lookin good, evil
Printable View
lookin good, evil
Lookin good Evil, as always.. Damn pm.. Evil, can you drop me an email when you get a chance?
bigdaddy501 at h0tmail d0t com?
Thanks. Got another q about your Sunbeam RE
Evil where you live
It only take 2working days from EK to UK.
So Even though I just come in from a 9hour night shift I going to stay up all day waiting for the postman. God damn I just hope it yurns up :d
too lazy to read through the thread, so I don't know if you mentioned it but...you're looking at a top mount MCR220, and bottom part is 320+220 right?
any updates?
sort of, well i received my SB top a few days agoQuote:
Originally Posted by Matias23
and im starting to work on the homewrecker again
been keeping my self busy with day and night. but
ill be starting up again to night, after i clear some
space for the sucker. as of now, im going to drop
everything back into the system to make sure the
system functions properly then to the detailed mods
still worried about pump placement etc, ive decided
im going to do my loops like this;
first off, having issues with mounting the MCR320
up top, i will be mounting a MCR240 on top, with
a second MCR240 below in a series, these rads
will cool both GPUs
i havent decided weather or not to put the mobo
blocks in the same loop as the GPUs or the CPU
and im wondering if the two MCR240s will be have
similar or better results compared to the 360GTX
if anyone has a 240GTX in good condition, im willing
to trade off a MCR320 for it, so if anyone knows
someone please let them know, have there people
call my people and well talk :up:
stay tuned for additional updates :up:
thanks for the interest guys
What kind of issues u are talking about i have TJ07 as well and have BlackIce 360 mounted on top without any problems. There is not much space between rad plus fans and mobo but there is 3-4mm space.
UPDATE!!
ek top is on and ready! wish i had tube to spare i need to
flush the system, but i have any to spare anyways just some
progress, im impressed with eddy, he fix the SB right up! :up:
http://evil98.insanity-asylum.com/co...ecker2/108.jpg
http://evil98.insanity-asylum.com/co...ecker2/109.jpg
http://evil98.insanity-asylum.com/co...ecker2/110.jpg
http://evil98.insanity-asylum.com/co...ecker2/111.jpg
http://evil98.insanity-asylum.com/co...ecker2/112.jpg
http://evil98.insanity-asylum.com/co...ecker2/113.jpg
http://evil98.insanity-asylum.com/co...ecker2/114.jpg
http://evil98.insanity-asylum.com/co...ecker2/115.jpg
http://evil98.insanity-asylum.com/co...ecker2/116.jpg
http://evil98.insanity-asylum.com/co...ecker2/117.jpg
http://evil98.insanity-asylum.com/co...ecker2/118.jpg
http://evil98.insanity-asylum.com/co...ecker2/119.jpg
oh! very good job evil;)
Whe dont drill a little the acrylic to put the leds in it? it will look better i think;)
Congrats for solving the sb problem;)
if in the future i go 3mm i will :up: but for now 5mm is just unsafeQuote:
Originally Posted by SaNxU
and i value my blocks too much to drill holes in them :shakes: for now :up:
nice evil more updates!
i like the new cam :)
p.s evil please get the ek acrylic top ....
outstanding work hopefully we will have some updates soon:)
That mobo is sexy:slobber: Definetly subscribed.
update!
alot of work needs to be done. the radgrill was horrible.. hole
placement was pretty bad, never though this would be an issue
but it turns out it was made more problems then solved. i think
the best thing to do is to commission a machinist to make me
one because i am not happy with the ACRYAN radgrill.. i still
to do some more cutting to the case to fully fit the rad with out
the fans touching the mobo/etc. cutting the case was not much
fun either, alot of hard manual labor, but it did get enough of it
cut where i could atleast install the rad for inspection.
started tubing the mobo, to find the new SB giving me issues
again, with 3/4" OD tubing there is NO, i repeat NO room to install
the second tube, i switched fittings in the end so the SB now uses
a slightly smaller barb so i could at least tiptie it down. its ok now
but i was surprised.
so loop orders go like this:
loop1: 24v D5 - 360GTX - EK Supreme - SB - NB - 150RES Rev1
loop2: DDC 3.2 w/ XSPC top - mosfet - mosfet - DD Ione - DD Ione - 150RES Rev2
http://evil98.insanity-asylum.com/co...ecker2/120.jpg
http://evil98.insanity-asylum.com/co...ecker2/121.jpg
http://evil98.insanity-asylum.com/co...ecker2/122.jpg
http://evil98.insanity-asylum.com/co...ecker2/123.jpg
http://evil98.insanity-asylum.com/co...ecker2/124.jpg
http://evil98.insanity-asylum.com/co...ecker2/125.jpg
http://evil98.insanity-asylum.com/co...ecker2/126.jpg
http://evil98.insanity-asylum.com/co...ecker2/127.jpg
http://evil98.insanity-asylum.com/co...ecker2/128.jpg
http://evil98.insanity-asylum.com/co...ecker2/129.jpg
http://evil98.insanity-asylum.com/co...ecker2/130.jpg
http://evil98.insanity-asylum.com/co...ecker2/131.jpg
Cheers :toast:
Very,very,very clean!
Amazing! nice build!
regards
Look very nice keep going :up:
w00t!! Looking super sexy evil!!!! :up: :D
MORE UPDATES!!!!!!!! :p:
very very nice. whats the meanwell for?
i might have not picked this up, but evil, are those compression barbs you using 1/2" ID 3/4" OD, i was assuming they are because you are using DD fat boys with them so they must link to 1/2"..
Thanks
VERY nice and clean build BTW, everything looks like its going perfect, although i would of loved it if you went full compression fitting system :)
compression fitting would not fit on his SB though...
Where did you get your black clamps for you EK res's? I broke my acrylic one's and need something a little more reliable.
http://www.petrastechshop.com/ekmureho.htmlQuote:
Originally Posted by Sadasius
Thank you! Petra was out of stock so I did end up finding them on the EK site.
im going to test the D5v at 24v :up: from swiftech efficiency curvesQuote:
Originally Posted by septim
its .75 GPM higher at the same head pressure. now thats not compared
to an aftermarket top, which ill have to look into, but generally its
higher flow and more head pressure and thats both a plus :up:
those are 1/2" ID 3/4" OD, bitspower. now septim is correct, almostQuote:
Originally Posted by NoobCake
nothing will fit on the SB, i had to switch from fat boys, to DD hi flow
stubs, which have a much smaller OD and ID, it all works out in the
end so its ok. i would love to have full compression fittings care to
sponsor? :up:
i got mine from PPCS, which i am slowly moving away from, i sent anQuote:
Originally Posted by Sadasius
RMA request months ago with ZERO reply, i had called with little luck
and request for a exchange with the same response.. :down:
@everyone else:
thanks for the replies, as an update ive started to design a new rad
grill for the case, i finished the bases but turns out swiftech's site
gives horribly wrong dimensions... very wrong dimensions. i need to
triple check again when i get home but after measuring the rad and
fan i need to redesign the grill. but when its done, i should be able to
drop in the MCR320 with 25mm fans with little to no issue :up:
cheers
Sorry for an off topic question, but would those Mosfet and Chipset Water blocks fit an Asus Rampage Formula X48?
I was looking to do something similar to this (though not quite as nice) with water cooling the whole board, but I can't find any blocks that say they are "Rampage Compatible".
Thanks