Beta bios 1006.005 arrived.
ftp://ftp.asuscom.de/pub/ASUSCOM/BIO.../K8N-E_Deluxe/
So far I didn't notice any difference with the 1005 version. Probably support for the new D0 steppings I suppose.
Printable View
Beta bios 1006.005 arrived.
ftp://ftp.asuscom.de/pub/ASUSCOM/BIO.../K8N-E_Deluxe/
So far I didn't notice any difference with the 1005 version. Probably support for the new D0 steppings I suppose.
I take that comment about that nic issue back and throw my switch in the trash :p:
I think i'll wait for the final to see the changelog, i'm happy with the way it runs for now.
Ok, so I just flashed bios 1006.08 Beta. Anyone know what's new in it?
Dont know wat's new ,but it seems ok.Quote:
Originally Posted by IvanAndreevich
Kan run 300 htt stable now , 3 X LDT and 5/6 mem devider (240 mhz) (krap twinmos 512 mb set :D )
Next week som Gskill pc 4800 1/1 action a hope :banana:
Did you get any improvement on the HTT from previos version?
Now it is stable at 300 mhz ,1005 did 285 mhz stable .Quote:
Originally Posted by IvanAndreevich
At 3 X LDT 310 mhz (930 mhz ldt) my cpu reboot the system .
At 2 X LDT 270 mhz :reboot.
At 1 X LDT 270 mhz :reboot
At 4 X LDT 240 mhz : reboot
Seems a64 newcastle only work corectly at 4X and 3 X LDT multiplier :rolleyes:
Woo-hoo that's great. Increases are always nice.
Hm, Bios 1007.05 beta seems to have helped in some compatibility with my new x800pro. Before, I was getting some weird colors in the bios. Just weird, will have to investigate more.
How do i adjust HTT and Multiplier on the K8V-SE Deluxe? I cant seem to find them anywere. I have the 1005.006 bios
Question: I can't find the RAM divider in the K8N-E Deluxe. I have the 1006.08 Bios.
the ram divider in this mobo is set the memory clock manualy..in chipset advanced setting... :)Quote:
Originally Posted by shadowing
Quote:
Originally Posted by Smolly
what chipset your memory?
and your cpu?
Iwill be getting one of these boards soon. At this point, what BIOS is best? I was wondering if there was a vDIMM mod guide for it?
I just got this board today and when i started to play with it i set the HTT to 4 and the Multiplier to 10x in my A64 3200+ NewCastle(2.2GHz stock) with Corsair XMS PC3200 256x2. and my AGP went up to 90 MHz, i though this mobo had a working AGP and PCI lock but the PCi stayed at 33, Only the AGP goes up. No artifacting or anything. I have the latest BETA BIOS, Please help me.
Anyone know what's the stock voltage for the 64's on this board? Mine's running at 1.550V. I'm not sure if that's safe.
Thats what mine ran it at, i had to switch it back to 1.5V
hellow
this is my first post on this forum...
but i just wanted to tell something...remark something...
@ smolly (also from belgium :)) :
quote :
Kan run 300 htt stable now , 3 X LDT and 5/6 mem devider (240 mhz) (krap twinmos 512 mb set )
the max htt of this board is 800mhz instead of 1000mhz !!!!
3*300 = 900 !!!!
when you're above the 800mhz limitation,you risk dataloss / datacorruption !
greetz:)
ps : i have a 3400+ newcastle @ 2.4ghz (stock)...my max oc = 2.5 (prime95 running,when i go higher i get an SUMOUT error...)...
my ram max = 244mhz(CL2.5)
my HTT max = (800/3) = 266.66Mhz (theoretical max ;))
Isn't it a very low oc ?! 2.4->2.5 ? :confused:
I went once from 2.4 upto 2.6 ! but that was without prime95 running -> stable ? donno :)
greetz
Help me :)
:toast: :toast:
*****
edit
attached file = my max stable oc !
Probably your ram limiting your oc, Twinmos DDR400 512mb modules only do about 230MHz max from what i've experienced - to increase your OC you must therefore set your memory to run asynchronous at a lower rate(ie divider) in your BIOS.
Even though the HT is rated 800MHz on the board it should be able to handle 1000MHz without any problems, so don't worry about that just keep your LDT at 3X for most stable usage.
Quote:
Originally Posted by MrQ3W
LDT already @ 3x
Ram maxed out @ 244 (i setted my Cpu Multiplier @ 7x and tried to move my ram till the highest clocks...)
ans 244 was the highest i could reach stable...
so i dont think the ram would be the problem... :rolleyes:
greetz
i will try this evening to set my vcore to 1.750...
we will see :)
but most oc's i saw on the internet were with a vcore = 1.750v :)
hopefully it will work :)
greetz
i setted my vcore up to 1.750v
but my cpu isn't prime95-stable @ 2560mhz...
i have a serious problem
i can't oc 200mhz !!!!
pfff...is it such a bad oc'er ?
or is it possible there are some other reasons for this bad oc ?
Yeah, it really is. I can't even get it to be stable at 10X at 220 mhz when I know my RAM can handle it. I even upped it to 1.6V...
check the attachements !
same cpu as mine ! (stepping,...)
but other mobo (i guess)
....
:confused: :confused: :confused: :confused:
....
Quote:
Originally Posted by brechtvm
G-skill pc4800 1X 512 mb 2.5-4-3-5 1/1 devider.
max 1T =240 mhz htt stable .
max 2T =304 mhz htt 100%Stable
Asus K8N-E does not like 1T at al .
A' dont know a solution .
So for now my system runs 304htt X 8 MP on air 24/7 (2T)
It is the best a kan doo on K8N-E :rolleyes:
http://users.pandora.be/smolly/k8n-e/MEM/304.JPG
Quote:
Originally Posted by Smolly
nice HTT
mmmh..it doesn't like 1T...
thanks for telling me that
by the way : max HTT-speed = 800 !!!!
so 3*300:900!
your I/O multiplier should be @ 2x if u dont want to have data corruption :)
do you also have a SATA disk ?
i have a 200gig WesternDigital SATA disk...
and a few people told me yet that sata causes an oc-limitation...
ps: feel free to mail me... (pm me...or track me @ games.telenet.be (oc-threat))
edit : checked your site (also parent dir's)..
and now my question..i wondered how u can get your cpu @ 1° @ 2800mhz ;)
do you have Phase Change cooling ? :)
or Dry Ice cooling ?
it's a nice oc...:)
i can get my 3400+(2.4ghz stock) @ 2.5ghz max ...
and it's really irritating/frustrating...
greetz
edit :
i searched for a while (few minutes)
and i found the answer :
'Waterkoeling gekoeld door de bierkoeler gemod met propaangas :p '