LiquidFrostbyte

i felt like i needed to seal the bottom retaining plate of the wb agonist condensation so i applied liquid electrical tape to the bottom surface... the brush that comes w/ it isn't worth a rat’s butt for doing fine detail work in my opinion so i used a small paint brush to apply it.

i then sealed the middle portion of underside my P4 2.8GHz Prescott cpu w/ clear nail polish, being careful not to get any of the nail polish on the pins.

:toast: :toast:
very nice job on the insulation man
so now you have a kick a$$ chillier and a matching insulation job
i cant wait to see the oc result
good luck

thanx kayl... i've been following yur thread on the dd that u made from a frig as well

:toast:

Rodney, a good friend of mine @ the VA where i work did me a favor today & cut up my Asus hs that was on the northbridge of my mobo... he made the four 1/2" X 1/2" sq hs that u see on the left for the mosfets on my vc... i'll attach these w/ thermal adheasive that i ordered from danger den.

Thanks Rodney! :)

made adjusting knob for the PEV by warming up the end of a piece of tubing & stretching it around the knob of the PEV over the weekend... i'll be using this to adjust the superheat of the chiller once i get it under load.

here it is finished... i drilled a 1" hole in the face of the shroud & put a rubber grommet in it w/ a bolt epoxied in the end.

nice job :toast: :)

You have done such a beautiful job, it was so moving that I started to cry :toast:

Good job. I will need to use that for the next chiller I build , with your permission of course.

ocme YGPM

beautiful insulation OCME, and nice work Chilly1, like always :)

WoW i realy LOVE thta insulation job on the waterblock !!! :slobber: :slobber: :slobber: :slobber:

thanks for all yur support guys... i got the WB's mounted and double sealed & all the other insulation is finished as soon as i get the defective temp probe replaced i'll be ready to see wut this chiller is capable of doing...

This thing looks awsome.. Chilly1, will you be selling these things? I really would like to buy one, as I could easily place it under my case or next to it, after proper insulation of course. How much would the going price be would you think???

Um you should pm him.

Alright, you don't have to be rude about it.

here are a few pics of the video card insulation

top shot

here is the card in it's final resting place seated in dielectric grease

here is a shot of the back of the MoBo tray... i had some left over seal string that i molded over the exposed ends of the nuts & bolts

here are the WB's before making the connections & insulation

here is everything connected & insulated

i fired that her up & it came on without a hitch... i'll be posting some benches in the next few days...

Beautiful job.

thank ya there chilly1. of course none of this would have been possible without you... for all the countless phone calls & emails & time that you spent making my xtreme chiller dream come true, i would like to thank you my friend!:)