Printable View
Thank you all for your support, It makes one feel better.
Darkninja462: Bought it from "Dustinhome.se" here in sweden. It's a replacement tray from lian li, should be available in your country as well.
Neither the less, went back to the powder coaters today and got a really good "treatment". They were very understanding and are going to let a sheet-metal worker look at it. If he can't fix it they'll laser cut and fabricate a new one for me.
ahh ok thanks mate I can only find one seller in UK but he's out of stock.
Ninja
Spyrious: Yeah I hope they'll sort it out. Would be an irritating set back if they wouldn't.
Unicorn: Thanks man. As I said, I really hope they'll be able to sort things out cause I don't have the extra material needed for a new panel. But I'll start assembling the computer withough the outer panel. After all, it's the last piece to go on.
trucha: Cheers! Thank you for your compliments.
Final assembly starts
I'm really excited as this project is closing in further and further. It's so fun to see things come together and so far I'm extremely happy with the result. All the bolts and nuts suit this case so nicely.
http://www.bandwidth.se/imgs/39/226/img7685.jpg
Parts on the table. Sorry bout the dvd-drive beeing a bit dusty. Missed that out.
http://www.bandwidth.se/imgs/39/226/img7686.jpg
Parts
http://www.bandwidth.se/imgs/39/226/img7687.jpg
It's a bit funny how factory made all the panels feel. It gives you that extra pleasure when assembling.
I want to point a HUGE thanks to Sifvert for providing me with all the bolts and nuts needed for this project. Thank you!
http://www.bandwidth.se/imgs/39/226/img7688.jpg
Mhm, bolt godness :)
http://www.bandwidth.se/imgs/39/226/img7689.jpg
http://www.bandwidth.se/imgs/39/226/img7690.jpg
So seriously packed with individual zip-bags for each kind of bolt.
http://www.bandwidth.se/imgs/39/226/img7691.jpg
Back mounted with round-headed hex bolts. Black. Looks slick
http://www.bandwidth.se/imgs/39/226/img7692.jpg
http://www.bandwidth.se/imgs/39/226/img7693.jpg
And a final teaser for today.
Do you know if the website where you ordered your motherboard tray ships to England ? as I cannot read Swedish lool.
Ninja
omg!
beautifull!!
LOL! That shouldn't be necessary! Try contact a couple of online stores etc and see if they can put this tray in their range of products. Shipping a tray from sweden would just cost you a hell lot of unecessary money.Quote:
Originally Posted by Darkninja462
There like gold dust in the UK loool I have sent various emails and no one seems to have or want to stock it.Quote:
Originally Posted by NysoO
Ninja
Have you tried to contact Lian Li directly? Maybe they are willing to help you out if you explain the situation :)Quote:
Originally Posted by Darkninja462
I have not that is my next port of call. So emailing them now.Quote:
Originally Posted by NysoO
Ninja
I'd like to hear more about that as well, I'm also in the progress of making my own case and could use a mobo tray.Quote:
Originally Posted by Darkninja462
Let us know ;)
btw, nice progress you're making there bud, looking sweet
i think this will look better if you use the white fans in front instead of black
Nyso,
I am following along with great interest. Brilliant work!
:eek2:
Masterful work!!!! I really like the attention to EVERY little detail! The DIY from scratch case, countersunk fans, custom DVD fit, custom fan controller, etc....SIMPLY AMAZING!!!
Keep up the good work!
This case exemplifies my sig.....it takes a LOT of work to make it look simple!
Thank you! Killer, I think I'll stick with the black fans :)
Oh well, another update for ya'll. Basically I've continues with the assembling. Got the whole front finished. Took a bit of time to get the dvd lined up properly in the slot on the front. Have sleeved as many cables as I had time to and mounted the pumps and moboslide. Also mounted the LCD-bezel at the back.
http://www.bandwidth.se/imgs/39/226/img7705.jpg
LCD-bezel mounted with counter-sunk insex bolts.
http://www.bandwidth.se/imgs/39/226/img7700.jpg
Front, pumps and dvd-reader mounted. Got a bit of cable management done.
http://www.bandwidth.se/imgs/39/226/img7703.jpg
Dvd mounted with m3 round headed insex bolts.
http://www.bandwidth.se/imgs/39/226/img7704.jpg
Fan controller mounted and the knobs attached.
http://www.bandwidth.se/imgs/39/226/img7707.jpg
Mobo-slide bolted and the tray was slit into place.
http://www.bandwidth.se/imgs/39/226/img7708.jpg
Close up on the pump-mounting. Rubber grommets and m6 hex cap screws.
http://www.bandwidth.se/imgs/39/226/img7709.jpg
The underside of the mid plate.
http://www.bandwidth.se/imgs/39/226/img7710.jpg
The left side with the internal cover attached.
http://www.bandwidth.se/imgs/39/226/img7695kopiera.jpg
And a final pic for today :)
Looking really REALLY good! Absolutely loving it!
~Bex
I'm totally liking this build :D
This looks so good in all black with the polished screws, I've also didn't painted the screws black in my V1200 just to create a nice contrast :)
But these fans are looking real nice this way, but you are pushing hot air into the case in this situation :O
Thanks. Well the fans are directed so that they push air into the case yes. But this is why I have separated motherboard and such with the internal cover, so the air will flow right out at the side. Thought it was the most common way to push fresh air thru the radiators, instead of pulling warm air from inside of the case.Quote:
Originally Posted by Zw_Roodbaard
awesome stuff.. that is some really great work.
for a second there, I was a little lost in the last pic. I was trying to figure out why that pci bracket was out of place and where your mobo tray went. Then I realized the full tray was just sitting behind the case, not installed. lol
beautiful :)
NysoO, did you play around some with the display and it's software? I couldn't get Asus Probe II, MBM5 and Speedfan to work. Everest and RivaTuner was a half@ss job.
Perhaps it's due to these progs not being optimized for AMD though.
Your build looks amazing although i find the hexnuts on the front stand out a little too much, it would look better if those were black imho. Keep up your excellent work!
I had a reply bout 24hours after I sent the email, they sent me a list of where I could purchase one in the UK which there was only 1 :eek:.Quote:
Originally Posted by matsjuw
Unfortunately there out of stock :( , so I shall email them and find out when there back in stock :) hopefully soon.
Ninja
Edit:
Looks absolutely amazing Nyso0 can't wait to see it finished, and its helped me a lot with the planning of my scratch build.
I must say that I am really impressed by your build. It takes a lot of time and attention to detail to make a case that looks good AND functions well. I can see from the pics that you have really spent the time to sweat the details, and what you have it turning out very nice.
Great work. Probably the best case build from scratch I've ever seen. I'm interested to see how you finish it all off.
Wow, simply wow. Can haz ur case? :rofl::ROTF:
Thank you!
Talked to the powder coaters today and the outcome was not too pleasing. The sheet metal worker said that It would be impossible to fix the panel perfectly. And he told me that the guys that would have lasercut a new panel for me was filled upp their asses with work, so it would take a long time to get it done. However, he offered me a 140$ compensation, a new piece of sheet metal, discounts if I would like to powder coat something in the future and a new free session of powder coat on the new outer panel.
So i have to fabricate a new panel which sucks.. will take about ~18 hours to fabricate a new one. But I'm going to try bending the old panel as good as possible and see if it can do as a temporary panel.
Any who., have finished the hardware and internal build to say 98%. It started up and is working great. Great temps and silence. Just got to do some sleeving etc. Anyways here are some extra large candy shots for ya'll. This time I'm going to let them speak for themselves.
http://www.bandwidth.se/imgs/39/226/img7754.jpg
http://www.bandwidth.se/imgs/39/226/img7760.jpg
http://www.bandwidth.se/imgs/39/226/img7762.jpg
http://www.bandwidth.se/imgs/39/226/img7765.jpg
http://www.bandwidth.se/imgs/39/226/img7767.jpg
http://www.bandwidth.se/imgs/39/226/img7768.jpg
http://www.bandwidth.se/imgs/39/226/img7771.jpg
http://www.bandwidth.se/imgs/39/226/img7776.jpg
http://www.bandwidth.se/imgs/39/226/img7789.jpg
Again, THANK YOU for your support throughout the build so far
I don't know if you'll notice, but I skipped the internal cover and went with an open view. Wanted to see the pumps and wanted the case to be a bit more flexible. No bigge.