU Speed/ Ram bus... ( not be multi ) ... .Timing give increase about 3-5% at same bus...
Of course cas 2.5-x-x-y be better :D ( x < =4 )
nice board but too expensive... I am not ready to pay that much just for the voltages. I like the board layout though
yeah, now happy with MSI Neo2 because of price of it and PCI Express Dual Vid... Too Expensive... But maybe change in midle of this year.. :) or sooner if have money :D