I still use an air cooler ^^
This one
http://www.xsreviews.co.uk/images/nirvana/stock.jpg
IŽd like to know what i can reach under water :D
Printable View
I still use an air cooler ^^
This one
http://www.xsreviews.co.uk/images/nirvana/stock.jpg
IŽd like to know what i can reach under water :D
http://farm4.static.flickr.com/3563/...81440771_o.png
Decided to test my Q9550 on a A3 rev board, just threw in some voltages, here it is...
1.32V NB, 1.25V VTT, 8GB RAMs
Nice and easy going! Which mobo is this on?Quote:
Originally Posted by sabe
This is on a replacement board DFI P45-T2RS PLUS I got as a loan because my DFI JR P45 died :P
les_paulde In spite of your helps mobo and cpu failed at 500 fsb. there is something else limiting me I think.Thank you for your help. my max daily fsb 483 FSB x8.5 memory @ 1160 mhz. after 3.5 hours of prime I stopped it. It ended without errors and warnings
http://img149.imageshack.us/img149/6928/bench.jpg
Question for you sabe -- is it pretty much given that most DK PLUS boards have the A3 chipset lately, do you know?Quote:
Originally Posted by sabe
What mobo would you choose for a Q9550 E0? I have seen some really good results with the Giga P45-UD3R/P series. Anything else?
I couldn't really give you an answer on this one, it really depends on how much the retailer moves his stock and whether he always moves out the old boxes first. But I've bought this board on 2 other occasions new to help friends out with their rigs and it was both A3.Quote:
Originally Posted by vws
They sell to me one q9550 batch l828a844 it(he) is good? Is it(he,she) E0 or c1? THAT vid will have
http://www.abload.de/thumb/prime_425...tunden3gev.jpg
I had some fun tonight ^^
helpme plizzz
I'm assuming you haven't heard about the intel spec finder then?Quote:
Originally Posted by Mikefra2008
http://lmgtfy.com/?q=intel+spec+finder
That site will tell you everything you need! :yepp:
@sabe : occt stable too ? because I just discover my settings stable with linx but occt crash after 3-5 mins ... so I re-set to stable on both ...
My Q9550 E0 L828B096 :
436*8.5
vcore: 1.296v
GTL 0.630x
0.680x
PLL: 1.52v
VTT: 1.22v
vNB: 1.16v (0.660x)
-> Rock@Solid
For 450*8.5
vcore: 1.35v
Same GTL
PLL: 1.56v
VTT: 1.38v
vNB: 1.38v (0.660x)
-> Not Stable
It's Normal ???
:confused:
Helllp !
What kinda cooling are you using?Quote:
Originally Posted by 8800's@over
What are you guys using to post your SS's? Cannot seem to get anything to work now.
Was able to get my q9550 EO LinX and Prime Blend stable @500x8.5, 333strap 5:6 1200mhz. CPU vcore 1.35v bios, 1.312v cpuz, 1.30v VTT and 1.360v MCH. I Can thank my EP45 UD3P board for it, is a great board for overclocking core2quads.
www.imageshack.us has always worked well for me.
Paint.NET is a good freeware painting program for cropping and chopping.
RealTemp makes it easy to find your processor's specs.
Click on the About... menu item and then click on the Intel Spec Finder button at the bottom.
http://img510.imageshack.us/img510/6087/rt320.png
Thanks unclewebb. Not real clear but best I could figure out how to do lol. http://i587.photobucket.com/albums/s...rime500x85.jpg
Noctua NH-U12PQuote:
Originally Posted by Tekdemon
Idle 35° Cores
Load (intel Burn Test)
58° Cores (3.7GHz)
MotherBoard 35° Idle & Load.
my settings thus far:
UD3P (F9b Bios) Q9550 E0 (L835B166) pack date: 11/11/2008
LinX (Max Mem) 20X Stable - Yes
Robust Graphics Booster.....................[ Auto ]
CPU Clock Ratio.............................[ 8 ]
Fine CPU Clock Ratio........................[ 0.0 ]
CPU Frequency 4.0GHz........................[ 500*8.0 ]
******Clock Chip Control******
CPU Host Clock Control......................[Enabled ]
CPU Host Frequency (Mhz)....................[500 ]
PCI Express Frequency (Mhz).................[100 ]
C.I.A 2.....................................[Disabled]
******Advanced Clock Control******
CPU Clock Drive.............................[ 1000mv ]
PCI Express Clock Drive.....................[ 1000mv ]
CPU Clock Skew..............................[ 0ps ]
MCH Clock Skew..............................[ 50ps ]
******DRAM Performance Control******
Performance Enhance.........................[ Turbo ]
Extreme Memory Profile (XMP)................[ Disabled]
(G) MCH Frequency Latch.....................[ 400MHz ]
System Memory Multipler.....................[ 2.00d ]
Memory Frequency (Mhz) .....................[1000 DDR2]
DRAM Timing Selectable......................[ Manual ]
CAS Latency Time............................[ 5 ]
tRCD........................................[ 5 ]
tRP.........................................[ 5 ]
tRAS........................................[ 15 ]
******Advanced Timing Control******
tRRD........................................[Auto ]
tWTR........................................[Auto ]
tWR.........................................[Auto ]
tRFC........................................[Auto(52)]
tRTP........................................[Auto ]
Command Rate (cmd)..........................[Auto ] (PL=9)
******Motherboard Voltage Control******
Load-Line Calibration [Enabled]
CPU Vcore [ 1.25 ]...............[ 1.3500 ] (1.328 CPU-Z)
CPU Termination [ 1.20 ]...............[ 1.28 ]
CPU PLL [ 1.50 ]...............[ 1.570 ]
CPU Reference [ 0.760 ]...............[ 0.835 ]
MCH Core [1.1 ]...............[ 1.32 ]
MCH Reference [0.760 ]...............[ 0.850 ]
MCH/DRAM Refernce [0.900 ]...............[ 1.000 ]
ICH I/O [1.500 ]...............[ 1.500 ]
ICH Core [1.100 ]...............[ 1.100 ]
DRAM Voltage [1.800 ]...............[ 2.02 ]
DRAM Termination [0.900 ]...............[ 1.000 ]
Channel A Ref [0.900 ]...............[ Auto ]
Channel B Ref [0.900 ]...............[ Auto ]
******Advanced BIOS Features******
Limit CPUID Max to 3........................[ Disabled ]
No-Execute memory Protect...................[ Enabled ]
CPU Enhance Halt (CIE)......................[ Disabled ]
C2/C2E State Support........................[ Disabled ]
C4/C4E State Support........................[ Disabled ]
CPU Thermal Monitor.........................[ Enabled ]
CPU EIST Function...........................[ Disabled ]
Virtualization Technology...................[ Disabled ]
Nice going with the 500 fsb spinejam! What was your PL set to?
thanks!Quote:
Originally Posted by OC Nub
PL = 10 (per memset 4.0) :)
You may be able to use PL9 with Frequency Latch 400-200d.Quote:
Originally Posted by spinejam
Try 471 of FSB, I have tried:
0.60x
0.63x
0.64x
0.66x
0.65x
0.65x
0.65x
0.67x
0.69x
0.69x
PLL 1.54v - 1.56v - 1.58v
VTT 1.30v - 1.32v - 1.36v
NB 1.30v-1.32v - 1.36v
GTL - .64 x .65 x .66 x
CPU and NB Skew 100 and 200PS
Do not pass the 2 / 5 IBT test.
What can be?
The memories are stable.
I dont know what is good for a Q9550 E0, but mine is 1.19v VID and runs 425*8.5 @ 1.21v VID or otherwise 1.21v Vcore. I haven't bothered going any higher on my current DFI board with this chip. But it happily runs 3.6ghz @ 1.20-1.21V with EIST/C1 enabled.