NF7/S Rev2.0 : D25 Modded bios by -=Merlin=-

Quote:

---

Originally Posted by STEvil

I think its a chipset problem.

Have you guys checked to see if your system clock is correct? On the a7n8x-dlx 2.0 i'm using now if I run 200fsb my system clock (the one in the taskbar) runs faster than my watch.

Quick way to test is to set it the same as your watch within a few seconds and then in about 4 hours check it and see if its out any more than it was before. This thing will pick up about 5 minutes every 1-4 hours it seems.. 12.5x193 and its doing fine so far so it seems to only happen at or maybe above 200fsb, though this board isnt stable past 200, so..

---

i've already notice that thing, when using "neutron" (a program to set the clock), it's few second every day, but no problem running 24/24 with this "problem"

:lol: Real over-CLOCK-ing :D

and now we all know why it's called overCLOCKing yeah :D

Do you guys know about this xp2800 t'bredB it clocked at 2.25Ghz/166fsb. It was on sale nov'02 with very limited quantities (before barton). B/way this is with nf7s ver.2.00 and Gskill on air.

Quote:

---

Originally Posted by Dumo

Do you guys know about this xp2800 t'bredB it clocked at 2.25Ghz/166fsb. It was on sale nov'02 with very limited quantities (before barton).

---

Hmm... and what's your question? Don't have a clue what ya wanna know... :stick:

Quote:

---

Originally Posted by SAE

Hmm... and what's your question? Don't have a clue what ya wanna know... :stick:

---

Why AMD killed xp2800 tbred'b? It was released in small quan. before barton.

Killed off because it was end of the line (no further upside) for Tbred in terms of default frequency on stockcooling at stock vcore hence the very limited release

Hello all!

I`ve got nf7-s 2.0 with 2xKHX3500 256mb and my fsb dosen`t go over 235mhz :( I`ve got AMD XP 2200+(133x13.5) Wich bios would be the best for me? (I want to go over 240fsb :D )
Tnx, by

Hi!

Try the Mantaray XT CPC-On ! :)

hm.. Where can I download it?

I found it! But there are two of the same name! Abit NF7-Sv2 D10 CPC-ON mantarays-xt and Abit NF7-Sv2 D26 CPC-ON mantarays-xt! So wich to download?

the d26 is better.. you should try the cpc on and the cpc off to see which gives better performance. try running everest and sandra to see how each bios affects your memory performance. almost all of the tweaks done to the bios are to improve memory overclock and performance.

D27 is out!

When a new mod bios? :banana:

http://forum.abit-usa.com/showthread...5&pagenumber=1

i tried d26 and i got 245 fsb with KHX 3500 256 (singel) 2.0 2-2-7 (2.9V)
I need to do some v-mods to go higher :)

check in the mods section. There is a forum on the nf7-s. Actually there are like 15 but whos counting... Or you can try google.. If you couldnt tell by now the nf7-s was an insanely popular board to overclock with...

oh and about the d27 bios.. Dont be too disapointed if there isnt much in the way of modding from tic tac and merlin. The nf7s platform is a little long in the tooth at the moment. But if merlin and tic tac are still running thier boards im sure you will see something coming from them.

tnx. I`ve found the mods!

Quote:

---

Originally Posted by MaxxxRacer

[...]
oh and about the d27 bios.. Dont be too disapointed if there isnt much in the way of modding from tic tac and merlin. The nf7s platform is a little long in the tooth at the moment. But if merlin and tic tac are still running thier boards im sure you will see something coming from them.

---

I hope so, I'd like to try new SATA bios

Tictac/Merlin... help me please! Add new sata bios 4.2.5.0 to NF7-S rev2 bios mod platform.


EDIT: sorry, I've just seen that the last D26 Mantarays adds new SATA BIOS.

may i know which is the best choice of bios for abit nf7 verison 2 now?

Mantaray XT D26

with Command Per Clock Enabled / disable.. which is better?

im getting 230mhz with CPC off...
i only get about 220mhz with CPC on...

CPC enabled is better. Takes 30mhz+ to beat it with cpc off.

i have tried the Mantaray XT D26.. initially i tried 200 x 11 at 8.3.3.2.5(optimal) on 2x 256 twinmos ch-5, it runs prime stable for 26hrs..
when i tried playing frozen throne.. most of the time it hang... wonder what's going on... tried reinstall the game..it doesn't help

Quote:

---

Originally Posted by joseph24

i have tried the Mantaray XT D26.. initially i tried 200 x 11 at 8.3.3.2.5(optimal) on 2x 256 twinmos ch-5, it runs prime stable for 26hrs..
when i tried playing frozen throne.. most of the time it hang... wonder what's going on... tried reinstall the game..it doesn't help

---

new bios

http://xtremesystems.org/forums/showthread.php?t=47570

by -=Merlin=-