Moore pictures here http://www.drcooling.cl/coppermine/t...s.php?album=22
Printable View
Moore pictures here http://www.drcooling.cl/coppermine/t...s.php?album=22
drcooling.cl ... Let it snow , let it snow , let it snow ... :D
Nice work there !!
Thanks :D
Wow :slobber: ...cannot come close to that, but here's my first attempt.
http://home.comcast.net/~gautamb/overall.JPG
http://home.comcast.net/~gautamb/mcw50.JPG
http://home.comcast.net/~gautamb/mcw6002.JPG
It's a nice chiller Gautam :toast:
Some pics of mine by Tyrou :worship: More here
Specs:
- Compressor 1/4HP
- Pecomark condenser
- HX tube inside tube
- Thermostat (-30°C to +30°C)
- R402A
http://www.beforeoverclock.com/images/IMG_0150.jpg
http://www.beforeoverclock.com/images/IMG_0168.jpg
http://www.beforeoverclock.com/images/IMG_0174.jpg
Wow..Very nice :) I think the condeser is a bit small for a chiller. Test it and tell us. :)
Knowing Tyrou's reputation I am not really afraid about that... anyway, I will share some more pics and results with you. :DQuote:
Originally Posted by Unseen
Yeah i know tyrou is one of the best. I told u that from my experience in chillers.
Anyway Good Luck. Enjoy your chiller.
Thx mate! :)
i threw ice in my res once does that count? lol.
seriously tho guys those setups are awesome. my next project is gonna include one of these. its gonna need to be quiet as heck tho and portable. also its going to be all one case. comp and chiller. i think ill just build a whole new case from scratch.
good job tho guys keep it up.
EMP - K3 first prototype
-50C~ @ the coil
http://img19.imageshack.us/img19/261...ure018s4ft.jpg
Hmm seems like your temps may be inacurate.......the bottom of the coil isn't even frosted........Anyway this picture doesnt do it justice and is old. Ive cleaned up the insualtion and wiring since then and it looks a lot neater. 1 hour of pull down with a 1 1/2 gallon res \/ think the temp is wrong also propylene glycol froze when it was -40F. The antifreeze i used claimed -50F
http://members.cox.net/wmdieselmc26/chiller%201
in the pic u see it turned off...
Ahh ok. was gonna say if the bottom of coil can't beat ambient temps and freeze......................Quote:
Originally Posted by The Byter
http://img439.imageshack.us/img439/1845/pict00182oh.jpg
http://img402.imageshack.us/img402/2231/pict00173xu.jpg
Thats all people :)
I havnt made the chiller mysefl though :) - made by Rodondon
What an insulation! :D Nicely done mate!
WB by skirms and polished by myself :D
http://www.beforeoverclock.com/images/WBskirms1.jpg
http://www.beforeoverclock.com/images/WBskirms2.jpg
Action! :)
http://www.beforeoverclock.com/images/WBskirms3.jpg
http://www.beforeoverclock.com/images/WBskirms4.jpg
Nice stuff :)
Thx mate! ;)
Mostly finished. Didn't have a camera for the unit when it was attached to the computer
http://i20.photobucket.com/albums/b2...verview800.jpg
166x11 = 1826Mhz with -27C coolant
http://i20.photobucket.com/albums/b2...ant166x111.jpg
I made a thread but here is a couple of pics.
http://img109.imageshack.us/img109/2...ostdone8xa.jpg
http://img109.imageshack.us/img109/941/ctemp7gu.jpg
Almost complete need a couple minor tweaks.
http://img503.imageshack.us/img503/8...inshed14qz.jpg
I have a real small pump right now. I have a bigger one on order should be here this week but I have my 333fsb 3000+ (2166MHz) running at 400fsb giving me a clean 2600mhz. I haven't pushed the limits on this yet I will once my new pump going. Right now the system is rock solid stable at 400fsb. My CPU temps are off from what they are actually are. I put a layer insulating tape under my CPU in the open square, I am sure that is where the motherboards temp sensor is. anyway here is a screen shot of 2600mhz.
http://img45.imageshack.us/img45/8593/400mhzfsb9ne.jpg
nice clean setups guys.
my mach modded chiller
http://i7.photobucket.com/albums/y26...i2/cooler1.jpg
http://i7.photobucket.com/albums/y26...hillertest.jpg
First ghetto rig up
http://i7.photobucket.com/albums/y26...2/PICT0111.jpg
case sides on.
Got another pc-07 on the way that needs to have a trim ;) to match the top.
Its holding water at 15c so its nicly above the dew point so dont haft to insulate :)