Use F12 in bios, to printscreen the bios, the images will save on USB device.
Also i think that profiles from bios cand be open and saved from windows with some software given by Asrock and than you can load them to another board.
Use F12 in bios, to printscreen the bios, the images will save on USB device.
Also i think that profiles from bios cand be open and saved from windows with some software given by Asrock and than you can load them to another board.
Let's make thinks easy :D
http://www.abload.de/thumb/dsc_00384nskw.jpg http://www.abload.de/thumb/dsc_0039ufs1h.jpg http://www.abload.de/thumb/dsc_0040ieshd.jpg http://www.abload.de/thumb/dsc_0041njsgw.jpg http://www.abload.de/thumb/dsc_0043p1scx.jpg http://www.abload.de/thumb/dsc_0045esshw.jpg http://www.abload.de/thumb/dsc_0046tosrz.jpg http://www.abload.de/thumb/dsc_0047ntsoq.jpg http://www.abload.de/thumb/dsc_0048scsu1.jpg
SPREAD SPECTRUM put DISABLED.
You are on IGP? May be the IGP cand work well with higher frecuency memory- due to sharing memory? Have you tried with dedicatet VGA?
Also you can try to raise some voltages as i sad before.
I raised all voltages! No difference!
I'm also on PCIe.
The strange thing is...it ran with same settings as on my asus MVF. But only one time! That was prime and linx stable!
Quote:
Originally Posted by emertX
i am not pretty sure what ur module can do .
if ur module is samsung chip . please try timing as below .
10 12 12 32 1T 16 214 7 10 10 30 8 others u can leave auto . 1.65v
it should work for any good samsung chip which can do 2400 even 2666
I saw GT frecuency active, on other boards i saw it inactive vhen dedicated VGA used.Quote:
I'm also on PCIe.
Quote:
Originally Posted by xdan
it is fine ..dont worry
Postcode 55!
Here are some pictures, what they are able to do on MVF:Quote:
Originally Posted by nickshih
http://www.abload.de/thumb/samsung3qpxbs.jpg
http://www.abload.de/thumb/samsung236zwi.jpg
http://www.abload.de/thumb/samsung72jeo.jpg
I'm tired of testing these chips! Hopefully my board is fine! Tonight I gonna get some XMP 2400 chips! Maybe some 2800?!
What about these chips?
http://preisvergleich.hardwareluxx.de/783302
Do they work on that board?
Quote:
Originally Posted by emertX
i dont know what problem of ur module ...
My samsung is working pretty well here .... i think urs can boot 2666 with my setting
Quote:
Originally Posted by emertX
that is hynix ... sure
Me too!
Again - it bootet once and was linx stable...now...no boot????
Which means? Bad or good?Quote:
Originally Posted by nickshih
Quote:
Originally Posted by nickshih
Tested in single Channel---NO PROBLEMS!!! What could that be???????
http://www.abload.de/thumb/unbenanntlgzrk.jpg
Quote:
Originally Posted by emertX
TRRD please set 7
Same...no change!Quote:
Originally Posted by nickshih
Any BIOS Update?
I've tested 1.10, 1.14p, 1.20 and 1.30
What about these right here:
http://preisvergleich.hardwareluxx.de/815039
http://preisvergleich.hardwareluxx.de/814961
Raise SA voltage and VTT.Start with VTT,try 1.075,1.1,1.125,and SA try 0.95,1V.I am 100% positive that the problem is in this area.
Already raised to impressive 1.25 and 1.1!Quote:
Originally Posted by Alex-Ro
No change!
But why is it running with single channel?
Maybe my imc is damaged?
Tonight I'll test G.Skill 2400 CL11!
+1 This would really look great, very handy.Quote:
Originally Posted by ihog6hog
Ok seeing price here in cro cost something more than gene V, not sure about Asus Formula since it's not available yet...
Quote:
Originally Posted by emertX
maybe ur CPU imc is damaged ... i have some cpu here cant do dual channel also ...always 55
Yeah, but, 2200 is running pretty fine.
After the problems with 2400, I was able to boot and play around with 2600...and that was today!
No idea, what that could be!!!
Damn computerstuff
Quote:
Originally Posted by emertX
come on it is overclocking ..... i will try to use my samsung do the same timing as urs later... have something else to do now .
Live@Germany...:clap:
http://www.abload.de/thumb/2400cqsb9.jpg
Now...reboot!
Back again...with full sped of 2400 MHz!
:D:D:D
Here one great score:
http://www.abload.de/thumb/wow04pjc.jpg
But...why must I raise the vtt that high?
Do I always have to raise both vtt? And what is healthy for the rig? I mean, what is the max, I can give under water for 24/7?
I can't bott with a lower vtt than 1.15!!! But when I'm in windows, i can lower it to 1.05!
Quote:
Originally Posted by emertX
what vtt u used ?