Thermaltake Ultimate 3.0 without fans - no air flow for hours -> days
I could run at stock forever without a fan. Getting Windows 10 setup, lots of broken.
http://fugger.ipage.com/x99/06nofan.png
Printable View
Thermaltake Ultimate 3.0 without fans - no air flow for hours -> days
I could run at stock forever without a fan. Getting Windows 10 setup, lots of broken.
http://fugger.ipage.com/x99/06nofan.png
Test again with runmc's SS. Awesome load handling with -45C evap temp:up:
http://i.imgur.com/RCmVj4r.png
I haven't tried 10 yet Charles. You like?
Im downloading it. I heard more positives reaction than negatives. Only HWBOT not allow Win10. The same donwclock issue as with Win8...
Let me know how you like it. I like 8.1 for my home rigs so may jump over to this.Quote:
Originally Posted by FlanK3r
I will switch to 10 Preview for home, no more metro.
Hi Guys,
Quick question. Spec X99 deluxe/ i7 5930k with a swiftech h320 cooler with a bit of a difference..... I use three undervolted Sanyo Denki 120*38mm(love em) on the swiftech instead of the default ones. The motherboard headers or the mini fan extension, can they either take the amps the denkis draw? I currently have them connected to the fan controller on my NZXT phantom 820 which can take 30w per channel. I'd like to use the smart fan features of this mobo? Dont wanna fry those headers.
Cheers
Just ordered a new setup myself. 5820k / X99 Deluxe / Vengeance LPX 2666C15 will be under a custom loop so I am hoping for good results.
okay think I have a good understanding of the board now, and pesky ddr4 timings.
http://i.imgur.com/OQd9r7w.jpg
For me 3100 C11 is all over the place, sometimes 7m20.865-7m.20.562 1 time in 2 days.
3200 C12, can run back to back same time within .100 over and over again.
Normal wazza and method is working fine here.
http://i.imgur.com/vCEGoOL.jpg
Cold next weekend when 2nd Tsai Pot arrives. :)
Each header is rated at 1 amp max.Quote:
Originally Posted by allygash
The max for this chip
http://i.imgur.com/8IuvYsX.png
http://i.imgur.com/q3loMSe.png
http://i.imgur.com/IcfYQhz.jpg
nice dumo:up:
Dumo: with which cooling method? Phase? If yes, seems very good, if LN2 - not much at CPU :(
LN2 FlanK3r, unfortunately
http://www.overclock.net/content/type/61/id/2200199/
http://i.imgur.com/1IVI5Wv.jpg
on single stage, still getting spanked by fred haha
3D fun ahead
TT water 3.00 hold the load fine
http://i.imgur.com/e5r86Gw.jpg
Red board bleeding efficiency :)
http://i.imgur.com/xMLNIBo.png
Have a higher one at 5140, but failed @ screening.
http://hwbot.org/submission/2645919_...20k_2097_marks
Good efficiency LS, what memory and uncore settings?
3200 12-13-15-15 tight with 4.7 uncore:)Quote:
Originally Posted by hiwa
4.8 is doable but almost all chips I have tested stop at about 4.9 uncore.
So retested this 5960X one more time before it gets returned to confirm the turdiness.
5.2 R15
http://i.imgur.com/BDRcT3N.png
5.3G R15
http://i.imgur.com/lmWRuOe.png
5G XTU
http://i.imgur.com/aZM1l2j.png
5.2 XTU
http://i.imgur.com/i4hJ1r6.png
Just had a nice surprise from my lovely Wife, a great birthday present I must say. Guess what I'm up to this weekend, lol.:)
http://i572.photobucket.com/albums/s...2/IMG_3842.jpg
Been playing around with my 5820K...and while not as awesome as you guys and your fancy 5960X's....lol
I think I've got a decent one. 4.5Ghz on Air @ 1.28v and 4.7Ghz at some voltage but BSODs on bench. Haven't touched other voltages and will have it under water next weekend.
Tests 4X8
http://i.imgur.com/KeiP5oF.png
4X4
http://i.imgur.com/GctnChW.png
Latest UEFI Build for R5E:
RAMPAGE V EXTREME UEFI 0801
0801 Download Mirror
Latest UEFI build 1002 for the X99-Deluxe:
X99-Deluxe 1002 UEFI
Mirror
Thank you Raja