sorry but my question was for the classified and not general.Quote:
Originally Posted by loc.o
Printable View
sorry but my question was for the classified and not general.Quote:
Originally Posted by loc.o
This is section only for bench....please.Quote:
Originally Posted by RNeon
The problem depend only of your CPU, each CPU is unique in this fact, depend on VTT/VQpi circuit termination every signals are terminated on core of your CPU, when you give cool with LN2 you modify its impedence. Higher QPI bus frequencies are very demanding of optimal signal line layout and power ability, this great ability are typically on EVGA and DFI and bloodrage, Asus has big problem on this fact and requires more VTT/Vqpi voltage respect this mainboard.
With this Mainboard is possible break the fsb wall on new steep D0, you must use a good mousepot a lot lot of LN2 one good 920D0, possibily bacth 3847A891 or 3850A796 or other, with evga utility, IOH over 1,35V for QPI bus, VTT Over 1,45V for block UNcore L3 and VTT........pciexp over 110.
And good look you have the possibility to Win a new WR with this Mainboard....:D:D
Very very nice raju :up:
i got my classified a few days ago and started benching today..
First tests are watercooled:
wPrime@BCLK 230
http://www.abload.de/img/wprime230a2op.png
max. BCLK watercooled
http://www.abload.de/img/cpu-zj2ak.png
http://valid.canardpc.com/show_oc.php?id=562538
this board is really impressive :worship:
canīt wait to do some phase change runs tomorrow :D
keep pushing it
Hey nice!
What idle and load temps where you getting?
Thanks :)
nice results on watercooling man. It will scale even further cold..
Very good ，EVGA Super powerful.
Thx guys :)
itīs getting better and better
http://www.abload.de/img/cpu-zgjkt.png
http://www.abload.de/img/1miks2.png
but killed my bench XP :(
I wonder how fast this thing @ 5 GHz would run GTA IV :)
Quick run on the non NF200 board tonight with the Xeon;
http://img24.imageshack.us/img24/809...5212wprime.jpg
so veeery low voltage for that clock raju! nice!
run some 06 cpu test for us :D
nice raja, gotta get barrie to prep the ln2, torch the pot this time to pull down quick and easy to -186 :D
http://img27.imageshack.us/img27/5282/069995.png
Load Vcore around 1.49V. Need more cold now to scale any further.
regards
Raja
hmmm, 1.49v load.. iam at 1.61v... same mhz :D
better cpu than mine... you little..
edit: what kind of temps are you having under load..? -108, same as 920?
W3540 magic now........:D
Hey raju:
Can you go high bclk 3D with low multiplier?
Hi Andre,
I have not tried yet, but willdo today and then 920 later. Around 229 it gets very sensitive to voltage vs temp..
regards
Raja
Yeah duing 06 test never lower than -108 on evap. Wprime around -106.4 for 5.2Ghz+..Quote:
Originally Posted by dpa
here's my VID table (temp -111 ~ -108)
for the 06 CPU test stable pass (Vdroop enabled) vs BCLK on 23X
http://img4.imageshack.us/img4/2057/vidtable.jpg
Vidmax= max CPU voltage at this temp range
regards
Raja
what are your thoughts vdroop enabled or disabled?
I usually take the time to work out peak load voltage and keep it on, never had an issue.
@raju
is VID means CPU VTT ?
VID is Voltage ID for CPU Vcore in that table.
A couple more runs tonight..
http://img12.imageshack.us/img12/2158/76006high220.png
http://img12.imageshack.us/img12/9017/7600632421.png
lol.. 32421 vs my 32426, same cpu clocks..
what kind of speeds on the gtxs?
700 on the GPU's, mem @ stock..
then we ran exactly the same.. gimme 5.3Ghz now...
@ -108 ?Quote:
Originally Posted by raju