CyberGreen Project *Pic Heavy!*

looks great. love the black and green.

So, a few new pics. Routed the pci-express cable new.

http://www.abload.de/img/dscf20291m1.jpg

http://www.abload.de/img/dscf2027xty.jpg

http://www.abload.de/img/dscf202824h.jpg

very nice

/borat

OUTSTANDING! Small changes that make a huge difference! Plus the photo-quality makes a big difference to judge it. Keep it going!

Quote:

---

Originally Posted by twwen2

Looking real good there Steffen. One question: What did you use to sleeve the ATX connectors on the HX520? lyl and i are both having a hard time getting the pins out of our HX620 connectors, they don't want to budge.:shrug:

I'm using the Sunbeam PSU modding kit.

---

Used the A.C.Ryan Pin Remover. The pins are pretty tight fit in there, but if you put the pin remover a little around and pull
a bit harder on the cable (not to hard) they come out. A fight between cable and connector has begun :D

build looks great but one thing that i must point out.

the tubes finish are dull! im a victim of that myself
but what ive tried and works is polishing the tubes :)
not really hard and is pretty simple to do.

with masterkleer tubing, i give it a nice blast of heat
with my heat gun and it makes it much softer and
smoother. probably dangerous but, i really need to look
up the max temp for those tubes lol

i think you need some tygon.. it would really make the
build, the dull tubes are killing it!

Quote:

---

Originally Posted by Steffen

Used the A.C.Ryan Pin Remover. The pins are pretty tight fit in there, but if you put the pin remover a little around and pull
a bit harder on the cable (not to hard) they come out. A fight between cable and connector has begun :D

---

Thanks for replying. It is most definately a fight. I've managed to get one pin out in 2hrs of swearing and cursing :(. Must be something more to it. I'll grab that AC Ryan tool, most ppl said they used that one.

looks great :clap:

Quote:

---

Originally Posted by evil-98

build looks great but one thing that i must point out.

the tubes finish are dull! im a victim of that myself
but what ive tried and works is polishing the tubes :)
not really hard and is pretty simple to do.

with masterkleer tubing, i give it a nice blast of heat
with my heat gun and it makes it much softer and
smoother. probably dangerous but, i really need to look
up the max temp for those tubes lol

i think you need some tygon.. it would really make the
build, the dull tubes are killing it!

---

AWESOME ! Could only be better with the shiny tubes.^

Quote:

---

Originally Posted by evil-98

build looks great but one thing that i must point out.

the tubes finish are dull! im a victim of that myself
but what ive tried and works is polishing the tubes :)
not really hard and is pretty simple to do.

i think you need some tygon.. it would really make the
build, the dull tubes are killing it!

---

I agree. As stunning as the build is (and stunning most definately is) the masterkleer prolly wasn't the best choice. But if you like it, that's all that matters :up:

Oh my god, i finally bleeded the system completly. What a hell trip.
But i could had have it easier if knew the trick to do on this system ^^

Steffen, looks wonderful. It went together great!

Well it´s not done yet but thanks for the charming comment :)

A few new pics. Still work in progress.
As you can see, on every picture the color of the coolant looks different. So i have to keep an eye on the light for the snapshots :)

http://www.abload.de/img/dscf2037h7f.jpg

http://www.abload.de/img/dscf2038d2s.jpg

http://www.abload.de/img/dscf20397lj.jpg

http://www.abload.de/img/dscf2040o3a.jpg

http://www.abload.de/img/dscf2044x4e.jpg

I love it, black and green is the best combination.

How do you keep it clean and without dust ?

I would like to be on sysprofile but my german is bad, can we see someday sysprofile in english ??

Quote:

---

Originally Posted by ultimeus

I would like to be on sysprofile but my german is bad, can we see someday sysprofile in english ??

---

We will see :)

Quote:

---

Originally Posted by Steffen

We will see :)

---

Great :D

Quote:

---

Originally Posted by ultimeus

How do you keep it clean and without dust ?

---

?? Are you working in a sterile room ? :p:

Muahaha. My room is far away from sterile. As i said at some point in this thread i got two budgies in here.
So the dust is just horrible. Before i take pictures i dust it off. But it´s not so horrible in the case itself. Only on the top.
When the frontplate arrives the inside should be a lot cleaner.

Looks amazing Steffen - so clean!

I'm working on that faceplate Mate, hang in there! :)

I'm standing in front of my house to wait for the delivery, hang in there! ;)

Quote:

---

Originally Posted by charles_h

Looks amazing Steffen - so clean!
I'm working on that faceplate Mate, hang in there! :)

---

Yay, i hope it´s gonna be done soon :)
Going to a lan party on the 10th july, but i think it´s not done until then. Or? ^^

BTW: You like it? Wow :)

Quote:

---

Originally Posted by dualbrain

I'm standing in front of my house to wait for the delivery, hang in there! ;)

---

CATCH THE PACKAGE! :D

incredible, great pics steffen :up:

the fact that the tubing isn't shiny doesn't bother me at all with this build. i actually think it looks pretty good with the somewhat cloudy tubing.

can't wait to see the frontplate! :D

Small update. Orderd myself a acetal top for the nickel ek cooler.
Should fit better with the acetal cpu cooler :)